What is the reason for the failure of the Envision's auto start-stop system?

Do You Need to Wait for a Red Light in a U-Turn Lane?

If the gap is marked with a dashed line, the U-turn is not affected by traffic signals and does not require crossing the pedestrian crossing. You can make a U-turn directly as long as it does not interfere with other normally moving vehicles and ensures your own safety. If the gap is marked with a solid line, then the U-turn must cross the pedestrian crossing and is subject to traffic signals. Note that U-turns are not allowed on pedestrian crossings. Violations will result in a 3-point deduction and a fine according to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China." If you need to cross the pedestrian crossing to make a U-turn, you must yield to pedestrians: Pedestrians walking on the right side of the road's crosswalk without reaching the centerline. Vehicles on the left side of the road should slow down and proceed safely after ensuring safety. Pedestrians waiting outside the boundary of the motorized and non-motorized lanes. If they have not entered the roadway, vehicles should slow down and proceed safely after ensuring safety. If pedestrians cross the boundary between motorized and non-motorized lanes, vehicles failing to stop and yield are committing a violation and should be penalized. When pedestrians enter the motorized lane (Lane A) via the crosswalk, vehicles in Lane B should slow down and proceed safely after ensuring safety. If vehicles in Lane A fail to stop and yield, it is a violation and should be penalized. Pedestrians waiting at the centerline of the road without entering the motorized lane. Vehicles failing to stop and yield are committing a violation and should be penalized. Pedestrians crossing the centerline into the motorized lane. Vehicles failing to stop and yield are committing a violation and should be penalized. If the road is divided by a green belt, pedestrians waiting in the middle of the road must be yielded to. Vehicles should slow down and proceed safely after ensuring safety. Cases where U-turns are allowed: Intersections with U-turn signs: If there is a clear U-turn sign at the intersection, you can make a U-turn. If there is a U-turn signal light, follow its instructions. If there is no signal light, make a U-turn without obstructing other vehicles or pedestrians. Intersections without explicit prohibitions: If there are no signs prohibiting U-turns or left turns, you can make a U-turn. "No explicit prohibition" means no "No U-turn" or "No Left Turn" signs, and no solid centerline. Yellow grid lines also allow U-turns: Yellow grid lines are no-parking zones at intersections prone to congestion due to temporary stops. Parking (including waiting for traffic lights) on these lines is a violation. However, U-turns are allowed in yellow grid zones unless there is a central barrier. Intersections with U-turn signal lights: If there is a U-turn signal light, follow it—only proceed on green. Signs prohibiting left turns but allowing U-turns: U-turns are allowed even if left turns are prohibited, but "No U-turn" is not the same as "No Left Turn." Things to note when making a U-turn at an intersection: Check road markings. If they are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable U-turn location. If there is a "No Left Turn" sign, even without a "No U-turn" sign, U-turns are not allowed at that intersection, as U-turns inherently involve a left turn. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, U-turns are not allowed at that intersection. Always yield to straight-moving vehicles before making a U-turn. Failing to do so will make you fully liable for any accidents. Near intersection stop lines, lanes often have guiding arrows. The leftmost lane is not always a left-turn lane. If it has a straight arrow, U-turns are prohibited even without explicit signs.

6

5

Share

Can a new car be driven on the highway?

New cars can be driven on the highway. Driving on the highway does not mean running the engine at high RPM. As long as the RPM does not exceed 3,000, it is generally not a big issue. A highway is a road specifically designed for high-speed vehicle travel. It is important to periodically change the speed and gear when driving a new car on the highway, as this allows the gears of each gear to break in properly and reduces excessive wear on any single gear. The concept of a break-in period dates back to the era of older cars when engine and other vehicle manufacturing processes were relatively crude, and the produced mechanical components were not very smooth, especially the engine. During the break-in process, many metal fragments would wear off and be flushed into the engine oil.

16

3

Share

What to Do When the Golf Trunk Is Stuck and Won't Open?

Here are the solutions for when the Golf trunk is stuck and won't open: 1. Make sure your trunk is actually locked. If it's not locked, using the key to unlock it won't have any effect. 2. If the car door is indeed locked, try using the key a few more times. Sometimes, if the trunk door isn't properly latched, the key might not work. 3. If the automatic lock is already unlocked but the trunk door still won't open, you'll need to manually release the manual lock. The specific method is to feel for the manual lock position with both hands, press it downward, and then try unlocking it with the key again to see if the manual lock engages with the opening mechanism.

11

0

Share

What is the correct way to use national standard seat belts?

National standard seat belts should be used correctly according to the following steps: Step 1: First adjust the seat position. Step 2: Adjust the seat belt position (applicable to most vehicle models). Step 3: Wear the seat belt correctly. The shoulder belt should cross the chest cavity, and the waist belt should fit snugly against the hip bone. Step 4: After buckling the seat belt, the buckle will make a "click" sound, but you should still pull the seat belt to ensure that the buckle is securely fastened and undamaged. Step 5: To release the seat belt, press the button on the seat lock body to release the latch tongue. The seat belt retractor on the latch tongue side will automatically retract the seat belt. Precautions: Pregnant women must wear seat belts. The waist belt should not rest above the belly but should be positioned below the lower edge of the belly, while the shoulder belt should simply cross the center of the chest.

8

2

Share

What is the Challenger car?

challenger is the Dodge Challenger, a muscle car type introduced by Chrysler. Below are the specific details of the Challenger: 1. The most classic American car market should be the tripartite balance among General Motors, Ford, and Chrysler. 2. In terms of exterior design, the fenders feature GT badges to signify its identity. Additionally, it comes with iconic engine air intakes, a rear spoiler, and 19-inch wheels. 3. For configuration, it includes heated and ventilated seats, an 8.4-inch central control screen, and a heated steering wheel. An optional package is also available, featuring Alcantara seats, Alpine audio, and a sport steering wheel. 4. In terms of power, it is equipped with a 3.6L V6 engine, delivering a maximum power of 227kW (309PS) and a maximum torque of 336Nm. The transmission is an 8-speed automatic gearbox, paired with a full-time four-wheel-drive system.

9

4

Share

Which car has a phoenix as its logo?

A car with a phoenix logo is the Toyota Century. Here are the specific details about the Toyota Century: 1. The Toyota Century is a compact car. Taking the 2020 Toyota Century as an example, its body dimensions are: length 5335mm, width 1935mm, height 1505mm, wheelbase 3090mm, and curb weight 1990kg. 2. The 2020 Toyota Century features a front MacPherson independent suspension and a rear multi-link independent suspension. 3. It is equipped with a hybrid system consisting of a 5.0L naturally aspirated engine and an electric motor, delivering a maximum horsepower of 280ps, a maximum power of 394kw, a maximum torque of 460nm, and is paired with an 8-speed automatic transmission.

4

3

Share

What is the reason for the failure of the Envision's auto start-stop system?

Do You Need to Wait for a Red Light in a U-Turn Lane?

Can a new car be driven on the highway?

What to Do When the Golf Trunk Is Stuck and Won't Open?

What is the correct way to use national standard seat belts?

What is the Challenger car?

Which car has a phoenix as its logo?

How to reset the maintenance wrench indicator on Borgward BX5?

What is the Volkswagen dhideon?

Can the ECO mode be turned on for a long time?

What Causes the Squeaking Sound in Brakes?