What is the reason for the car fuel tank cap cover not closing properly?

What is the difference between an original hood and a factory hood?

The dimensions of the original hood and the factory hood are the same, but the paint on the original hood is not factory paint, which may cause color deviation over time. The following is a related introduction about the engine hood: 1. Introduction to the engine hood: The engine hood (also known as the engine cover) is the most prominent body component and one of the parts that car buyers frequently inspect. The main requirements for the engine hood are heat insulation, sound insulation, lightweight, and high rigidity. 2. Principle of the engine hood: The engine hood usually opens by flipping backward, though a small portion flips forward. When flipped backward, the engine hood should open to a predetermined angle without contacting the front windshield, maintaining a minimum gap of about 10 millimeters. To prevent accidental opening due to vibration while driving, the front end of the engine hood is equipped with a safety lock hook mechanism. The lock switch is located under the dashboard in the cabin, and the engine hood should lock simultaneously when the car door is locked.

3

5

Share

How to adjust the time on the Peugeot 408 small screen?

Peugeot 408 small screen time adjustment method is: 1. Enter the original vehicle settings in the navigation settings, click the menu item, and then click the OK button; 2. Use the up and down keys to scroll through the options. When flashing values for year, month, day, hour, and minute appear respectively, use the left and right keys to adjust the numbers for any incorrect values, then click the OK button. The Peugeot 408's engine has a maximum horsepower of 136 hp, is equipped with a 6-speed dual-clutch transmission, and has dimensions of 4750mm in length, 1820mm in width, and 1488mm in height, with a wheelbase of 2730mm. The vehicle's top speed is 205 km/h, the trunk volume is 455L, and it comes with features such as electronic stability control, brake assist, tire pressure monitoring, front seatbelt reminder, and hill start assist.

8

5

Share

How to Determine Idle Motor Failure?

To determine whether the idle motor is faulty, the simplest and most direct method is to check for any fault codes. If present, refer to the displayed fault codes to identify the cause of the issue and address it accordingly. Below is some relevant information about the idle motor: 1. Introduction to the Idle Motor: The idle motor is a component that controls the idle speed of a motor vehicle. When the engine runs without load, it is referred to as idling. 2. Function of the Idle Motor: The idle motor is primarily responsible for managing the vehicle's idle speed, aiming to adjust the idle according to the engine load during idling. During idling, it alters the cross-sectional area of the idle air passage based on the engine temperature and load, ensuring optimal idle speed under various conditions. The idle stepper motor is mounted on the throttle body and is used by the engine controller to regulate the engine's idle speed. When the engine speed deviates from idle, the throttle valve adjusts to control the amount of air entering the intake manifold, which is mechanically operated by the accelerator pedal cable.

17

0

Share

What is the plastic next to the fender?

The plastic next to the fender is called the wheel arch trim. Below is relevant information about the fender: 1. Introduction to the fender: The fender, also known as the wing panel (Fender), is categorized into front fender and rear fender based on its installation position. It refers to a type of covering component on motor vehicles and non-motor vehicles. 2. Function of the fender: The fender is also called the wing panel (named for its shape and position resembling a bird's wing on older vehicle bodies). The fender is located on the outer side of the wheel. Its function, according to fluid dynamics, is to reduce the drag coefficient, making the vehicle's movement more stable. Based on installation position, it is divided into front fender and rear fender. The front fender prevents gravel and mud kicked up by the wheels from splashing onto the underside of the vehicle during driving, thereby reducing damage and corrosion to the chassis.

18

4

Share

Can I Take the Subject 4 Exam Directly in Yiyang?

Subject 4 cannot be taken directly at the exam venue; it requires prior registration either through a driving school or online. Below are relevant details about Subject 4: 1. Main Exam Content: The primary content includes safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident processing knowledge. 2. Retake Instructions: If you fail Subject 4, you do not need to retake the previously passed subjects (Subject 1, Subject 2, Subject 3). You can schedule a retake on your own, and no retake fee is required. There are no restrictions on scheduling the safe and civilized driving theory exam, but the driving skill test permit is valid for three years. If the applicant fails to complete the exam within the validity period, the passed subject scores will be invalidated.

9

2

Share

Where is the BMW airbag module located?

BMW airbag control unit is located under the hood, near the right side of the engine compartment. Function of the airbag module: The airbag control unit integrates electronic devices whose task is to obtain information about vehicle deceleration and acceleration, and determine whether the protection system needs to be activated. Composition of the automotive airbag module: The automotive airbag module includes: Airbag assembly: The airbag assembly mainly consists of a gas generator, igniter, airbag, trim cover, and base plate. SRS warning light: The SRS warning light is located on the instrument panel. When the ignition switch is turned on, the diagnostic unit performs a self-check on the system. Airbag ECU: The ECU mainly consists of an SRS logic module, signal processing circuit, backup power circuit, protection circuit, and voltage stabilization circuit. The safety sensor is usually manufactured together with the SRS ECU in the SRS control component.

8

5

Share

What is the reason for the car fuel tank cap cover not closing properly?

What is the difference between an original hood and a factory hood?

How to adjust the time on the Peugeot 408 small screen?

How to Determine Idle Motor Failure?

What is the plastic next to the fender?

Can I Take the Subject 4 Exam Directly in Yiyang?

Where is the BMW airbag module located?

What Causes the Belt to Squeal When the AC is Turned On?

What are the reasons for the Geely Emgrand EC7 automatic transmission not moving when shifted into gear?

Is the high-low beam switch pulled up or down?

What brand is the original battery of the Qashqai?