What is the reason for the Audi A3's tire pressure light being on when the tire pressure is normal?

How to Find the Entrance of the S-curve in Subject 2?

Actually, finding the entrance of the S-curve in Subject 2 is not difficult. Before entering the entrance, remember to keep the car body straight and slightly to the left. That is to say, before entering the S-curve entrance, the car body should be aligned with the entrance; secondly, from the driver's perspective, the 12 o'clock position of the steering wheel should not be directly aligned with the center of the road but adjusted slightly to the left, with the car body also slightly to the left, making it less likely for the front wheels to cross the line when entering the curve. The simplest method for the S-curve in Subject 2: 1. Drive into the S-curve test area at a low speed. Before entering the curve, adjust the car to be slightly to the left of the road as described above, with the car body aligned with the entrance; 2. After entering the S-curve, observe the left one-third of the car's front. When it aligns with the right road edge, turn the steering wheel one full turn to the left; 3. After turning, keep the one-third point of the car's front along the road edge. If the alignment is less than one-third, continue turning the wheel half a turn to the left. If it exceeds, slightly turn the wheel back to the right until exiting the first curve; 4. After exiting the first curve, turn the steering wheel an additional half turn to the left. When the left one-third of the car's front aligns with the left road edge, straighten the wheel. Continue observing, and when the raised rivet of the wiper point is 10 cm to the right and aligns with the left road edge, turn the steering wheel one full turn to the right; 5. During the process, pay attention to the rearview mirror to ensure the rear wheels do not cross the line, and straighten the wheel after exiting the curve.

11

0

Share

Do I need to bring my ID card for the Subject 1 exam?

You only need to bring your ID card for the exam. The admission ticket and other documents are handled by the driving school, which will distribute them during the exam. Electronic ID cards cannot be used for the exam. If you don't have an ID card, you can apply for a temporary ID card, which has the same validity as a formal ID card. The "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" clearly stipulate that the Subject 1 exam can be taken twice on the same day. If you fail the first attempt, you can retake it for free the second time. If you still fail the second attempt, the Subject 1 exam will be terminated, and you can only reschedule the exam after ten days. The Subject 1 exam consists of 100 questions, divided into single-choice questions and true/false questions, with each question worth 1 point and a total score of 100 points. If you answer 11 questions incorrectly during the exam, the system will automatically submit the test and end the exam. The Subject 1 exam is a computer-based test with a duration of 45 minutes. The content of the Subject 1 exam includes: regulations on driver's licenses and motor vehicle management; road traffic conditions and regulations; road traffic safety violations and penalties; regulations on road traffic accident handling; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge of wheeled self-propelled machinery, trams, and trolleybuses. Notes for the Subject 1 exam: Candidates should pay attention to their attire and are not allowed to wear slippers. Electronic devices and bags are not permitted in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures on the large screen and store personal belongings in the lockers before entering the exam room. Upon entering the exam room, the identity verification station will assign a seat. After finding your seat, begin the exam. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, you can retake it the same day. If you fail again, you will need to pay to reschedule the exam. After the exam, queue to collect your score report and sign it. Failure to sign will render the result invalid. There is no limit to the number of times you can reschedule the Subject 1 exam. Each subject can be taken once, and if you fail, you can retake it once. If you do not attend the retake or fail the retake, the exam will be terminated, and you must reschedule the exam. For Subject 2 and Subject 3, there are only five exam attempts. If you fail all five attempts, the previously passed road driving skill test scores will remain valid. There are three subjects in the driving test: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the exam on road traffic safety laws, regulations, and related knowledge. Subject 2 refers to the field driving skill exam. Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge. The safe and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, in official terms (i.e., the Ministry of Public Security's Order No. 123), there is no such thing as Subject 4.

18

5

Share

How to Repair a Cracked Rear Bumper?

Repair methods for a cracked rear bumper: 1. Use a plastic welding gun for repair: By heating and melting the plastic welding rod and the surface of the film, it achieves melting and bonding; 2. After repairing the crack, it is also necessary to perform touch-up painting and then dry it. However, for some larger cracks, repair may not be possible, and a new bumper may need to be replaced. The front and rear ends of the car are equipped with bumpers, which are made of plastic. They not only have a decorative function but, more importantly, serve as safety devices that absorb and mitigate external impacts, protecting the car body and the safety of passengers.

1

2

Share

How to Perform Tire Rotation?

Tire rotation methods are as follows: 1. For bias-ply tires, swap the tires on the same axle to ensure even wear on both sides; 2. For radial tires, rotate them within the same side of the vehicle. The benefits of tire rotation include: 1. Promoting even tire wear; 2. Extending tire lifespan; 3. Preventing irregular tire wear; 4. Enhancing driving safety. Tire maintenance methods are: 1. Maintain correct tire pressure; 2. Regularly inspect tires for bulges, cracks, cuts, punctures, or abnormal wear; 3. Check tire surfaces for stones, nails, or other hard objects and clean them promptly; 4. Perform four-wheel rotation.

13

3

Share

What car is the 'keys' in the middle of the steering wheel?

The 'keys' in the middle of the steering wheel is not a car brand's logo. The 'keys' emblem on the steering wheel is actually 'key!s', which is a brand of quick-release steering wheels specifically designed for competitive racing. Since modified steering wheels are universal, any steering wheel that fits its base can be installed. The steering wheel is a wheel-shaped device used to control the direction of travel, and its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. As quick-release steering wheels are mostly used in competitive racing, to reduce weight and simplify the structure, such steering wheels are not equipped with airbags or other electronic control systems.

15

3

Share

Where is the door drain hole of the Infiniti Q50L?

The door drain hole of the Infiniti Q50L is located inside the door seal strip at the bottom of the door. You can see it by flipping the door seal strip outward. Since the drain holes on the door are positioned low, they are prone to clogging with mud when driving on muddy roads. Therefore, it is essential to clean the door drain holes promptly. Taking the 2019 Infiniti Q50L as an example, its body structure is a four-door, five-seat sedan with the following dimensions: length 4867mm, width 1823mm, height 1456mm, wheelbase 2898mm, fuel tank capacity 76L, trunk capacity 500L, and curb weight 1721kg.

15

5

Share

What is the reason for the Audi A3's tire pressure light being on when the tire pressure is normal?

How to Find the Entrance of the S-curve in Subject 2?

Do I need to bring my ID card for the Subject 1 exam?

How to Repair a Cracked Rear Bumper?

How to Perform Tire Rotation?

What car is the 'keys' in the middle of the steering wheel?

Where is the door drain hole of the Infiniti Q50L?

What is a car body usually composed of?

Is the Cruze a Three-Cylinder Engine?

What are the body dimensions of the BMW 8 Series Gran Coupe?

What does the exclamation mark warning light in a Mercedes-Benz mean?