What is the reason for the EPC light on the Volkswagen Jetta and the inability to accelerate?

What Are the Structural Components of a Car?

The overall structure of a car is basically composed of four parts: engine, chassis, body, and electrical system. The following is an introduction to the structure of a car: 1. Introduction: A car is a non-rail, non-overhead-line vehicle that is driven by its own power device and has four or more wheels. 2. Purpose: The main purpose of a car is transportation, that is, to carry people and goods. 3. Difference: Cars are different from trains, trams, and trolleybuses that run on laid tracks or overhead power lines, tractors used for agricultural operations, and self-propelled construction machinery. In statistical classification, two-wheeled or three-wheeled motor vehicles, as well as combat vehicles with weapons and armor, are not considered cars.

18

2

Share

Differences Between Hatchbacks and Sedans

Differences between sedans and hatchbacks are as follows: 1. Different trunk sizes: Comparatively, the trunk of a sedan is larger than that of a hatchback. A sedan consists of three parts: the engine compartment, the passenger compartment, and the trunk compartment. If the trunk appears relatively small, then it is a hatchback. 2. Different properties: A sedan refers to a car whose body structure is composed of three separate, enclosed compartments with distinct purposes, while a hatchback refers to a car where the cabin and trunk are integrated into a single compartment. 3. Different structures: A sedan is divided into the front engine compartment, the middle passenger compartment, and the rear luggage compartment; a hatchback extends the passenger compartment backward at approximately the same height, combining the rear luggage compartment with the passenger compartment into one, reducing it to two "compartments"—the engine compartment and the passenger compartment—with no protruding rear luggage compartment.

17

5

Share

How to Handle a Tire Pressure Warning?

When a tire pressure warning appears and no visible damage is observed, you can simply inflate the tire to the normal pressure and reset the tire pressure system. If the tire is found to be punctured during inspection, drive to a tire shop promptly for a repair, then reinflate the tire. If the tire pressure warning reappears after inflation without any visible puncture, it might be due to air leakage caused by a deformed wheel rim; in this case, inspect the rim and consider replacing it. Tire pressure monitoring automatically checks the tire pressure in real-time while driving and alerts the driver to any leaks or low pressure to ensure driving safety. There are three common types of tire pressure monitoring systems: Direct Tire Pressure Monitoring: This system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure data is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to shrink, making it rotate faster than the other tires. By comparing the rotational speed differences among the tires, the system monitors the tire pressure. Indirect tire pressure monitoring relies on calculating the rolling radius to assess the pressure. Tire Pressure Monitoring System (TPMS) Overview: This system combines the advantages of both direct and indirect monitoring. It equips two diagonally opposite tires with direct sensors and uses a four-wheel indirect system. Compared to a full direct system, this hybrid approach reduces costs and overcomes the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as effectively as a full direct system.

8

0

Share

How many kilowatt-hours of electricity are required to fully charge a BMW i3?

It takes 33 kilowatt-hours of electricity to fully charge a BMW i3. Below is relevant information about the BMW i3: 1. Overview: The BMW i3 utilizes an advanced electric drive system, which is very similar to the all-electric drive system of the BMW 1 Series Active-E, with a maximum output power of 167 horsepower, delivering power to the rear wheels. The vehicle relies on a set of lithium-ion batteries to provide power, offering a maximum range of 257 kilometers and a top speed of 160 kilometers per hour when fully charged. The battery pack also supports fast charging mode, allowing the battery to reach 80% charge in just one hour. 2. Features: Inside the vehicle, the design of the new BMW i3 closely resembles that of the MINI Clubman, emphasizing practicality.

19

3

Share

How many points will be deducted for a motor vehicle failing to yield to a school bus as required?

Motor vehicles that fail to yield to a school bus as required will be deducted 6 points. Below is the relevant legal information: 1. Road traffic safety violations: According to the Road Traffic Safety Violation Scoring System (Item 14), driving a motor vehicle without yielding to a school bus as required will result in a deduction of 6 points. 2. School Bus Safety Management Regulations: Article 33 of the School Bus Safety Management Regulations stipulates that when a school bus stops on the road to pick up or drop off students, it must park on the right side of the road, activate the hazard warning lights, and display the stop sign. When a school bus stops on a road with only one lane in the same direction, vehicles behind must stop and wait, and are not allowed to overtake. When a school bus stops on a road with two or more lanes in the same direction, vehicles in the lane behind the school bus and in adjacent lanes must stop and wait, while vehicles in other lanes should slow down and pass. Vehicles waiting behind the school bus must not honk or use lights to urge the school bus. School buses have special status and absolute priority.

5

2

Share

What is the FORO car?

FORO is the Ford F-150, also known as the Raptor in China. It is a four-door, five-seat pickup truck produced by Ford Motor Company. Below are some details about the Ford F-150: 1. **Powertrain**: The Ford F-150 is equipped with a 3.5-liter V6 twin-turbocharged engine, available in two versions: low power and high power. The low-power version delivers a maximum horsepower of 380 HP, a maximum power output of 280 kW, and a maximum torque of 672 N·m. The high-power version offers a maximum horsepower of 422 HP, a maximum power output of 310 kW, and a maximum torque of 678 N·m. 2. **Dimensions**: The Ford F-150 is notably large, with dimensions measuring 5910*2192*1992 mm. 3. **Drivetrain**: The Ford F-150 comes standard with a four-wheel-drive system across all models.

13

4

Share

What is the reason for the EPC light on the Volkswagen Jetta and the inability to accelerate?

What Are the Structural Components of a Car?

Differences Between Hatchbacks and Sedans

How to Handle a Tire Pressure Warning?

How many kilowatt-hours of electricity are required to fully charge a BMW i3?

How many points will be deducted for a motor vehicle failing to yield to a school bus as required?

What is the FORO car?

Why is there no deduction when exiting the highway with ETC?

What is a car door hinge?

How to Use In-Car Air Conditioning and Pollen Filtration?

Can the clutch be released immediately after shifting gears?