What is the reason for the car being weak and slow after replacing the controller?

Is the distance between the left and right lines of the reversing image the width of the car body?

The distance between the left and right lines of the reversing image is not necessarily the width of the car body. The following are two situations regarding the width of the lines on both sides of the reversing image: 1. Original equipment: Under normal circumstances, it is basically the width of the car body; 2. Self-installed later: Most are not the width of the car body, but usually the distance between the tires. Depending on the brand and model of the reversing image, there may also be differences. Additional information: The following is an introduction to the reversing image: 1. When reversing, you need to look at the rearview mirrors on both sides. The reversing image can only serve as an auxiliary function. Because the image in the reversing image has a different distance ratio from reality, and most images will have significant distortion, this distortion will directly affect the accuracy of judging the distance of objects. The most critical function of the reversing image is to ensure there is no blind spot directly behind the car. 2. When choosing a reversing image, pay attention to whether it matches your car model. You can consider factors such as the camera model, power supply voltage, screen size, waterproofing, shock resistance, and anti-interference capabilities.

7

3

Share

What is the process for obtaining a used car export license?

Generally, the operational process for used car exports includes: 1. Domestic vehicle acquisition: Signing purchase contracts and concentrating vehicles at designated locations. 2. Vehicle preparation: Conducting safety performance repairs and necessary refurbishments based on overseas requirements. 3. Vehicle inspection: Performed by qualified third-party inspection agencies, primarily focusing on safety performance. 4. Vehicle transfer: Processing at vehicle management office transfer inspection points, registering under the name of the export-qualified entity. 5. Vehicle deregistration: Completing deregistration procedures with the local vehicle management office within 2 months after customs clearance, using the departure notice. 6. Port departure: Managing the entire process including warehousing and shipping. 7. Customs declaration: Submitting documents and completing online customs declaration.

19

1

Share

Is it okay for someone to unplug the ETC when borrowing a car?

You can remove the ETC card when it is not in use, but be careful not to unplug the card during operation, as this may cause the ETC to malfunction. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly illuminate. The OLED screen will display messages such as "Tag Invalid" or "Please Insert Card," indicating that the device is functioning properly. Clean the front windshield to ensure the glass surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device. Where can ETC be installed: For small vehicles like cars and minivans, the OBU device should be installed in the upper-middle part of the front windshield. For large vehicles like trucks and buses, it should be installed in the lower-middle part. ETC installation requirements: The height should be no less than 1.2 meters and no more than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane).

19

3

Share

Is the turn signal up for left or right?

Down is for the left turn signal, and up is for the right turn signal. Below is the relevant introduction: 1. Turn Signal: The turn signal is an important indicator light that is activated when a motor vehicle turns to alert vehicles and pedestrians around it. The turn signal tube uses a xenon tube, controlled by a single-chip microcomputer circuit, with left and right alternating flashing for continuous operation. The turn signal uses a flasher to achieve light blinking. It can mainly be divided into three types: resistance wire type, capacitor type, and electronic type. 2. Function: As a signal light, the main function of the turn signal during daily driving is to alert surrounding vehicles, indicating an upcoming turn, so that other vehicles can yield to avoid collisions. Therefore, whether turning, changing lanes, overtaking, starting, or parking, as long as the vehicle needs to steer away from the original lane, the turn signal must be activated in advance. This is also a fundamental principle of safe driving.

9

1

Share

How often should small cars be inspected in 2021?

Small and micro non-operational passenger vehicles must be inspected once every 2 years within the first 6 years; once every year after exceeding 6 years; and once every 6 months after exceeding 15 years. Below are the relevant details: 1. Vehicle Inspection: Vehicle inspection refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate. It is equivalent to an annual physical examination for the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety." Vehicle inspections can promptly eliminate potential safety hazards, encourage better vehicle maintenance, and reduce the occurrence of traffic accidents. 2. Notes: Vehicle inspections must be conducted in advance, and un-inspected motor vehicles cannot be driven on the road normally.

13

2

Share

Where is the Parking Light Switch Located?

The parking light is located on the instrument panel, represented by a 'P' inside a circle. The parking light switch is integrated with the instrument panel lights, license plate lights, and taillights, commonly referred to as the small light switch. When this switch is turned on, the parking lights, instrument panel lights, license plate lights, and taillights will illuminate. To turn them off, simply press the small light switch. Below are the applicable scenarios for parking lights: 1. When temporarily parked in dark environments to prevent pedestrians, bicycles, and other vehicles from colliding with the car; 2. Turning on the parking lights effectively serves as a safety warning and contour marker; 3. The parking lights are particularly effective when temporarily parked and leaving the vehicle on narrow provincial, county, or rural roads at night.

4

5

Share

What is the reason for the car being weak and slow after replacing the controller?

Is the distance between the left and right lines of the reversing image the width of the car body?

What is the process for obtaining a used car export license?

Is it okay for someone to unplug the ETC when borrowing a car?

Is the turn signal up for left or right?

How often should small cars be inspected in 2021?

Where is the Parking Light Switch Located?

How Many Turns of the Steering Wheel is Full Lock?

Why is one side always wider than the other when reversing into a parking space?

Are the sides of the reversing image the width of the car body?

What does the parking brake lever mean?