What is the reason for the buzzing noise when stepping on the accelerator after turning on the air conditioning?

Where is the Chevrolet Tracker compressor relay located?

The compressor relay of the Tracker is located next to the engine compartment fuse box, where there are two black components, one of which is the compressor relay. The all-new Tracker is positioned between a subcompact SUV and a compact SUV, featuring Chevrolet's latest family design language, with its English name changed from Trax to Tracker. Below is some relevant information about the Tracker: 1. The body dimensions are 4270mm in length, 1791mm in width, 1618mm in height, with a wheelbase of 2570mm, classifying it as a compact 5-door, 5-seat SUV. 2. It adopts front-wheel drive, with a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension. 3. The Tracker is equipped with a 1.0T turbocharged engine paired with a 6-speed automatic transmission, delivering a maximum power of 92 kW at 5800 rpm and a maximum torque of 180 Nm between 1350 to 4400 rpm.

10

5

Share

Are the Braking Distances of Large Trucks Long or Short?

The longer, the factors affecting braking distance include the following: 1. Suspension system: It is generally difficult to associate the suspension system with braking distance, but in fact, the suspension system does have an impact on braking distance. During emergency braking, the vehicle's center of gravity shifts forward, compressing the front suspension. If the front suspension lacks sufficient support, it can lead to excessive forward shift of the vehicle's center of gravity, reducing the rear tires' grip and weakening their braking effect, thereby increasing the braking distance. Some vehicles exhibit severe front-end dipping during braking, which is a sign of poor front suspension support. 2. Vehicle weight: The greater the weight of the vehicle, the greater the inertia, making it harder to stop. Therefore, vehicle weight also has a direct impact on braking distance. However, this does not mean that heavier vehicles necessarily have longer braking distances than lighter ones. For example, some performance cars weigh much more than family A-segment cars but have much better braking performance because factors like tires and braking systems must also be considered. The effect of vehicle weight on braking distance mainly manifests in that for the same vehicle, under the same braking system, the greater the load, the longer the braking distance. 3. Tires: Tires are the medium through which the braking system operates. The better the tire grip, the more braking force can be obtained during braking, and the shorter the braking distance can be. For general family cars, the main factor affecting braking distance is tire width—the wider the tire, the larger the contact area, and the greater the braking force. 4. ABS: ABS stands for Anti-lock Braking System, which prevents wheel lock-up, ensuring vehicle control during emergency braking. Research has found that the ground braking force is greatest when the wheel slip ratio is between 15%-20%, providing the best braking effect. Therefore, ABS systems are designed to maintain the slip ratio of nearly locked-up tires within this range to achieve optimal braking performance. Thus, on dry roads, ABS can achieve a shorter braking distance than locked-up tires during emergency braking when tires are about to lock up. Always pay attention while driving.

6

2

Share

How to manually reset the maintenance light for the 2018 MG6?

The specific steps to reset the maintenance light for the 2018 MG6 are as follows: 1. Turn on the ignition switch, hold down the "Reset Button 5" with one hand, and turn off the ignition switch with the other hand. 2. Keep holding the "Reset Button 5" until the clock and mileage on the dashboard completely disappear, then release the button. 3. Press and hold the "Reset Button 5" again with one hand, then turn on the ignition switch. At this point, the maintenance reminder on the dashboard will flash. Wait until the reminder stops flashing, then release the button. Below is some related information about the all-new MG6: The all-new MG6 is the first mass-produced vehicle based on the previous MGE-motion concept car, naturally incorporating many design elements from the concept car in its appearance. Officially dubbed the "Starlight Rider Shield Grille" and "London Eye Reflection" designs, these features further enhance the vehicle's appeal. The all-new MG6 features a dot-matrix design for the front grille, with the lower part shaped into a trapezoid. The side profile adopts a dual-waistline design, with the upper waistline extending from the rear of the headlight to the rear door panel, complementing the gently sloping roofline.

10

5

Share

Is ETC Required for Free Toll During Holidays?

During legally designated free holidays, passing through highway toll stations is free for all vehicles, regardless of whether they have ETC or not. How ETC Works: Through dedicated short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, coupled with computer networking technology for backend settlement processing with banks, ETC enables vehicles to pass through highway or bridge toll stations without stopping to pay fees. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes green and low-carbon travel by reducing noise and exhaust emissions as vehicles pass through toll stations without stopping; Cost reduction: Saves on expenses by minimizing vehicle acceleration and braking frequency, thereby reducing wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: Theoretically, ETC lanes can increase vehicle passing efficiency by 2-3 times, making traditional ETC faster, more advanced, and high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.

11

0

Share

How to Replace the Air Conditioning Filter in the New BMW 5 Series?

The new BMW 5 Series has two sets of air conditioning filters, and the replacement methods are as follows: 1. One set is located on the passenger side in the engine compartment. Use specialized tools to remove the old filter and replace it with a new one. 2. The other set is in the area outside the passenger's left leg, secured by clips. Use tools to pry it open, remove the old filter, and replace it with a new one. Below are the detailed steps for removing and installing the air conditioning filters: (1) Replacing the filter in the glove compartment: ① Locate the fixing device, usually found below the glove compartment. ② Remove the protective panel, ensuring to loosen the fastening device first. ③ Unscrew the screws on the curved cover, remove the cover, and pull out the air conditioning filter. ④ The filter can be reused if it's not too dirty; cleaning it is also an option. ⑤ Install the new filter. Installation tip: The end with letters usually faces you for correct installation. (2) Replacing the filter in the engine compartment: ① Carefully remove the waterproof rubber strip along the groove, then locate and remove the clips to take off the plastic cover smoothly. ② Now you can see the external filter. Remove the old air conditioning filter and install the new one in the correct direction.

18

1

Share

Can Antifreeze Be Added?

Antifreeze can be added, but it is not recommended to add it directly. Before adding antifreeze to your car, it is necessary to thoroughly clean the engine cooling system, especially during seasonal transitions when the antifreeze should be inspected. If the antifreeze level is insufficient, it should be replenished promptly. Cleaning before adding antifreeze is primarily to prevent chemical reactions between scale deposits in the engine and the antifreeze, as the detachment of scale can affect the normal performance of the antifreeze. Antifreeze is designed to prevent the coolant from freezing during cold winter parking, which could otherwise cause the radiator to crack or the engine cylinder block to freeze. Its full name is antifreeze coolant.

16

5

Share

What is the reason for the buzzing noise when stepping on the accelerator after turning on the air conditioning?

Where is the Chevrolet Tracker compressor relay located?

Are the Braking Distances of Large Trucks Long or Short?

How to manually reset the maintenance light for the 2018 MG6?

Is ETC Required for Free Toll During Holidays?

How to Replace the Air Conditioning Filter in the New BMW 5 Series?

Can Antifreeze Be Added?

Where is the engine of the Besturn B70 produced?

Which Volkswagen model is Sagitar?

What's the Difference Between 1.5L and 2.0L?

Can the rear seats of the GL8 be folded flat?