What is the reason for the hill start assist fault displayed on the Emgrand GL dashboard?

3 Answers
CamilaLee
07/29/25 11:08am
The reason for the hill start assist fault displayed on the Emgrand GL dashboard is that the Emgrand GL is equipped with a hill start assist function; when starting on a certain slope, there is a three-second period to prevent the car from rolling backward. The following is an introduction to the Emgrand GL: 1. Interior: The Emgrand GL continues the aviation-inspired wraparound cockpit design and the family-style arched bridge curve instrument panel design. The control console adopts a one-piece layered center console design, which is simple and elegant with clear layers. The Emgrand GL pays great attention to the embodiment of quality. The 'metal brushed' texture interior panels and the metal trim strip running across the center console are integrated with the streamlined interior door handles, highlighting a sense of refinement in simplicity. In addition, the Emgrand GL also adopts the high central channel design of luxury brand models, which not only enhances driving safety but also adds a sense of class. The materials and craftsmanship in the Emgrand GL's interior also adhere to a very high standard, with extensive use of soft-touch plastic materials that are comfortable to the touch; the seats and door interior panels use a dark brown + all-black dual-tone color scheme; the leather seats and leather-wrapped armrests with neat stitching craftsmanship create a driving atmosphere with a strong sense of quality and class. 2. Intelligent Interaction System: The Emgrand GL is equipped with a 3.5-inch TFT color screen trip computer and an 8-inch touchscreen, as well as intelligent connectivity systems such as G-Netlink, G-Link, and CarPlay. Technological functions such as GPS navigation and voice control reflect the intelligence and convenience of the Emgrand GL's configuration.
Was this review help?
11
3
Share
TravisLee
08/13/25 5:36pm
As an ordinary car owner, I experienced this issue with my Emgrand GL last year. While driving on a steep slope, the dashboard suddenly lit up with a hill-start assist fault warning light, which was quite unsettling. After some research, I found that the most common cause is dirt or damage to the wheel speed sensor. These sensors are located near the wheels and can easily get clogged with mud or debris, leading to false alarms from the system. Another frequent issue is wiring problems, such as loose connectors or aging wires, which can interfere with signal transmission. There's also the possibility of a control module issue, as the hill-start assist relies on the vehicle's computer system—software bugs or module failures can trigger false warnings. Additionally, problems with the brake system's pressure sensor can easily activate this fault since hill-start assist uses the brakes to prevent rollback. If the warning light remains on after a simple vehicle restart, it's best to get it checked as soon as possible; otherwise, the car might roll back when starting on a slope, which is quite dangerous. For a self-check, you can try cleaning the wheel sensors, but professional diagnostic tools are needed for accurate troubleshooting.
Was this review help?
11
1
Share
Expand All
JulietMarie
10/08/25 2:30am
I've found that hill start assist failures in the Emgrand GL often stem from minor electronic system issues. Faulty wheel speed sensors or tilt sensors are the primary culprits, as their low mounting position makes them prone to moisture damage. Software glitches in the control unit shouldn't be overlooked either - incomplete updates or compatibility issues can trigger the warning light. Wiring breaks are even more common; inspect the connections from sensors to the ECU for wear or corrosion. Voltage fluctuations during engine startup may also interfere with the system, disrupting proper hill assist function. A simple solution is using an OBD scanner to read trouble codes - temporary bugs might be resolved by clearing the codes. But if the problem recurs, conduct a thorough inspection of sensors and control modules. Remember, never ignore this fault, especially when parking on slippery surfaces, as system failure increases rollaway risks.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

Can I still renew my driver's license if I fail the vision test during the medical examination?

Renewing a driver's license is not allowed if you fail the vision test during the medical examination. The renewal and verification must meet the following conditions: Holders of large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck driver's licenses must have no demerit points in the current scoring cycle, or holders of other types of driver's licenses must have fewer than 12 demerit points in the current scoring cycle; Holders of large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck driver's licenses who have demerit points in a scoring cycle, as well as holders of other types of driver's licenses who have been involved in a traffic accident resulting in death and bear equal or greater responsibility but have not had their driver's license revoked, must have completed the verification education; The applicant must have no pending road traffic safety violations or traffic accidents; The applicant's physical condition must meet the driving license requirements; The driver's license must not be under circumstances of being legally seized, detained, temporarily suspended, revoked, canceled, or annulled.
18
0
Share

What are the functions of the various gears in a manual transmission car?

