What is the reason for the constant illumination of the yellow engine light in the LaCrosse 2.4?

1 Answers
Alex
07/30/25 9:02am
LaCrosse 2.4 engine yellow light constantly illuminated indicates that there is a fault in the engine. This fault does not affect the normal operation of the engine, but it requires timely inspection and repair. The core part of a car is the engine, and the health status of the engine directly affects the driving safety of the entire vehicle. Once the engine malfunctions, the engine fault light on the vehicle's dashboard will remain lit. The LaCrosse is a new mid-to-high-end sedan launched by SAIC-GM, with body dimensions of 4902mm in length, 1863mm in width, and 1461mm in height, and a wheelbase of 2829mm. The LaCrosse is equipped with GM's 1.5T SIDI direct-injection turbocharged engine and a 9-speed HYDRAMATIC intelligent transmission, providing consumers with a richer selection of mid-to-high-end vehicles.
Was this review help?
15
2
Share
More Forum Discussions

How to Adjust Car Audio for Optimal Sound Quality?

For most listeners, the treble settings of car audio systems should generally remain unchanged or be increased by 1-2 notches. Exceeding 2 notches may result in harsh and uncomfortable sound. The midrange, being the backbone of music, can be moderately boosted or attenuated by 2-3 notches. Attenuating beyond 3 notches may lead to a thin midrange, while boosting beyond 3 notches can cause sound distortion. The bass, being powerful and dynamic, can be adjusted according to personal preference. Car Audio Tuning Techniques: Method 1: Crush the high frequencies to create a clear, spacious, and pressure-free high-frequency effect. By attenuating the lower frequencies to a certain extent, the delicacy and spatial sense of the high-frequency range can be highlighted due to the masking effect. Method 2: Tighten the ultra-low frequencies to create a crisp and clean ultra-low frequency effect. First, tighten the sound to avoid muddiness. After significantly attenuating the residual bass, the sound will become clean and refreshing. Method 3: Thicken the mid-low frequencies to create a fast and full mid-low frequency effect. Cut off frequencies below 60 Hz to enhance the response speed of the lower range, and boost the 160 Hz range to make the sound more solid and full.
11
5
Share

What is the correct method for turning the steering wheel one and a half turns?

When you need to turn the steering wheel one and a half turns, first hold the steering wheel at the 45-degree position on the top left with your left hand, release your right hand, and turn the wheel clockwise to the 45-degree position on the bottom right with your left hand. During this process, there should be no hand crossing. You can first turn the wheel one full turn, then another half turn, which helps avoid confusion. Methods for turning the steering wheel half a turn or one full turn: 1. Half a turn: Hold the steering wheel at the 45-degree position on the top left with your left hand, then turn it clockwise to the 45-degree position on the bottom right. 2. One full turn: Next, grab the steering wheel at the 45-degree position on the top left with your right hand, release your left hand, and turn the wheel clockwise to the 45-degree position on the bottom right with your right hand. 3. Tips: To determine whether you've turned the steering wheel half a turn or one full turn, you can refer to the brand logo and horn symbol on the steering wheel. After one full turn, the brand logo and horn will return to their original positions. For half a turn, the brand logo and horn will appear upside down. If you forget how many turns you've made during the process, you can turn the wheel all the way in one direction, then return it to the center and start over.
3
3
Share

Does wheel hub painting damage the wheel hub?

Tire painting generally does not harm the tire and can even protect it. The advantages of tire painting are as follows: 1. Good heat dissipation: For most vehicle models, the appearance of the tire is less considered, and good heat dissipation is a basic requirement; 2. Good maintenance: This process mainly involves paint treatment, which means spraying paint first and then using electric baking treatment. It is cost-effective, aesthetically pleasing, and has a long preservation time. If well maintained, even if the vehicle is scrapped, the color of the tire will remain unchanged; 3. Attractive process: Many tire surface treatment processes involve painting. Some fashionable, avant-garde, and dynamic-colored wheels also use the painting process.
8
4
Share

Where is the fault if the motorcycle is not charging?

There are several reasons why a motorcycle cannot charge: 1. Rectifier failure: The rectifier is responsible for converting AC power into DC power to supply the entire vehicle. If the rectifier is damaged, it can be replaced. 2. Generator failure: If the generator coil is broken, the internal circuit cannot form a circulating electromotive force, and the power cannot be transmitted out. This is also a part that cannot be repaired and must be replaced. 3. Wiring fault: The generator has two AC output wires. If these wires are broken, they will not be able to output power, and they can be reconnected to fix the issue.
5
2
Share

Can a 12-point demerit record on a driver's license be cleared?

A driver's license that has been deducted 12 points must be processed at the traffic management department of the public security authority at the place where the license was issued or where the violation occurred. This involves handling the violation, paying the fine, participating in theoretical study, and taking the subject one exam. Upon passing the exam, the points will be cleared. Below is more related information: Driver's license point system: 1. The point system on a driver's license is a penalty for traffic violations committed by the driver. Depending on the severity of the violation, points can range from a minimum of 1 to a maximum of 12 per violation. The point cycle is one inspection period. If a driver accumulates 12 points in one cycle, they lose their driving qualification. Typically, they must undergo no less than 7 days of traffic safety education and pass an exam before their driving qualification can be restored. The point system serves to enforce compliance with traffic safety laws, thereby reducing the incidence of traffic accidents. However, in practice, the penalty of point deduction often lacks seriousness and standardization, making the point system merely a formality. 2. The point cycle starts from the date the driver's license was obtained. For example, if the license was obtained on November 4th, then November 4th marks the start of a point cycle, which ends on November 3rd of the following year. If the points accumulated within one cycle do not reach 12 and all fines are paid before the cycle ends, the system will automatically reset the points to zero at the start of the next cycle. If there are unpaid fines, the points will not be reset at the start of the next cycle, and new points will be added on top of the existing ones. This process continues, and if the points exceed 12, the driver must undergo study to clear them.
3
5
Share

What are the symptoms of a damaged car cooling fan resistor?

The blower resistor mainly controls the speed of the blower. If the blower resistor is damaged, the blower will operate at the same speed across all gear settings. Once the blower resistor fails, the air volume control knob loses its speed adjustment function. Here are the specific details about car air conditioning: 1. Introduction: The car air conditioning system, abbreviated as car AC, is used to regulate and control the temperature, humidity, air cleanliness, and airflow inside the car cabin to optimal conditions. It provides a comfortable riding environment for passengers, reduces travel fatigue, and creates favorable working conditions for the driver, playing a crucial role in ensuring safe driving. 2. AC Layout: Different types of AC systems have varying layouts. Currently, integrated heating and cooling AC systems are widely used in passenger cars. The layout involves assembling components such as the evaporator, heater radiator, centrifugal blower, and control mechanism together, referred to as the AC unit assembly.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.