What is the reason for the clicking noise in the steering of Haval H6?
3 Answers
The reasons for the clicking noise in the steering of Haval H6: Aging of the steering tie rod ball joint: This requires replacing the steering tie rod ball joint, and a four-wheel alignment is necessary after replacement. If the steering gear dust cover is leaking oil, replacing the dust cover and reapplying grease can resolve the issue. Dirty power steering fluid: If the power steering fluid is too dirty, it increases the pressure in the power steering system, causing the power steering pump to produce abnormal noises. The steering system mainly consists of the steering tube, steering wheel, steering shaft, and column. Function of the steering system: The steering system is the mechanism in a car used to change the direction of the vehicle. Its function is to control the direction of travel according to the driver's intention. Like the braking system, the steering system is crucial for vehicle safety.
After driving the Haval H6 for a long time, I also experienced steering noise in my own car. During that repair, it was found that the ball joint pin of the steering linkage was worn out, causing a clicking sound from gear friction during steering, which was quite alarming. Insufficient lubrication is also a common cause, such as dried-up grease inside the steering gear or debris getting stuck. I’ve also heard that if there’s an issue with the electric power steering system, poor electrical contact can cause noise, especially noticeable during low-speed steering. If you hear such sounds while driving, don’t ignore the safety risk, as it could lead to steering failure. It’s advisable to promptly check the chassis components and, if necessary, have them lubricated or replaced by a professional shop to prevent a major accident. Before driving, I also recommend having the steering system checked during regular maintenance—prevention is better than repair. After all, steering noise is no small matter and directly affects handling stability.
As someone who frequently works on my own car, my experience suggests that the clicking noise in the steering of a Haval H6 typically stems from three common causes. First, it could be due to aging steering components, such as wear in the tie rod ball joints or the rack, causing metal friction noises when turning. Second, lack of lubrication or deteriorated grease, especially after water ingress into the steering knuckle during northern winters or after rain. Third, loose connections in the shock absorbers might cause resonance noises. When inspecting it myself, I usually lift the front wheels and manually turn the steering wheel to locate the noise source and check for any loose parts. If the ball joint is found damaged, replacing it is necessary; without the right tools, a professional diagnosis at a shop is more reliable. For regular maintenance, I recommend checking the steering system every six months and applying high-quality grease to extend its lifespan. Keeping the steering system well-maintained ensures safer driving—don’t let minor issues turn into major hazards.
