What is the reason for the Citroen C4L's one-button start not responding?

1 Answers
DelBrooklyn
07/28/25 3:45pm
Citroen C4L's one-button start not responding may be due to a dead battery. Here is a related introduction to the Citroen C4L: 1. In terms of appearance, the length, width, and height are 4675mm, 1780mm, and 1500mm respectively, with a wheelbase of 2710mm. 2. In terms of power: It is equipped with a 1.6THP turbocharged engine. The technical features of direct fuel injection up to 120bars, Twinscroll twin-scroll single turbo technology, and CVVT continuous variable intake timing technology make the 1.6THP turbocharged engine suitable for urban driving conditions, allowing the "T" technology to be fully utilized. It provides high torque at low RPMs, with the turbo starting to engage at 1000 RPM and reaching the maximum torque peak of 240 Nm at 1400 RPM.
Was this review help?
17
1
Share
More Forum Discussions

Is a car carrying 5 adults and 1 child considered overloaded?

A 5-seater sedan carrying 5 adults and 1 child constitutes an overloading violation. The passenger capacity of a private vehicle is determined by the number of seats specified on the vehicle's registration certificate. Traffic regulations regarding overloading do not stipulate the height, weight, or age of passengers but only the "quantity." Therefore, even one additional child (including an infant held in a parent's arms) in a 5-seat car is considered overloading. Here is additional information: 1. Currently, private vehicles are broadly categorized into two types: 5-seaters, typically small sedans, and 7-seaters, usually 7-seat SUVs or minivans. For a private vehicle with a rated capacity of 5, carrying 5 adults and 1 child exceeds the specified limit. 2. Some passengers cannot sit independently in a seat or fasten a seatbelt. In the event of a traffic accident, these passengers, without any protection, are more likely to be thrown out of the vehicle and injured.
19
1
Share

How to Check the Thickness of Car Brake Pads?

Brake pad thickness can be checked visually. For some vehicles, the brake pads can be seen through the gaps in the wheel hub. If the brake pads have worn down to one-third of the standard thickness, it is recommended to replace them. Below are the detailed steps: 1. Visual inspection: The thickness of brake pads can be measured by eye. For some cars, the brake pad thickness can be viewed through the gaps in the wheel hub. Tilt your line of sight at a 15° angle to the plane of the wheel hub and look into the gap between the brake pad and the brake disc to check the thickness. If the brake pads have worn down to one-third of the standard thickness, it is advisable to replace them promptly. 2. Professional measurement tools: Brake pad thickness can also be measured using specialized tools. These tools come with various thickness measurement options and can provide recommendations. Alternatively, you can rely on feel—if the brake pedal feels lighter than usual or braking becomes difficult or ineffective, it may indicate insufficient brake pad thickness, leading to inadequate friction. In such cases, immediate replacement is necessary to avoid accidents.
15
5
Share

What is the fuel tank capacity of Foton Tunland in liters?

Foton Tunland's fuel tank capacity is 80 liters, which is the officially announced data. The fuel grade for Foton Tunland is No. 0 diesel, with a fuel consumption of 9.0 to 14.0L per 100 kilometers. A full tank can cover a distance of 571 to 889 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel in the tank. Generally, this is observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safety limit. There is still some space from the safety limit to the tank opening, which is reserved to allow for fuel expansion when the temperature rises, preventing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
3
4
Share

What is the parts-to-whole ratio of the BMW 3 Series GT?

The parts-to-whole ratio of the BMW 3 Series GT is 25%. Definition of parts-to-whole ratio: The parts-to-whole ratio coefficient is the ratio of the sum of the prices of all parts of a car to the sales price of the whole vehicle. The higher this coefficient, the more expensive the parts of the car are. However, some car manufacturers, in order to "mislead" consumers, only reduce the prices of high-value, low-loss-frequency parts but do not lower the prices of commonly used parts. Although the parts-to-whole ratio coefficient decreases, the actual maintenance costs for consumers do not significantly drop. Therefore, the "common parts burden index" was officially introduced. It refers to the sum of the prices of 18 individual common parts multiplied by their loss rates, divided by the sales price of the whole vehicle. Calculation method of parts-to-whole ratio: The higher the index, the more expensive the common parts are. Of course, if only calculating the parts-to-whole ratio of a single common part, simply divide the price of the single part by the sales price of the whole vehicle. From the overall data, the average parts-to-whole ratio coefficient of the 100 models released this time is 350.93%, an increase of 13.96 percentage points compared to 2019; the average common parts index is 17.31, an increase of 1.15. Over the past two years, the average prices of parts and common parts of these mainstream products have shown an upward trend.
8
2
Share

How Long Does a Car Service Take?

Generally, a routine inspection takes between 40 minutes to 2 hours, but it may take longer if the vehicle has any faults. Here is some relevant information: 1. Service items include: changing the engine oil, replacing the oil filter, checking and topping up the coolant reservoir, checking and topping up the windshield washer fluid, checking and adjusting the tire pressure, and performing a basic engine cleaning. These are the most basic items, and completing all of them typically takes about 2 hours. 2. Therefore, how often a vehicle needs servicing depends on the manufacturer's specific guidelines, which vary for different manufacturers and models. The recommended service intervals and mileage are based on the wear patterns of various components, so they are quite precise.
17
4
Share

Is the Highlander a product of GAC Toyota or FAW Toyota?

The Highlander is an SUV under GAC Toyota. Here are the detailed specifications: 1. Dimensions: The length, width, and height are 4890/1925/1720mm respectively, with a wheelbase of 2790mm. 2. Powertrain: The Highlander is equipped with a 2.0-liter turbocharged four-cylinder engine. This engine delivers a maximum power of 162kw and a maximum torque of 350Nm. It is paired with a 6-speed automatic transmission (6AT), which enhances gear-shifting smoothness and fuel efficiency. 3. Suspension Type: The Highlander features a MacPherson independent front suspension and an E-type multi-link independent rear suspension. The multi-link suspension improves both the vehicle's handling and ride comfort.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.