Manual transmission gear functions are introduced as follows: 1. First gear is the starting gear, used when the car begins moving from a complete stop. Another meaning of the starting gear is that it's only used for starting - once the car starts moving, you need to shift to second gear. 2. Second gear is the driving gear, used when the car is moving at very low speeds. This means as long as the car is moving slowly without stopping, you can use this gear (not for high-speed driving). Some vehicles with higher idle speeds can even start moving in second or third gear by pressing the accelerator, though this operation is not recommended. 3. Third gear is the acceleration gear. Starting from this gear, you can use the accelerator to increase speed and bring the car to a certain velocity. 4. Fourth gear is the medium-high speed driving gear. On most urban roads (excluding elevated roads), this is generally the highest gear needed. Depending on the vehicle, it's typically used when maintaining speeds around 60-70 km/h. 5. Fifth gear is the high-speed gear, used only on elevated roads or highways, generally at speeds of 80 km/h or above. 6. R gear is the reverse gear, used when backing up the car.
9
4
Share

Is Replacing the Valve Cover Gasket Considered a Major Overhaul?

Replacing the valve cover gasket is not considered a major overhaul. The valve cover gasket is a wearable component of a car, and due to aging or other reasons, it may become loose or detached, leading to oil leakage from the valve cover. Therefore, it is essential to inspect the valve cover gasket regularly. The engine valve cover primarily serves a sealing function to prevent oil leaks. It should be inspected every 20,000 kilometers, and if worn, it should be replaced promptly. A faulty valve cover gasket can easily cause oil leakage from the valve cover, posing safety hazards. There are two main reasons for valve cover oil leakage: poor assembly process and aging of the valve cover gasket. 1. Poor assembly process: If there are issues during the assembly of the valve cover, it can easily deform under pressure, leading to oil leakage. In such cases, the valve cover should be reassembled, and if necessary, replaced with a new one. 2. Aging of the valve cover gasket: When a car has been owned for too many years or has been driven for an extended mileage, the aging of the valve cover gasket is a normal occurrence. In this situation, simply replacing the valve cover gasket and sealing ring will suffice.
18
4
Share

What are the criteria for choosing between recirculation and fresh air mode in car air conditioning?

Car air conditioning recirculation and fresh air mode selection criteria are: when turning on the air conditioning for cooling or heating, first activate recirculation mode to quickly lower or raise the interior temperature. Once the temperature stabilizes, appropriately switch to fresh air mode to exchange air with the outside. The difference between recirculation and fresh air mode lies in the air intake source - recirculation draws air from inside the vehicle. The choice between recirculation and fresh air mode can be determined based on the following three situations: 1. If the car has been exposed to intense sunlight and the interior feels like a sauna, first activate fresh air mode for ventilation and heat dissipation after entering the vehicle, while also opening windows and sunroof to accelerate cooling. After 3-5 minutes when the interior temperature stabilizes, close all windows, turn on cooling, and switch to recirculation mode. 2. In extremely cold winters, delay turning on the heater until the engine reaches normal operating temperature. Then activating heater with recirculation mode can rapidly increase interior warmth. 3. During traffic congestion, it's best to use recirculation mode to prevent circulation of polluted outside air into the cabin.
13
0
Share

Can I continue driving if the front wheels cross the line during a yellow light that turns red?

If the vehicle has already crossed the stop line when the light turns yellow, it can continue driving and it is not considered running a red light. According to regulations, when the yellow light is on, vehicles that have already crossed the stop line can continue to pass. Running a red light is determined by three photos: one showing the front of the vehicle crossing the stop line during the red light, one showing the rear of the vehicle crossing the stop line, and one showing the entire vehicle completely passing the crosswalk. All three conditions must be met to be considered running a red light. According to Article 38 of the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China': 1. When the green light is on: vehicles are allowed to pass, but turning vehicles must not hinder the passage of straight-moving vehicles and pedestrians; 2. When the yellow light is on: vehicles that have already crossed the stop line can continue to pass; 3. When the red light is on: vehicles are prohibited from passing.
9
5
Share

How many hours does it take to replace a timing belt?

Generally, it takes about 2-3 hours to replace a timing belt. The cost for replacing a timing belt, an alternator belt, and a tensioner pulley is usually around 600-800 RMB. If the water pump has issues and needs to be replaced together, including maintenance and labor fees, the total cost would be around 1000-1500 RMB. Once the timing belt shows signs of aging or cracking, it must be replaced immediately. It is recommended to replace the timing belt every 80,000-100,000 kilometers. Replacing a timing belt requires certain technical skills and methods. For those who are skilled and wish to replace the timing belt themselves, here is a brief introduction to the replacement process: 1. Rotate the crankshaft pulley to align the pulley notch with the protrusion on the oil pump housing, adjusting the timing point. 2. Remove the crankshaft pulley bolt and the crankshaft pulley. 3. Remove the timing belt lower cover and the guide pulley. 4. Remove the timing belt tensioner pulley and the belt; Installation: When installing the belt, ensure it is tight and not loose. After aligning the timing point, use a hex wrench to adjust the pointer and tighten the tensioner pulley. Use a socket to rotate the crankshaft clockwise twice to ensure the timing points are accurately aligned.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.