What is the reason for the Hongqi HS5's voice system having no sound?

1 Answers
VanWillow
07/28/25 6:19pm
The reasons for the Hongqi HS5's voice system having no sound include the volume not being turned on, incompatible pairing codes, etc. The specific explanations are as follows: Volume not turned on: The volume on the car navigation system or mobile phone is not turned on. Go to the phone's "Settings > Sound," find the "Media" option, and increase the "Media" volume. The same applies to the car navigation system. Incompatible pairing codes: Some mobile phones (such as iPhones) have music playback programming that is incompatible with certain car models' pairing codes, so they can only receive calls but not play music. Solution: It is recommended to change the Bluetooth playback frequency band to resume normal usage. Multimedia not enabled: The multimedia music feature of the car Bluetooth is not enabled. Solution: Find the multimedia option on the screen, enter it, and select Bluetooth music playback.
Was this review help?
13
3
Share
More Forum Discussions

What are the differences between automatic transmission and manual transmission?

Automatic transmission can automatically shift into different gears based on engine load and vehicle operating conditions. Manual transmission requires the driver to manually shift the gear lever to change the gear engagement position inside the transmission, thereby altering the gear ratio to achieve speed variation. The two differ in the following aspects: 1. Transmission efficiency: Manual transmission is purely mechanical, while automatic transmission relies on hydraulic transmission via a torque converter, resulting in differences in working efficiency, which directly leads to variations in fuel consumption. For cars of the same brand and displacement, manual transmission vehicles can save about 10% more fuel than automatic transmission vehicles. 2. Ease of operation: Automatic transmission has a significant advantage in this aspect. 3. Maintenance costs: Automatic transmission has higher maintenance costs.
6
2
Share

Can Vehicle Inspection Be Done in Advance?

Vehicle annual inspection can be conducted in advance, currently allowing for an early inspection up to 60 days before the due date. Below is a brief introduction regarding early vehicle inspection: 1. Required Documents: Bring your driver's license, ID card, vehicle registration certificate, and the current valid compulsory traffic insurance policy. 2. Important Notes: Vehicle inspection can be scheduled up to 60 days in advance. Owners should plan their time wisely to avoid overdue inspections, which may result in fines and a 3-point penalty. Before the inspection, check for any outstanding traffic violations. Any existing violations must be resolved; otherwise, the vehicle will not be inspected.
8
4
Share

What to Do When the Entire Car Loses Power During Startup?

When the engine is running normally, but the dashboard lights gradually dim until the engine stops running and the lights go from dim to completely off, this indicates a total loss of power in the vehicle. The specific solution depends on the situation, as analyzed below: 1. If the entire car loses power during normal engine startup: It may be due to a malfunction in the car's alternator, which requires timely inspection and repair. It could also be an electrical issue, such as a ground fault in the vehicle's wiring harness or excessive current caused by improperly modified wiring, leading to burnt wires. The problematic circuit should be promptly addressed. 2. If the entire car loses power when the engine is not running: It may be due to a faulty battery. In this case, contact a rescue vehicle to connect jumper cables for temporary charging to start the engine. Alternatively, if jumper cables are unavailable, use a tow-start method to start the car.
4
0
Share

What Causes the Dashboard Lights Not to Work?

The reasons for dashboard lights not working are as follows: 1. The dashboard illumination light is damaged. 2. The power supply wire of the dashboard is broken. 3. The dashboard power supply fuse is blown. 4. The solution is to check the dashboard power supply fuse and replace it if blown; disassemble the dashboard, as the illumination lights are usually located at the rear of the dashboard, and replace the non-working illumination lights. Below is additional information about dashboard lights: 1. Indicator light on: Immediately observe the odometer. If the accumulated mileage reaches or exceeds 100,000 km, the timing belt must be replaced; otherwise, the timing belt may break, causing the engine to malfunction. 2. Turn off the indicator light: After replacing the new timing belt, remove the rubber plug covering the reset switch on the odometer panel, press the internal switch with a small rod to turn off the timing belt indicator light. 3. Troubleshooting: If the indicator light does not turn off after operating the reset switch, it may be due to a malfunctioning reset switch or a short circuit in the wiring, which should be inspected and fixed. After replacing the new timing belt, also remove the odometer and reset all readings on the odometer to "0."
18
1
Share

What Causes the Buzzing Noise When Accelerating a Car?

The specific reasons for the roaring noise from the engine during acceleration are as follows: 1. Exhaust pipe leakage: When there is a leak in the intake or exhaust pipe, the vehicle will produce a loud roaring sound as the exhaust rate increases during acceleration. 2. Dirty or clogged throttle: During acceleration, the engine load increases, requiring the throttle to open wider and more fuel to be supplied. If the throttle does not open to the optimal position due to dirt or clogging, it can result in poor air-fuel mixture ratio, causing noise during acceleration. 3. Engine misfire: An engine misfire refers to one or more cylinders not functioning properly. Common symptoms include insufficient vehicle power, severe shaking of the exhaust pipe, and a clear "popping" or "thumping" noise from the engine.
15
0
Share

What are the symptoms of engine cylinder scuffing?

Engine cylinder scuffing manifests through the following symptoms: abnormal engine operation, difficulty in vehicle acceleration, sudden rise in engine coolant temperature, excessive thermal expansion of engine pistons, piston rings, and cylinder block, insufficient clearance between cylinder and piston, and piston seizure within the cylinder. Cylinder scuffing is one of the common failures in automotive engines, referring to deep grooves being formed on the cylinder wall, which leads to loss of sealing between the piston, piston rings, and cylinder wall during friction, resulting in reduced cylinder compression pressure and loss of power. An engine is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (such as Stirling engines, steam engines, etc.), jet engines, electric motors, among others.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.