What is the reason for the erratic movement of the left window of the Refine S3?

Can car glass be polished?

Car glass can be polished. Polishing can repair minor damages on the glass and also remove oil film. Here are the relevant details: 1. Polishing can gradually refine imperfections such as scratches, cuts, burns, and corrosion on the glass surface, thereby achieving a repair effect. For some scratches, grinding treatment is needed first, followed by polishing for better results. 2. Toothpaste has a certain polishing effect, but it must be chosen carefully. Select toothpaste containing fine abrasive particles, apply it to the glass, and use a soft, clean towel dipped in water to wipe. This method has a certain grinding and polishing effect, which can repair some minor scratches and effectively remove oil film.

1

2

Share

What to Do If Too Much Engine Oil Is Added?

You can use a syringe and the plastic tube from an IV drip to extract the excess oil. Below are the methods to handle overfilled engine oil: 1. First, find a syringe and a tube commonly used for IV drips. Then insert it into the oil dipstick hole and start extracting. If you can't find these tools, you can also use a shampoo bottle as an alternative. 2. If too much oil is added, it can lead to oil burning. This happens because excessive oil increases pressure, causing more oil to be sprayed through the piston rings and increasing the amount of oil vapor forced through the crankcase ventilation. This raises the pressure on the oil separator, leading to incomplete separation and allowing large amounts of oil to enter the throttle through the exhaust pipe, where it is burned again, resulting in oil burning.

9

0

Share

Is the Touareg 530 V6 engine an imported engine?

The Touareg 530 V6 engine is an imported engine. More details about the Touareg are as follows: 1. The Touareg is a mid-to-large-size SUV under the Volkswagen brand, with dimensions of 5039*1989*1773 mm and a wheelbase of 2980 mm. 2. This vehicle is equipped with three types of engines: a low-power version 2.0-liter turbocharged engine, a high-power version 2.0-liter turbocharged engine, and a 2.5-liter V6 turbocharged engine. The Touareg's 2.5-liter V6 turbocharged engine delivers 299 horsepower and a maximum torque of 500 Nm. This engine reaches its maximum power at 6000 rpm and its maximum torque between 2750 to 3500 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head. The engine is paired with a 7-speed dual-clutch transmission, which enhances gear shifting speed and transmission efficiency. 3. The Touareg's front suspension uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. The multi-link independent suspension improves the wheel's ground contact performance, thereby enhancing traction.

19

1

Share

Is Fuel Additive Effective in Cleaning Carbon Deposits?

Fuel additive is effective in cleaning carbon deposits. The primary function of fuel additives is to clean carbon deposits and sludge. Their main components are cleaning agents and dispersants—one helps carbon deposits peel off, while the other breaks them down into tiny particles that are expelled from the engine through combustion. Below are other functions and benefits of fuel additives: 1. Purify gum substances in fuel and harmful materials like engine carbon deposits. Continuous use can remove carbon deposits from the fuel injectors, intake valves, and intake manifolds, restoring the vehicle's original performance. 2. Directly attack the long-chain carbon bonds in fuel molecules, creating micro-explosions in the combustion chamber to achieve secondary atomization of gasoline, promoting complete combustion, improving thermal efficiency, and reducing fuel consumption. 3. Protect the car engine, extend its service life, and prevent engine malfunctions. 4. Reduce engine noise and prolong the engine's lifespan. 5. Lower the activation energy of combustion, improve atomization efficiency, and ensure even non-combustible gum in the fuel burns completely, achieving the effects of eliminating black smoke and reducing emissions.

10

4

Share

Where are the accelerator and brake pedals located on the Vezel?

The accelerator pedal of the Vezel is located on the right side below the driver's seat, while the brake pedal is typically designed on the left side of the accelerator, to the right of the clutch pedal in manual transmission models. For automatic transmission models, braking simply requires pressing the brake pedal. It is important to note that during braking, the gear lever should not be shifted to neutral, as this can negatively affect the lubrication of the transmission gears, potentially damaging the transmission, and also prevents the use of engine braking. The Vezel's body dimensions are 4328 mm in length, 1772 mm in width, and 1605 mm in height, with a wheelbase of 2610 mm. It features front-wheel drive, a MacPherson strut front suspension, a torsion beam rear suspension, and a unibody construction.

18

2

Share

What Causes Vehicle Vibration When Braking?

When experiencing brake vibration during braking, first rule out a normal phenomenon where the ABS system causes the brake pedal to rebound during emergency braking. On slippery roads, when the ABS anti-lock braking system activates, the brake pedal may vibrate, which is normal. If confirmed as a fault, check whether the brake discs and pads are severely worn or if the runout exceeds tolerance, requiring measurement and replacement of faulty components. Below are the reasons for brake vibration during braking: 1. For manual transmissions, slight vibration in both the brake and clutch pedals is normal when the vehicle is in a low gear with high torque. 2. For automatic transmissions, pedal vibration when stopping at a red light in D gear is also normal; shifting to N or P gear will reduce the sensation. 3. Uneven tread wear on both sides of the tires or differing tire pressures can cause brake pedal vibration. 4. Warped brake discs can lead to vibration, especially during hard braking, in which case the discs should be replaced. 5. If the ABS warning light flickers during low-speed braking, check whether the ABS sensor is faulty. 6. A pulsating brake pedal and a "grinding" noise during high-speed braking indicate the ABS pump is working, which is normal. 7. Check if loose underbody screws are causing resonance.

18

3

Share

What is the reason for the erratic movement of the left window of the Refine S3?

Can car glass be polished?

What to Do If Too Much Engine Oil Is Added?

Is the Touareg 530 V6 engine an imported engine?

Is Fuel Additive Effective in Cleaning Carbon Deposits?

Where are the accelerator and brake pedals located on the Vezel?

What Causes Vehicle Vibration When Braking?

Can the Engine Still Run After Cylinder Scuffing?

Does Alcohol Damage Car Paint?

Do I need to warm up the car if it's not driven in winter?

Is the Audi A8 supercharged?