What is the reason for the automatic parking failure preventing the car from starting?

1 Answers
LeBentley
07/29/25 6:14pm
Automatic parking failure preventing the car from starting is caused by the automatic parking button being stuck or the ABS pump being damaged. The following are detailed explanations: Automatic parking button stuck: The automatic parking button is stuck, preventing the automatic parking function from being released. Solution: Check for any foreign objects. If none are found, reset the electronic parking brake. Turn on the car key, press the foot brake, then press and hold the electronic parking brake down for 5 seconds, followed by pulling it up for 5 seconds. This will initialize and reset the electronic parking brake. ABS pump damage: Damage to the ABS pump prevents the car from starting. Solution: Replace the ABS pump with a new one.
Was this review help?
5
0
Share
More Forum Discussions

Where to Print ETC Invoice?

To print ETC invoices, you can log in to the electronic invoice service platform for toll roads and follow the on-page instructions to issue electronic invoices yourself. Below is relevant information about vehicle ETC processing: ETC Introduction: ETC stands for Electronic Toll Collection system on highways. ETC-dedicated lanes are designed for vehicles equipped with ETC onboard units, adopting electronic toll collection methods. Automatic Highway ETC Application Process: Drive the application vehicle to an ETC service outlet to apply for a pass card (qualified applicants may request on-site installation), submit valid identification and the original vehicle license, staff will issue an electronic tag, and outlet personnel will perform on-site installation.
1
0
Share

Will the Car Lock If the Key Is Left Inside?

Leaving the car key inside the vehicle can result in the car locking itself. Most modern cars are equipped with an automatic locking feature. Here are some details about the auto-lock function: After the vehicle is turned off, if the doors are closed without the key, both the doors and the trunk will automatically lock after a few minutes. The auto-lock engages quickly after driving starts, providing a safety measure to prevent door-opening thefts during traffic jams or while waiting at traffic lights.
3
3
Share

What is the fuel consumption of the Xingyue L?

The actual fuel consumption of the Xingyue L is 8.52L/100km. Here are some methods to reduce fuel consumption while driving: Enhance vehicle maintenance: Vehicle adjustments and maintenance affect engine performance and driving resistance. Owners should regularly visit auto repair shops for routine maintenance, such as checking tire pressure, wheel alignment, adjusting the gap between brake friction pads and brake drums, lubricating various points on the vehicle chassis, changing engine oil on schedule, and inspecting filters. Additionally, when selecting engine oil, choose the one with the lowest viscosity among the specified models in the manual, as higher viscosity increases friction and consequently fuel consumption. Avoid prolonged engine idling: Engine fuel consumption during idle parking is much higher than during normal driving. If the vehicle is not moving for a long time, such as when waiting for someone, it is best to turn off the engine. During cold starts, do not warm up the engine for more than 1 minute; maintaining low-speed driving for a few minutes is sufficient.
9
5
Share

What does full payment for the bare car mean?

Full payment for the bare car refers to the on-road price, which includes all costs such as vehicle insurance, purchase tax, license plate registration, etc. The total sum of these costs is the on-road price. More information about the full payment bare car price is as follows: Meaning of full payment bare car price: The full payment bare car price is similar in meaning to the bare car price, but the payment method differs, requiring full payment. The bare car price does not include additional costs such as purchase tax and insurance. Paying the full amount eliminates the need for installment payment procedures, avoids the requirement for GPS installation or renewal insurance deposits, and generally allows for cheaper insurance purchases. Calculation method for full payment bare car price: Bare car price = manufacturer's suggested retail price - discount amount.
12
0
Share

What are the effects of having too much coolant?

After adding too much coolant, it may cause excessive pressure in the coolant expansion tank. The introduction of automotive coolant and precautions when filling are as follows: Introduction: The full name is antifreeze coolant, meaning it is a coolant with antifreeze function. Coolant consists of three parts: water, antifreeze, and additives. According to the different components of antifreeze, it can be divided into alcohol type, glycerol type, ethylene glycol type, and other types of coolant. Precautions: Do not open the cap rashly when the radiator "boils." Do not spill water on the engine when adding water. Avoid human contact with antifreeze. Do not mix different types of antifreeze. Do not operate the engine without water. After the water inlet shows full, start the engine and let it run. When the engine temperature rises to the point where the thermostat opens, the air in the water jacket will be expelled, and the water level will drop. At this time, refill the radiator to full.
2
4
Share

Symptoms of a Faulty Common Rail Pressure Relief Valve?

Symptoms of a faulty fuel pump pressure relief valve include: the valve disc not reseating after discharge, primarily caused by a bent spring valve stem, improper installation of the valve disc, or it being stuck. Failure to open at the specified pressure: The reasons for this include inaccurate pressure setting; the valve disc sticking to the valve seat; the lever of a lever-type safety valve getting stuck or the counterweight being moved. Continued rise in pressure after discharge: This is mainly due to the selected safety valve having insufficient discharge capacity; misaligned valve stem centerline or a rusty spring preventing the valve disc from opening to the required height. Valve disc chattering or vibration: Primarily caused by excessive spring stiffness; improper adjustment of the adjusting ring; excessive discharge pipe resistance, leading to high discharge backpressure. Opening below the specified pressure: Mainly due to inaccurate pressure setting or aging spring reducing its elasticity.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.