What is the reason for the difference in fuel consumption between national highways and expressways?

1 Answers
KaiRose
07/29/25 6:59pm
The reason for the difference in fuel consumption between national highways and expressways is that the speed at which a car travels on a national highway differs from that on an expressway, leading to variations in fuel consumption rates. Overview of vehicle speed: Vehicle speed refers to the distance a car travels per unit of time, commonly referred to as speed, with units typically expressed in kilometers per hour or meters per second. Vehicle speed is one of the three parameters used to describe traffic flow and holds significant importance in traffic flow theory research. Classification of vehicle speed: Vehicle speed can also broadly refer to motor vehicle speed. To accommodate different purposes, vehicle speed is mainly categorized into spot speed, segment speed, and design speed. Spot speed is the instantaneous speed of a vehicle passing a specific point on the road. Design speed is the speed established to determine the design indicators of various geometric elements of the road and to ensure their coordination.
Was this review help?
18
1
Share
More Forum Discussions

Will speed limits of 20 km/h be monitored for speeding?

Speed limits of 30 km/h are generally not monitored, but there may be exceptions. According to relevant regulations, mobile speed monitoring devices are generally not allowed to be set up on road sections with speed limits below 50 km/h (excluding 50 km/h). If special circumstances require their installation, approval from the Municipal Public Security Bureau's Traffic Police Division is necessary. Below is relevant information about speeding: 1. Introduction: Speeding refers to the act of driving a vehicle at a speed exceeding the legal limit. For example, the maximum speed limit on China's highways is 120 km/h. 2. Penalties for speeding: If the speed exceeds the limit by less than 10%, a warning will be issued. On roads with speed limits below 50 km/h, if the speed exceeds the limit by 10% to 20%, a fine will be imposed.
13
0
Share

What to Do When a Car Tire Gets a Nail Puncture?

Handling a nail puncture in a car tire depends on the specific situation: 1. If the nail is stuck in the tire tread, simply remove it; 2. If the nail has penetrated the tire but not gone all the way through and there is no air leakage, use pliers to pull it out; 3. If the nail has penetrated the tire tread completely, continuing to drive will worsen the damage, and you should replace it with a spare tire immediately; 4. If the nail has punctured the sidewall of the tire, slow down and drive to the nearest location to purchase and replace a new tire. The functions of a tire are: 1. To directly contact the road surface and work with the car's suspension to absorb shocks during driving; 2. To ensure good ride comfort and smooth driving; 3. To provide good traction between the wheels and the road surface.
18
5
Share

How to Solve Dual-Clutch Shudder During Start-Up?

Dual-clutch shudder during start-up can be resolved by: 1. Cleaning the fuel system and checking if the idle control valve has carbon deposits that need cleaning; 2. Inspecting the spark plugs for excessive carbon buildup and replacing them if necessary; 3. Checking the fuel pressure and replacing components if needed; 4. Replacing engine mounts or other worn-out parts. The causes of dual-clutch shudder during start-up include: 1. Insufficient engine power; 2. Loose connections between the transmission and chassis; 3. Uneven engagement of the clutch pressure plate and friction disc; 4. Dirty throttle body; 5. Unstable fuel system; 6. Damaged high-tension leads or faulty spark plugs. The clutch, located between the engine and transmission, acts as a switch for power transfer between them, capable of both transmitting and cutting off power as a transmission component.
6
0
Share

What happens if the traffic police impound a vehicle and do not handle it for a long time?

It will be auctioned or forcibly scrapped. Below is relevant information: Traffic Police: Traffic police, abbreviated as "JJ," refer to the people's police within public security organs responsible for managing traffic order and investigating traffic accidents. They are a branch of the people's police, with main duties including traffic order management, traffic accident investigation, traffic crime detection, and vehicle and driver management. Regulations: Vehicles impounded by traffic management departments of public security organs shall not be used except for inspection and appraisal. Within five days after the completion of inspection and appraisal, the parties involved shall be notified to collect the accident vehicle and the motor vehicle driving license. For ownerless vehicles abandoned by fleeing drivers or those not collected by the parties involved within ten days after notification, they will be handled according to Article 112 of the "Road Traffic Safety Law of the People's Republic of China."
2
3
Share

Difference Between 4S Stores and Dealers in the Automotive Industry?

Difference Between 4S Stores and Dealers in the Automotive Industry? The differences between automotive 4S stores and dealers lie in the variety of brands sold, pricing, and after-sales services. Here are the relevant details: 1. Difference in the complexity of brands sold: Automotive dealers sell a wider range of car brands, while 4S stores exclusively sell vehicles from a single brand. 2. Price difference: The car prices at dealers are generally more cost-effective compared to those at 4S stores. 3. After-sales service difference: Dealers only sell cars and do not provide after-sales maintenance services, whereas 4S stores not only sell cars but also offer after-sales maintenance services to customers. Many car enthusiasts prefer purchasing vehicles from dealers to save costs, as dealers' car prices are more economical, making them a popular choice among consumers.
15
5
Share

What are the reasons for the Chevrolet Cruze shock absorber making noise under pressure?

The reasons for the Chevrolet Cruze shock absorber making noise under pressure are: 1. Damage to the shock absorber plane bearing; 2. Loose lower control arm ball joint; 3. Excessive clearance in the balance rubber bushing. The Chevrolet Cruze is a compact 5-door, 5-seat hatchback with body dimensions of: length 4450mm, width 1807mm, height 1459mm, wheelbase 2700mm, and fuel tank capacity of 52 liters. The Chevrolet Cruze is equipped with a 1.5L naturally aspirated engine and a 6-speed automatic transmission, with a maximum power of 84 kilowatts and a maximum torque of 146 Newton meters. It features front-wheel drive, with a front suspension using MacPherson strut independent suspension and a rear suspension using a torsion beam non-independent suspension.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.