What is the reason for the Envision's high engine RPM but no movement when stepping on the accelerator?

When to Turn on the Width Lights?

Width lights are used when it is not completely dark yet, and are turned on during evening driving to make the vehicle visible to others. Width lights are indicators installed on a vehicle to show its width. They are commonly used lights. When the width lights are on, the distance between the two beams is roughly the same as the width of the vehicle. If you are unsure whether your vehicle can pass through a narrow alley, you can turn on the width lights. Below is an introduction to other commonly used vehicle lights: 1. Headlights. These are installed on both sides of the front of the vehicle and are used for road illumination during nighttime driving. They come in two-lamp and four-lamp configurations. The illumination effect of headlights directly affects nighttime driving operations and traffic safety. 2. Turn signals. These are important indicators turned on when a vehicle is changing direction to alert surrounding vehicles and pedestrians. Turn signal lamps use xenon tubes and are controlled by a microcontroller circuit, working in an alternating left-right flash pattern without interruption.

11

2

Share

What are the differences between National 4 and National 5 vehicle standards?

National 4 and National 5 vehicles differ in the following aspects: 1. Different emission standards. Compared with National 4 emission standards, National 5 standards are stricter, resulting in fewer pollutants and thus being more environmentally friendly. 2. Different control systems. From the vehicle's perspective, National 5 has a more complex emission control system compared to National 4, with increased costs. Additional information about China's national vehicle pollutant emission standards is as follows: 1. The fifth stage of China's national vehicle pollutant emission standards, known as "National 5," has emission control levels equivalent to Euro 5. 2. National 4 emission standards represent the fourth stage of China's national vehicle pollutant emission standards, mainly including the application of catalytic converters, secondary air injection, and exhaust gas recirculation active layers.

14

1

Share

How to Avoid Crossing the Line When Exiting an S-Curve?

Methods to avoid crossing the line when exiting an S-curve: 1. Drive in 1st gear throughout the entire process and avoid steering too sharply. 2. Try to take a wider path after entering the curve. 3. While in the curve, use the side mirrors to align with the left and right lines, keeping the vehicle centered. Follow the diagonal line, aligning the car's corner with the line. Avoid crossing the line, but also don't stay too far from the edge line. 4. Adjust the steering direction promptly based on the curve's characteristics and the rear wheel's radius. Introduction to Subject 2: 1. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skill test. 2. For small vehicles (C1 and C2), the Subject 2 test includes reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving.

5

3

Share

What is the Difference Between Plug-in Hybrid and Hybrid?

The differences between plug-in hybrid and hybrid are as follows: 1. Charging Method: The power battery is charged by an external power source. Ordinary hybrid vehicles cannot use an external power source to charge the power battery. Plug-in hybrid vehicles belong to the category of new energy vehicles, while ordinary hybrid vehicles do not. 2. License Plate Registration: Can hybrid vehicles get green license plates? Hybrid vehicles can. 3. Different Nature: The main power source of a hybrid electric vehicle is the internal combustion engine. Hybrid vehicles primarily rely on the electric motor during the starting phase, and the engine only intervenes when a certain speed is reached. Compared to vehicles of the same size, the fuel cost is lower.

1

5

Share

Where is the emergency trunk release switch for the Buick Excelle?

In models with fixed and non-foldable rear seats, there is an emergency trunk release handle located beneath the central cover panel behind the rear seats. Here are some additional details: 1. Exterior: The slim headlights feature a new lamp cluster texture design, while the trapezoidal grille on the lower bumper exudes a sporty vibe with its mesh texture. The side profile remains unchanged, maintaining a bold and rugged style. 2. Configuration: Equipped with a 1.6L naturally aspirated engine, and a 1.6T turbocharged engine is also available, making it a stylish and sporty family sedan.

11

1

Share

How Many Times to Toggle for High-Low Beam Switching?

High-low beam switching requires toggling twice. Below is relevant information about high beams: 1. Concept: High beams refer to adjusting light intensity based on filament distance during nighttime driving. 2. Usage: As one of a vehicle's crucial functions, high beams project parallel light rays with concentrated brightness compared to low beams, illuminating higher and farther objects to significantly aid nighttime visibility. Undoubtedly, high beams enhance sight distance and expand the observation field. On unlit roads, the visible range with high beams far exceeds that with only low beams. Activating high beams is essential.

14

5

Share

What is the reason for the Envision's high engine RPM but no movement when stepping on the accelerator?

When to Turn on the Width Lights?

What are the differences between National 4 and National 5 vehicle standards?

How to Avoid Crossing the Line When Exiting an S-Curve?

What is the Difference Between Plug-in Hybrid and Hybrid?

Where is the emergency trunk release switch for the Buick Excelle?

How Many Times to Toggle for High-Low Beam Switching?

What does 104h on a car tire mean?

What does the AST button in the car mean?

What to Do When the Car's Exterior Glass Gets Blurry on Rainy Days?

What does the red exclamation mark on the car dashboard mean?