What is the reason for the electric mirror not returning to position?

What does wheel hub center hole spacing mean?

Wheel hub hole spacing, professionally known as Pitch Circle Diameter (PCD), refers to the diameter between the central fixing bolts of the wheel hub. Most wheel hubs typically have either 5 or 4 bolt holes. Below is an introduction to wheel structure:1. Rim: The part of the wheel that fits with the tire and supports it.2. Spoke: The part of the wheel that connects to the axle hub and supports the rim.3. Offset: The distance between the center plane of the rim and the mounting surface of the spoke. It can be positive offset, zero offset, or negative offset.4. Flange: The part of the rim that maintains and supports the direction of the tire.5. Bead seat: Also known as the mounting surface, it contacts the tire bead and supports the radial direction of the tire.6. Well base: A depression on the rim with certain depth and width to facilitate tire installation and removal.7. Valve hole: The hole for installing the tire valve.

6

5

Share

What car brand does the WEY logo represent?

"WEY", also known as "Wei Pai", is a luxury SUV brand under Great Wall Motors. Below is a detailed introduction to WEY vehicles: 1. Its model lineup includes the VV5, VV7, P8, and the intelligent luxury SUV VV6. 2. The VV7 is the first model under the WEY brand. It is equipped with a 2.0T direct-injection turbocharged engine, a 7DCT dual-clutch transmission, and a fully independent sport-comfort suspension. The top speed reaches 205 km/h, with a rated power of 172 kW and a maximum torque of 360 N·m at 2200-4000 rpm. The 7-speed transmission features a quick-response shift hydraulic system, efficient clutch cooling capability, a multi-layer filter design for high oil cleanliness, and the application of low-viscosity oil for fuel economy, effectively reducing fuel consumption. 3. The VV5 measures 4462*1857*1638 mm (L*W*H) with a wheelbase of 2680 mm. The model is powered by a 2.0T high-torque direct-injection turbocharged engine and a 7DCT next-generation 7-speed wet multi-plate dual-clutch transmission.

17

3

Share

What to do when ABS intervention fails to stop the car?

Here are the solutions for when the ABS intervention fails to stop the car: 1. Slam on the brakes. The ABS should prevent wheel skidding, and you may feel the brake pedal vibrate and hear a clicking sound—this is normal. Do not pump the brakes (this will deactivate the ABS). Keep your foot firmly on the brake pedal and maintain steering to ensure the four-wheel ABS works properly. 2. In light trucks equipped with rear-wheel anti-lock brakes, the front wheels can still lock up like traditional brakes. If the front wheels lock, release the brake pedal with enough pressure to allow the front wheels to roll again for steering. The anti-lock braking system includes a warning light to alert the driver when a system fault is detected. 3. If the indicator light comes on while driving, the ABS system will be disabled, and the system will revert to standard non-ABS braking operation. Although you can still drive the car using standard brakes, it should be repaired as soon as possible.

6

1

Share

Which Lights to Use When Overtaking?

When overtaking, pass the vehicle in front from the left side, so first turn on the left turn signal. After accelerating to overtake, when returning to the driving lane, treat it as a lane change and turn on the right turn signal. When changing lanes, the driver must signal in advance, pay attention to vehicles coming from behind, and also note that consecutive lane changes are not allowed. Below are the relevant regulations regarding overtaking: 1. Before overtaking, turn on the left turn signal, honk the horn (except in areas or sections where honking is prohibited, use flashing high and low beams at night), and after ensuring safety, overtake from the left side of the vehicle being passed. After maintaining a necessary safe distance from the overtaken vehicle, turn on the right turn signal and return to the original lane. 2. Do not overtake when the vehicle being passed signals a left turn or U-turn. 3. Do not overtake if there is a possibility of encountering oncoming traffic during the overtaking process. 4. Do not overtake a vehicle that is already in the process of overtaking. 5. Do not overtake when passing through intersections, crosswalks, flooded roads, flooded bridges, or when encountering situations specified in Article 36 of the "Road Traffic Management Regulations."

