What is the reason for the Great Wall H2 rear door lock not working?

How to Use Cruise Control with a Manual Transmission?

Steps to use cruise control with a manual transmission: 1. Locate and press the cruise control button on the steering wheel; 2. When the car reaches the desired cruising speed, press the set button downward; 3. After setting the cruise control speed, you can press the button upward or downward to fine-tune the cruising speed; 4. While using cruise control, always pay attention to road conditions. Cruise control can be used at speeds of 40 km/h and above. Cruise control refers to maintaining a set speed without pressing the accelerator pedal, allowing the vehicle to travel at a constant speed. When the cruise control function is activated, you can press the accelerator to exceed the minimum cruise control speed. Once the cruise control function is confirmed, the engine will automatically supply fuel to meet the power demand for the current speed.

10

1

Share

Does the Lynk & Co 02 have a 4-cylinder engine?

Lynk & Co 02 does have a 4-cylinder engine. Taking the 2019 Lynk & Co 02 as an example, all models equipped with the 2.0T engine are four-cylinder. In terms of power, the Lynk & Co 02 is equipped with two engines: one is a 1.5-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine of the Lynk & Co 02 has a maximum power of 132 kW, a maximum torque of 265 Nm, and a maximum power speed of 5,500 rpm. The Lynk & Co 02 is positioned as a compact SUV, with body dimensions of 4,448 mm in length, 1,890 mm in width, and 1,528 mm in height, and a wheelbase of 2,702 mm.

14

4

Share

How many cylinders does the Qashqai engine have?

The Qashqai is equipped with a four-cylinder engine, specifically a 2.0-liter naturally aspirated four-cylinder engine with the model code MR20. It delivers a maximum power of 113 kW and a maximum torque of 204 Nm. The engine reaches its peak power at 6,000 rpm and its peak torque at 4,400 rpm. This engine is paired with a CVT transmission. The Qashqai is positioned as a compact SUV, with body dimensions of 4,401 mm in length, 1,837 mm in width, and 1,593 mm in height, and a wheelbase of 2,646 mm. In terms of suspension, the Qashqai features a MacPherson strut independent front suspension and a multi-link independent rear suspension.

2

Share

What is the minimum ground clearance of the 2019 Golf?

The minimum ground clearance of the 2019 Golf is approximately between 115mm and 135mm. Below is a detailed introduction to the minimum ground clearance: 1. The vehicle's minimum ground clearance, also known as chassis height, refers to the distance between the lowest protruding part of the chassis and the horizontal ground when the car is fully loaded. The minimum ground clearance data directly reflects the car's ability to pass through complex road surfaces without obstacles. 2. For ordinary family sedans, the minimum ground clearance typically ranges from 11 to 15 centimeters. From the perspective of sedan characteristics, if the chassis height exceeds 130mm, the car's off-road performance is better, but at high speeds, it affects stability. The smaller the chassis height (generally below 11 centimeters), the more stable the handling at high speeds, but the poorer the off-road performance.

3

4

Share

How many kilometers can a Lavida run when the fuel gauge shows 0?

When the fuel gauge of a Lavida shows 0, it can still run approximately 20km. Emergency measures for insufficient fuel are as follows: 1. Turn off all electrical appliances in the car, including air conditioning, lights, anti-theft devices, and defoggers. 2. Close the windows to reduce wind resistance and save fuel. 3. Control the speed. For vehicles with a displacement of 1.3-1.8L, the optimal speed is between 45-65km/h; for 2.0-3.0L models, the optimal speed is between 55-75km/h. 4. Minimize braking as much as possible. Even when forced to brake, consider reasonably reducing the duration and frequency of braking. 5. Call for a tow truck or fuel delivery service.

15

1

Share

The Difference Between Torsion Beam and Independent Suspension

Independent suspension has the advantages of being lightweight, reducing the impact on the vehicle body, and improving the ground adhesion of the wheels; the torsion beam's advantages are its simple structure, ease of maintenance, and high strength to withstand external collisions. More related information is as follows: 1. Advantages: Independent suspension means that the wheels on each side of the car are individually suspended under the frame or body through an elastic suspension system. Its advantage is that the wheels on both sides can move independently without interfering with each other, reducing the tilt and vibration of the body, which is beneficial to the smoothness and handling stability of the car, improving the ride comfort. 2. Configuration: Depending on the structural form, independent suspension systems can be further divided into MacPherson strut, double wishbone, multi-link, and torsion bar types. Among these independent suspensions, the MacPherson suspension is the most flexible and versatile, with many variants and the widest application.

7

0

Share

What is the reason for the Great Wall H2 rear door lock not working?

How to Use Cruise Control with a Manual Transmission?

Does the Lynk & Co 02 have a 4-cylinder engine?

How many cylinders does the Qashqai engine have?

What is the minimum ground clearance of the 2019 Golf?

How many kilometers can a Lavida run when the fuel gauge shows 0?

The Difference Between Torsion Beam and Independent Suspension

How to Use the Auto Hold Function in a Car?

How Many Hours Can a Parking Air Conditioner Last?

What maintenance should be done for tires?

How Long Can a Volkswagen Wet Dual Clutch Transmission Last?