What is the reason for the clicking sound when the Qashqai turns?

1 Answers
BeauDella
07/30/25 9:35am
Qashqai makes a clicking sound when turning due to the CV joint (Constant Velocity joint), which is part of the drivetrain system. The half-shafts of the car's wheels are equipped with CV joints. The half-shaft is responsible for transmitting power to the wheels. The reason for the abnormal noise from the CV joint is increased play, which is caused by abnormal wear. The abnormal wear is due to poor lubrication. There are many reasons for poor lubrication of the CV joint, but the most common reason is leakage from the CV joint's rubber boot. CV joints generally have rubber boots, and if the boot leaks, it will cause the lubricant inside the CV joint to leak out, leading to poor lubrication of the CV joint.
Was this review help?
13
0
Share
More Forum Discussions

What brand is the transmission of the Changan CS35?

The manufacturer of the Changan CS35 transmission is Aisin. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the highest market share globally. The Changan CS35 is equipped with a 5-speed manual transmission and a 4-speed automatic manual transmission. The automatic manual transmission has eight forward gears. Essentially, an automatic manual transmission is a traditional AT or CVT transmission with the added functionality of manual shifting. When using the Changan CS35's transmission in daily driving, it is important to pay attention to the following points: Do not delay changing the transmission oil for an extended period. Prolonged failure to change the transmission oil can lead to damage to internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause the transmission to overheat and produce a noticeable jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers, aiming for smooth operation, may shift into reverse while the vehicle is still moving, which can significantly damage the transmission gears and, over time, lead to gear grinding and other faults. Avoid frequently climbing steep slopes in Drive (D). Automatic transmission vehicles can overheat due to high loads or may shift up too early, resulting in insufficient power for climbing. In such cases, using manual mode to limit the gear to a lower speed or switching to sport mode can help protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in Neutral (N). Using a tow rope or directly towing the vehicle is not recommended.
20
5
Share

How to Solve the Problem of Anti-Theft Authentication Failure Preventing Ignition?

If the anti-theft authentication fails and prevents ignition, you can try replacing the remote control battery. It could also be due to a malfunction in the one-touch start function, or there might be an issue with the body control module or the circuit. It is recommended to contact a repair shop for inspection and repair. Once the fault is fixed, the car can be used normally. Here is more information about anti-theft authentication: 1. Ignition System: The ignition system of a car is designed to ensure the proper operation of a spark-ignition engine. It provides the spark plugs with sufficient high voltage in the correct firing order for each cylinder, generating a strong enough spark to ignite the combustible gas mixture. The electronic ignition system uses an electronic control unit to manage ignition based on the car's operating conditions, ensuring the engine remains in an optimal state. 2. Anti-Theft Authentication: Anti-theft authentication failure typically manifests as brake failure, a stiff steering wheel, or the inability to start the engine. This happens because the engine anti-theft system activates, cutting off fuel and power, preventing ignition. Without oil pressure, both the brakes and power steering cease to function. There are generally two main reasons for engine anti-theft authentication failure: First, it could be due to a mismatch between the remote key and the engine control unit. Specific causes include electromagnetic interference nearby, large power equipment in the vicinity, or being in an extremely open area. Second, water seepage from the front windshield film (a common issue) can cause water to flow into the central control unit.
6
5
Share

What is the real fuel consumption of the Sonata 9 Hybrid?

The hybrid version has a fuel consumption of 5.9 liters per 100 kilometers. The Sonata 9 Hybrid is equipped with a 2.0-liter naturally aspirated engine. Additional information: The tenth-generation model comes with two engine options, one is a 1.5-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine. 1. 1.5-liter turbocharged engine: It has a maximum power of 125 kW and a maximum torque of 253 Nm, with the maximum power achieved at 5500 rpm and the maximum torque available from 1500 to 4000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 2. 2.0-liter turbocharged engine: The 2.0-liter turbocharged engine delivers a maximum power of 176.5 kW and a maximum torque of 353 Nm, with the maximum power achieved at 6000 rpm and the maximum torque available from 1500 to 4000 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
10
5
Share

Where to Cancel ETC?

ETC cancellation can be done through the "ETC Service Mini Program" in WeChat; contact the issuer for cancellation, with the customer service number on the card; if the issuer doesn't resolve the issue, you can call 95022. Here is some information about ETC: 1. Introduction to ETC: ETC, which translates to Electronic Toll Collection in Chinese, is an automatic toll collection system for highways or bridges. 2. How ETC Works: It uses dedicated short-range communication between the vehicle's electronic tag installed on the windshield and the microwave antenna in the ETC lane at toll stations. This is combined with computer networking technology for backend settlement processing with banks, allowing vehicles to pay highway or bridge tolls without stopping at toll stations.
7
2
Share

What to do if a parking ticket is issued to the car?

After receiving a parking ticket, the vehicle owner should accept the penalty as required, which typically involves a fine of 200 yuan without deducting points. Below is relevant information about traffic violation handling: 1. On-site illegal parking penalty: For violating the parking regulations of motor vehicles under the Road Traffic Safety Law, if the driver is present, the traffic police can point out the violation and issue a verbal warning, instructing the driver to leave immediately. Generally, the driver only needs to leave quickly without facing a fine. If the driver refuses to leave and the parked vehicle obstructs other vehicles or pedestrians, the traffic police will impose a fine ranging from 20 to 200 yuan. 2. Off-site illegal parking penalty: If the driver is not present, in addition to issuing a fine and a ticket, if the parked vehicle obstructs other vehicles or pedestrians, the traffic police department has the authority to tow the vehicle to a location that does not obstruct traffic or to a designated parking area by the traffic management department of the public security organ.
12
1
Share

Can You Still Drive with a Cracked Run-Flat Tire?

You can still drive with a cracked run-flat tire, as it is designed to allow the vehicle to continue driving at low speeds even in the event of tire deflation, air leakage, or a blowout. Below is an introduction to related content: 1. The role of tires: Tires are important components of a car, directly in contact with the road surface. Together with the car's suspension, they help to mitigate the impact experienced during driving, ensuring good ride comfort and smoothness, maintaining good adhesion between the wheels and the road surface, improving the car's traction, braking, and off-road capability, and bearing the weight of the car. 2. Tire maintenance methods include: (1) Regularly clean out stones stuck in the tire treads. (2) Minimize exposure of tires to direct sunlight. (3) Frequently check the tire pressure.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.