What is the reason for the constant flashing of the Peugeot 307 clock?

1 Answers
NathanFitz
07/29/25 6:13pm
The main reasons for the constant flashing of the Peugeot 307 clock include a dead car battery and poor wiring harness contact. When the Peugeot 307 clock keeps flashing, check the car battery's charge level, recharge it promptly, or reinstall and secure the power cable. Here is some information about the Peugeot 307: 1. About the Peugeot 307: The Peugeot 307 is a compact sedan produced by Dongfeng Peugeot. 2. In terms of power: It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 117 hp, a maximum power of 86 kW, and a maximum torque of 150 N·m. 3. In terms of fuel consumption: According to the MIIT comprehensive fuel consumption data, the Peugeot 307 has a combined fuel consumption of 7.3L/100km. However, based on some actual test data, its fuel consumption is generally around 8L/100km. 4. In terms of transmission: The Peugeot 307 offers a 5-speed manual or a 4-speed automatic transmission. 5. In terms of suspension: The Peugeot 307 features a MacPherson strut front suspension and a deformable crossbeam rear suspension with a stabilizer bar.
Was this review help?
2
0
Share
More Forum Discussions

Will the transferred car still be displayed on 12123?

Will the transferred car still be displayed on 12123? Here is some information about vehicle transfer: 1. Introduction: Vehicle transfer refers to changing the name of the vehicle owner. When buying a used car, besides checking the condition of the car, the most important step is completing the transfer procedures. 2. Principle: Every car has a fixed registration, which mainly records the owner and address of the car, as well as some related car parameters. When there are issues with the car, such as involvement in an accident, failure to participate in annual inspection, theft, or smuggling, the car cannot be transferred through normal procedures.
10
4
Share

What is the function of the vehicle KDSS system?

The function of the vehicle KDSS system is to prevent further vehicle roll. Here are the detailed contents about the vehicle KDSS: 1. Definition: The KDSS system is a front and rear stabilizer that uses a bidirectional hydraulic pipeline and a cross-connected front and rear hydraulic cylinder system. When a normal driving vehicle experiences roll, the KDSS system can effectively prevent the fluid circulation in the front and rear stabilizers. 2. Precautions: The vehicle KDSS system can adjust according to different road conditions. In off-road mode, since the stabilizer bar does not twist, the suspension travel is increased compared to a normal suspension, allowing the KDSS system to adjust based on different road conditions.
13
4
Share

What to Do If the Exhaust Temperature of China VI Vehicles Is Too High?

China VI vehicles may experience high exhaust temperature due to the following reasons and solutions: 1. Excessive concentration of combustible mixture in the cylinder: Check if there is any malfunction in the oxygen sensor and fuel injection system. If the oxygen sensor fails, the vehicle cannot automatically control the fuel injection amount; 2. Abnormal cylinder pressure and ignition timing: Use a decoder to read the data stream from the knock sensor, then adjust the fuel injection amount and ignition timing based on the data stream information; 3. Normal phenomenon: Generally, the exhaust temperature at idle is around 30-50 degrees Celsius, while at high speeds, it ranges between 60-70 degrees Celsius.
19
1
Share

How Far Can a Vehicle Be Driven After Its Maintenance Period?

Vehicle can still be driven for 3,000 to 5,000 kilometers after reaching its maintenance period. Regular maintenance is crucial for automobiles, and it is essential to use genuine parts and fluids during servicing. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain components of the vehicle. It primarily includes maintenance of the engine system, transmission system, air conditioning system, etc., aiming to keep the car clean, ensure normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
20
4
Share

What is a compact car?

Compact cars generally refer to models with engine displacements around 1.0-1.3 liters. However, the distinction between micro cars and compact cars, including other similar vehicle categories, has become increasingly blurred. Typically, classification is determined by the manufacturer's positioning and the vehicle's predecessor. Below is more information about compact cars: 1. Definition: Compact cars generally refer to A0-segment vehicles within the A-class category. These vehicles usually have a wheelbase between 2.2 to 2.3 meters (some models fall outside this range) and engine displacements from 1 to 1.3 liters. 2. Common compact car models: Some commonly seen compact cars include the Xiali, Swift, and MG 3SW.
7
2
Share

What are the differences between National IV and National V emission standards?

The differences between National IV and National V emission standards are: 1. Different release dates: National IV was released on December 30, 2005; National V was released on September 17, 2013. 2. Different stringency levels: Compared with National IV, the National V standard reduces nitrogen oxide (NOx) emissions by 25% for light-duty vehicles and 43% for heavy-duty vehicles. Vehicle emission standards regulate the permissible levels of harmful gases emitted from vehicle exhaust, including CO (carbon monoxide), HC (hydrocarbons), NOx (nitrogen oxides), and PM (particulate matter).
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.