What is the reason for the engine still making noise after the Tiguan is turned off?

1 Answers
AlyssaLynn
07/30/25 4:35am
The reason for the engine still making noise after the Tiguan is turned off is that the spark plugs have lost their ignition capability or the throttle has malfunctioned. The owner needs to troubleshoot and repair them one by one. The Tiguan has a length, width, and height of 4506mm, 1809mm, and 1685mm respectively, with a wheelbase of 2684mm and a fuel tank capacity of 63 liters. This vehicle is equipped with a 1.8T turbocharged engine, with a maximum power of 118 kilowatts, a maximum power speed range of 4500 to 6200 revolutions per minute, a maximum torque of 250 Newton-meters, and a maximum torque speed range of 1500 to 4500 revolutions per minute. It is paired with a 6-speed automatic manual transmission.
Was this review help?
4
5
Share
More Forum Discussions

Is Glass Repair Fluid Effective?

Glass repair fluid has certain effects. When used to repair vehicle glass, the original cracks will be covered. The main purpose of glass repair fluid is to fill the gaps in the cracks after glass damage. Glass repair fluid is typically used for car windows. Overview of Car Windows: Windows (car-window) are an important component of the entire vehicle body, serving the purposes of interior lighting, ventilation, and driver visibility. Depending on the installation position of the glass, windows are categorized into front and rear windshields, side windows, and door windows. Structure of Car Windows: The window structure is usually a curved, enclosed type. Between the window frame of the vehicle body and the window glass, rubber sealing strips are used for connection. The sealing strips serve both sealing and cushioning functions to prevent damage to the windshield glass when the window frame deforms due to stress on the vehicle body.
13
4
Share

How to Use the Cruise Control on Audi A4L?

Audi A4L cruise control usage method: Pull the lever to the "ON" position to activate the cruise control system, press the button at the end of the lever to store the current speed, push the lever towards the "+" or "-" direction to increase or decrease the speed, and release the lever to store the current speed. The cruise system can be temporarily deactivated by pressing the brake pedal, pushing the lever towards the "CANCEL" direction, or exceeding the stored speed by more than 10 km/h for over 5 minutes; pushing the lever towards the "OFF" direction until it locks completely shuts down the cruise system. The function of Audi A4L cruise control is to allow the driver to maintain a constant speed without keeping the foot on the accelerator pedal.
19
4
Share

How to reset the tire pressure light on an Audi A3?

Audi A3 tire pressure light reset method: 1. First, start the car to see if the indicator light is still on. If it is, locate the operation switch for manual adjustment; 2. Enter the main menu, find the tire pressure monitoring system, and reset the tire pressure data. Save the settings once the data is successfully configured; 3. Exit the system, turn off the car, and restart it to find that the tire pressure indicator light has turned off. The Audi A3 is a sedan produced by Audi, featuring a well-designed chassis with a MacPherson front suspension and a rear axle with a torsion and crank structure featuring separately arranged springs and shock absorbers. In addition to excellent handling, the rear suspension layout also offers high space utilization.
13
0
Share

What Problems Can Be Caused by Aging of the Lower Control Arm Bushing?

After the lower control arm bushing is damaged or aged, abnormal tire wobbling may occur during driving, requiring timely inspection and repair. During the inspection, it is necessary to observe whether the clearance of the ball joint in the control arm has increased. Details are as follows: Definition of Automotive Maintenance: Automotive maintenance is a general term for vehicle upkeep and repair. It involves using technical means to diagnose faults in malfunctioning vehicles, identify the causes of the faults, and take certain measures to eliminate the faults and restore the vehicle to a certain level of performance and safety standards. Classification of Automotive Maintenance: Automotive maintenance includes major repairs and minor repairs. Major repairs refer to restorative repairs that involve repairing or replacing any vehicle components (including foundational parts) to restore the vehicle's technical condition to a sound state and fully (or nearly fully) recover its service life. Minor repairs refer to operational repairs that involve replacing or repairing individual parts to ensure or restore the vehicle's operational capability.
17
4
Share

Where is the Ballast Installed?

The ballast is installed beneath the bumper and headlight assembly. When the vehicle is moving forward, the incoming airflow through the grille helps cool the ballast, thereby reducing the risk of spontaneous combustion. Additionally, the ballast should not be installed too far away to prevent interference from other electrical devices that might affect its normal operation. The ballast is an essential component in HID lighting systems, also known as an electronic ballast. Its function is to instantly boost the vehicle's 12V voltage to 23,000V, using this high voltage to activate the xenon bulb, creating intense light between the electrodes and enabling the bulb to achieve high-brightness illumination.
19
2
Share

Where to Look for White Light and Yellow Light in Xenon Lamps?

Distinguish between white light and yellow light xenon lamps by checking the color temperature value on the packaging. The color temperature value for golden light is 3000K, for yellow-white light is 4300K, and for ultra-white light is 6000K. Advantages of modifying xenon headlights: After modification, the vehicle's lighting effect will be improved. Xenon lamps also have a longer lifespan than halogen lamps, with comfortable color temperature that can effectively reduce driver's visual fatigue, directly and significantly enhancing driving safety. Precautions for modifying xenon lamps: Do not install the ballast next to a heat source; it can be mounted on the bumper to assist with heat dissipation. During installation, ensure the wiring of the dedicated wire set is as aesthetically pleasing as possible and avoid connecting it to heat sources to prevent short circuits or wire breakage due to excessive temperature.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.