14

5

Share

Does idling the car after ignition consume fuel?

Leaving the car idling after ignition does consume fuel. Here are the issues that may arise from idling the car after ignition: 1. When the car is idling, it means the engine is running at idle speed, which refers to the engine running without load. The idle speed of an engine typically ranges between 550-800 RPM. Prolonged idling can easily lead to carbon buildup in the engine. Both high and low idle speeds are undesirable. A high idle speed can affect fuel consumption, potentially increasing it, raising the engine's internal temperature, and accelerating engine wear, thereby reducing the engine's lifespan. Conversely, prolonged low idle speed can cause the car to stall. Stalling can occur in two scenarios: stalling while idling or stalling while the car is in motion. 2. In colder temperatures, idling the engine to warm it up is a method that can be used, but the idling time should not be too long. Idling for about a minute is sufficient. Once the RPM stabilizes, you can warm up the car by driving at low speeds while keeping the RPM under 2000. This method not only saves fuel but also helps prevent carbon buildup in the engine.

3

2

Share

What are the reasons for the sudden increase in fuel consumption of the Tiguan L?

The increase in fuel consumption of the Tiguan L may be due to the following reasons: 1. Insufficient tire pressure and tire wear. Low or insufficient tire pressure increases friction between the tires and the ground, leading to greater resistance and higher fuel consumption. Severe tire wear can cause frequent slipping, which also increases fuel consumption. 2. Pay attention to fuel quality and regularly clean carbon deposits. Poor-quality gasoline can lead to more carbon deposits, which roughen the intake pipe walls, affecting air intake and the quality of the air-fuel mixture, causing a sharp rise in fuel consumption. Therefore, fuel quality should not be overlooked, and it is essential to clean carbon deposits every six months. 3. Regularly check the oxygen sensor. This is a ceramic component located on the engine's exhaust pipe, used to detect and control the oxygen-to-fuel ratio. Over time, the electronic fuel injection system's computer may not receive accurate oxygen concentration information from the exhaust pipe, often resulting in a higher concentration of the air-fuel mixture in the engine and increased fuel consumption. Therefore, it is necessary to regularly check the condition of the oxygen sensor, which typically needs replacement after 80,000 to 110,000 kilometers. 4. Driving habits. Everyone's driving habits vary, and poor driving habits can also lead to higher fuel consumption. 5. Driving conditions. Congested driving conditions can also increase fuel consumption because the engine works harder when the vehicle moves from a standstill, leading to higher fuel injection. Additionally, short trips can result in higher fuel consumption as the engine and vehicle may not reach their optimal operating temperature before shutting off. 6. Regularly replace spark plugs. Spark plugs generate high-voltage sparks to ignite the air-fuel mixture. If damaged, they reduce ignition energy, causing uneven combustion of the mixture, slower acceleration, and increased fuel consumption. Standard spark plugs last only 30,000 to 50,000 kilometers, platinum spark plugs last about 50,000 to 80,000 kilometers, and iridium spark plugs can last up to 100,000 kilometers. 7. Vehicle weight. Carrying excessive weight in the vehicle can increase fuel consumption by about 2% compared to normal driving. While this may seem insignificant, it adds up over time. Therefore, modern vehicles are designed with high-strength, lightweight bodies to improve fuel efficiency.

2

0

Share

What is the reason for the electric mirror not returning to position?

What does wheel hub center hole spacing mean?

What car brand does the WEY logo represent?

What to do when ABS intervention fails to stop the car?

Which Lights to Use When Overtaking?

Does idling the car after ignition consume fuel?

What are the reasons for the sudden increase in fuel consumption of the Tiguan L?

Will long-term non-use of highways affect ETC functionality?

How often should the ZF 8AT transmission fluid be changed?

What is the function of the two protrusions on the hood?

How to Set Up One-Touch Window Lift for Haval Big Dog?