What is the reason for the failure of the automatic locking latch on the Sail?

How to Solve the Problem of Wheels Not Moving After Rain?

Frequently move forward and backward about three times; Note: Do not repeatedly and forcibly drag the tires back and forth, as it may cause severe tire wear. Pour 100°C boiling water onto the position of the brake pads, then repeat method 1. The brake pads and brake drum will expand due to heat and automatically separate.

14

2

Share

What is the solution for the P013300 fault code?

It indicates that the engine oil level is insufficient and needs to be replenished. Adding too much oil will increase engine resistance, reduce power responsiveness, and result in increased noise. Use a support rod to prop up the engine hood of the new FAW-Volkswagen Santana, ensuring it is securely supported to avoid any hazards during operation. Unscrew the engine oil cap and add engine oil. The oil level should be between the upper and lower scale lines.

12

0

Share

Where is the tire pressure reset switch located on the Volkswagen Tiguan?

Tiguan's tire pressure reset button is located on the multifunction steering wheel. In the instrument cluster's multifunction display, select Settings, then scroll up and down to find the tire pressure option and choose Reset. Here is some information about tire pressure: 1. Function: Tire pressure, strictly speaking, refers to the air pressure inside the tire. In car maintenance, the engine is the heart of the car—engine damage will lead to the end of the car's life—while tire pressure is like the car's blood pressure. The level of tire pressure plays a crucial role in the car's performance and power. 2. Low tire pressure: This will increase tire deformation, making the sidewalls prone to cracks and causing flexing movements, leading to excessive heat, rubber aging, fatigue in the cord ply, and cord breakage. It will also increase the tire's contact area with the ground, accelerating wear on the tire shoulders. 3. High tire pressure: This will cause excessive stretching and deformation of the tire cords, reducing the tire's elasticity and increasing the load on the car while driving. If impacted, it may lead to internal cracks or blowouts. Additionally, excessive pressure will accelerate tread wear and reduce resistance to punctures.

7

5

Share

How to Check the Vehicle Model Code?

Vehicle model code can be checked as follows: 1. First, locate the vehicle registration certificate. 2. The reverse side of the registration certificate shows the vehicle photo, while the front side displays all vehicle information. 3. On the upper right portion of the registration certificate, there is a brand model field which indicates the specific vehicle model. Below is relevant information about vehicle model codes: Vehicle Model: Refers to the name given by manufacturers to vehicles with identical type, brand, category, series and body style. Vehicle identification codes consist of five parts: 1. Manufacturer code represented by 2 Chinese phonetic letters. Examples: CA for FAW, EQ for Dongfeng, BJ for Beijing, NJ for Nanjing. 2. Vehicle category code represented by 1 Arabic numeral: 1 for trucks; 2 for off-road vehicles; 3 for dump trucks; 4 for tractors; 5 for special purpose vehicles; 6 for buses (large/medium/small); 7 for passenger cars; 8 for trailers; 9 for semi-trailers/extended cargo trailers. 3. Main parameter code represented by 2 Arabic numerals: ① For trucks, indicates gross vehicle weight (curb weight + payload); ② For passenger cars, indicates engine displacement (unit: liters); ③ For buses, indicates body length (unit: meters). 4. Product sequence number represented by 1 Arabic numeral: 0,1,2 indicate model modifications/variants. 5. Manufacturer-defined code.

6

0

Share

How to Connect a Reversing Camera with Only One Red Wire?

Insert the accessory camera wiring harness into the rear license plate light drill hole, then snap it directly into place. The red wire is used to connect the video signal. Remove the left-side decorative panel of the trunk, connect the integrated data and power extension cable to the camera wiring harness, and route it along the original vehicle wiring harness from inside the rear trim panel. Reinstall the trunk components, then tuck the extension cable into the plastic panel gaps along the door edge all the way to the driver's side door edge.

8

1

Share

How to Set Up Porsche Ambient Lighting?

First, the owner needs to click the settings option on any multimedia interface. Then, select the ambient lighting option. Click the manual option at the top. At this point, the vehicle's ambient lighting can be turned on. The color option allows you to adjust the color of the ambient lighting. Interior ambient lighting is a decorative lighting feature, typically in colors such as red, blue, and green. It's important to note that the lighting color should not affect normal safe driving.

5

0

Share

What is the reason for the failure of the automatic locking latch on the Sail?

How to Solve the Problem of Wheels Not Moving After Rain?

What is the solution for the P013300 fault code?

Where is the tire pressure reset switch located on the Volkswagen Tiguan?

How to Check the Vehicle Model Code?

How to Connect a Reversing Camera with Only One Red Wire?

How to Set Up Porsche Ambient Lighting?

What to Do When LED Daytime Running Lights Turn Yellow?

How to Turn Off the Oil Light Flashing on an Iveco?

How to solve the P1338 fault code?

How to Set Up Automatic Folding Rearview Mirrors for ix35?