What is the reason for the constant water shortage in the Wuling Rongguang radiator?

How to turn off the WM Motor vehicle?

Press the brake pedal to ensure the vehicle is stationary, then shift the gear into N (Neutral) position. Engage the parking brake. Shift into P (Park) position, then release the brake pedal. Turn off any unnecessary electrical equipment in the vehicle. Check if the gear is already in P (Park) position, verify that all unnecessary electrical devices are turned off, and ensure the steering wheel is straightened. Turn the key counterclockwise to the end, or press the one-touch start/stop button once, then adjust the ignition switch position to OFF.

20

3

Share

What to Do If Rust Remover Is Sprayed on Brake Pads?

If it hasn't been long, you can wash them with alkaline water, dry them, and then test drive to see if they can still be used. If the brake pads are thin, they should be replaced. The surface must achieve the corresponding friction coefficient. If you don't want to bother, you can leave it as is. After some time of use, the brake will wear it off naturally.

3

0

Share

What is Tire Pressure?

Tire pressure, strictly speaking, refers to the air pressure inside a tire. Introduction to Tire Pressure: Tire pressure is an indicator of a vehicle's load capacity. The load capacity of a vehicle depends on the level of tire pressure. According to the relationship between a tire's load index, tire pressure, and load capacity, the higher the tire pressure, the greater the load capacity; the lower the pressure, the smaller the load capacity. For example, a tire with a load index of 80 has a load capacity of 300 kg at a pressure of 0.15 MPa, while at 0.25 MPa, the load capacity increases to 450 kg. This demonstrates the significant impact of tire pressure on a vehicle's load capacity. Hazards of Abnormal Tire Pressure: Pressure is the lifeblood of a tire; both excessively high and low pressures can shorten its lifespan. If the pressure is too low, the tire body deformation increases, cracks are more likely to appear on the sidewalls, and flexing movements occur, leading to excessive heat generation, which accelerates rubber aging, fatigue of the cord layers, and breakage of the cords. Low pressure also increases the tire's contact area with the ground, accelerating wear on the tire shoulders. If the pressure is too high, the tire cords undergo excessive stretching and deformation, reducing the tire body's elasticity. This increases the load on the vehicle during driving, and impacts can cause internal cracks or even blowouts. Additionally, excessive pressure accelerates wear on the tire tread and reduces its resistance to punctures.

17

0

Share

How to Determine the Repair Plan for an Accident Vehicle?

Only the losses from the current insurance accident should be considered, distinguishing between the losses from the current accident and those from non-current accidents, as well as normal maintenance losses versus insurance accident losses. If the damage neither affects the performance nor the appearance quality and can be restored with simple processes, repair should be prioritized. If the damage is mainly bending deformation (elastic deformation), it should be repaired; if the damage is mainly folding deformation (plastic deformation), it should be replaced.

2

3

Share

How to Determine if a Tire Pressure Warning is a False Alarm?

Check the tire pressure data for each wheel, carefully identifying any leaks or problematic tires (slow leaks from small nails puncturing the tire are common). Repair or replace the problematic tire (if a single wheel patch exceeds 5 grams, a dynamic balance is required). Reinflate all four tires to 2.5Bar, then recalibrate via the central control screen. The New 8 series (both old and new models) comes standard with indirect tire pressure monitoring.

3

Share

How to Determine if the Tie Rod is Damaged?

Most vehicle steering wheels have the function of automatically returning to center. Cars equipped with hydraulic power steering systems experience this due to the damping effect of the hydraulic system. When driving on a crowned road surface, the vehicle naturally tends to drift to one side. If the crown is significant, the drift becomes more noticeable and can be influenced by external factors. If you notice that steering feels lighter in one direction and heavier in the other, you should immediately take the vehicle to a 4S shop for inspection and repair.

8

1

Share

What is the reason for the constant water shortage in the Wuling Rongguang radiator?

How to turn off the WM Motor vehicle?

What to Do If Rust Remover Is Sprayed on Brake Pads?

What is Tire Pressure?

How to Determine the Repair Plan for an Accident Vehicle?

How to Determine if a Tire Pressure Warning is a False Alarm?

How to Determine if the Tie Rod is Damaged?

How to Clear the Maintenance Reminder on FAW JH6?

How to Install the Jiangling Transit Engine Belt?

Where is the Brake Line Located?

Will Breaking a Car Window Trigger the Alarm?