What is the reason for the BMW 320 air conditioner not cooling?

2 Answers
ArianaMarie
07/23/25 11:46pm
BMW 320 air conditioner not cooling reasons are as follows: 1. The car condenser is too dirty: The condenser is part of the car air conditioning system, and its main function is heat dissipation. If the vehicle is used in a poor environment, dust and other dirt can easily adhere to it, leading to poor heat dissipation performance, which in turn reduces the cooling efficiency of the air conditioner. 2. The car air filter has not been replaced for a long time: The car air filter is a 'filter barrier' for the air entering the car from outside. If the car air filter is covered with dust, the air output of the air conditioner will decrease, and the corresponding cooling effect will be significantly reduced, affecting the car's cooling performance. Moreover, not replacing the air filter for a long time can also pollute the air inside the car and increase the noise level. 3. The car air conditioner lacks refrigerant: A lack of refrigerant is also an important reason for the car air conditioner not cooling. Once it is determined that the lack of refrigerant is causing the air conditioner not to cool, simply adding the corresponding refrigerant at a car repair shop can solve the problem.
Was this review help?
6
1
Share
StKaleb
08/10/25 7:33pm
I've been driving a BMW 320 for almost ten years and have encountered several instances where the air conditioning stopped cooling, which is actually quite common. Usually, it's due to insufficient refrigerant because the sealing rings in BMWs tend to age and leak easily; or the compressor might be broken, as it wears out significantly with prolonged use. You can first check the fuse box yourself by pulling them out to see if any are blown; then listen for any noise when the compressor starts—if there's no sound, it might indicate a fault. Sometimes, a stuck fan or a short circuit in the circuit board can also cause it to stop working. Don't force it to avoid damaging other components; instead, quickly take it to a repair shop to have a mechanic check the refrigerant pressure. This way, you won't have to endure the heat and sweat during hot weather, which is uncomfortable and affects concentration. Regularly replacing the refrigerant can prevent this issue. I service my air conditioning system every year before summer.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

What to Do When Car Fuel Tank Pressure is Too High?

If the fuel tank cap pressure regulator valve is clogged, it can cause excessively high pressure inside the fuel tank. In this situation, it should be disassembled and thoroughly cleaned. If the fuel tank is overfilled during refueling, some fuel may evaporate and enter the carbon canister, forming particles inside that can cause blockages. If the solenoid valve is damaged, the engine's pipeline system cannot properly ventilate to form a circuit, preventing fuel vapor from being released and thus causing internal pressure to rise. When fuel tank pressure is too high, it is necessary to promptly clean the fuel lines or replace the filter. Fuel tank cleaning is divided into two steps: internal and external.
3
1
Share

What is the reason for the SYS warning light in a car?

The SYS warning light on the car dashboard indicates a minor fault in the engine system. It is generally caused by abnormal air intake or ignition issues. Below are the hazards of irregular car maintenance: 1. Clogged air filter: A blocked or excessively dirty air filter can cause poor engine air intake, allowing large amounts of dust to enter the cylinders. This accelerates carbon buildup in the cylinders, leading to poor ignition, reduced power, and naturally increased fuel consumption. 2. Increased sludge: There are many reasons for sludge buildup at the valves, including carbon deposits formed from fuel combustion exhaust at the throttle body, as well as impurities not filtered by the air cleaner that accumulate at the throttle body. Excessive sludge can cause air intake resistance, leading to increased fuel consumption.
4
4
Share

How much refrigerant should be added to the Baojun 730?

Baojun 730 requires approximately 4 to 5 bottles of refrigerant. The function of refrigerant is to utilize its physical changes to remove heat from the vehicle. Under high pressure, the refrigerant forms a liquid while releasing heat. The effects of overfilling refrigerant include: 1. Increased pressure in the air conditioning system, triggering high-pressure alarms and frequent compressor shutdowns; 2. Reduced cooling efficiency; 3. Damage to air conditioning components; 4. Risk of bursting air conditioning pipes. The method for discharging excess refrigerant is: 1. Prepare a car refrigerant recovery and filling machine along with a refrigerant tank; 2. Connect the machine's pipes to the high and low-pressure pipes of the car's air conditioning system; 3. Set the required refrigerant recovery capacity and initiate the recovery process.
12
4
Share

What is Coolant?

Automotive coolant, also known as antifreeze coolant, is a medium that ensures the proper functioning of water-cooled engines. The main components of coolant are: water, antifreeze, and additives. Depending on its composition, it can be classified into: alcohol-based, glycerol-based, and ethylene glycol-based. The functions of automotive coolant are: 1. Prevent engine block from cracking: Prevents the coolant from freezing and causing the radiator and engine block to crack after parking in winter. 2. Prevent corrosion: Protects the radiator, water pump, engine block and cylinder head, and water distribution pipes from corrosion. 3. Reduce scale formation: Minimizes scale buildup to avoid clogging the circulation pipes and affecting the cooling system's heat dissipation function. 4. Meet cooling demands: Satisfies the heat dissipation and cooling requirements of high-load engines.
8
5
Share

How to solve Volkswagen U105400?

Volkswagen U105400 solution methods are: 1. Check if there is a problem with the transmission; 2. No communication between the gateway and the transmission mechatronic unit; 3. The transmission can be replaced. Taking the 2019 Volkswagen Polo as an example, its body dimensions are: length 4053mm, width 1740mm, height 1449mm, wheelbase 2564mm, fuel tank capacity 42.5l, curb weight 1145kg. The 2019 Volkswagen Polo has a front suspension of MacPherson independent suspension, rear suspension of torsion beam non-independent suspension, equipped with a 1.5L naturally aspirated engine, maximum horsepower 113ps, maximum power 83kw, maximum torque 145nm, matched with a 5-speed manual transmission.
2
0
Share

What does it mean when the engine oil needs to be changed?

It indicates that the maintenance mileage/time set in the vehicle's computer has been reached, reminding the owner to change the engine oil and perform maintenance as soon as possible. Below is more information about car maintenance: 1. Definition of car maintenance: It refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. 2. Main contents of car maintenance: Includes maintenance of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Purpose of car maintenance: To keep the vehicle clean and tidy, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.