What is the reason for the anti-skid light on the Volkswagen Sagitar indicating a sensor failure?

1 Answers
MaliaAnn
07/29/25 9:05pm
The reason for the anti-skid light on the Volkswagen Sagitar indicating a sensor failure is related to severe engine carbon deposits. It is recommended to go to a 4S shop to clean the internal carbon deposits in the engine, clean the fuel injectors, clean the dirty intake manifold, and remove the carbon layer on the exhaust valve. The car's anti-skid system: The car's anti-skid system is another set of anti-skid control systems following ABS, and it is a further development and supplement to the ABS system. The main purpose of the anti-skid system: The main purpose of the anti-skid system is to prevent the driving wheels from slipping when the vehicle starts and accelerates, effectively maintaining the stability of the car's driving direction. It controls the sliding within a certain range, thereby preventing the sliding wheels from rapidly losing direction.
Was this review help?
7
0
Share
More Forum Discussions

What is the relationship between torque and power?

The relationship between torque and power: Power P = Torque × Angular velocity ω. Since power P = Work W ÷ Time t, and work W = Force F × Distance s, therefore P = F × s/t = F × Velocity v. Relevant information about automotive power is as follows: 1. Introduction: Automotive power refers to the work done by a car per unit time, and power refers to the work done by an object per unit time. The greater the power, the greater the torque, and the higher the pulling force of the car. Maximum power is commonly used to describe the dynamic performance of a car. 2. Maximum power: It is generally expressed in horsepower (PS) or kilowatts (kW), where 1 horsepower equals 0.735 kilowatts. Power is a physical quantity that indicates how fast an object does work. In physics, power P = Work W / Time t, and the unit is watt (W).
3
2
Share

How many seconds does the yellow light last before turning red?

The yellow light lasts for 3 seconds before turning red. Here is some relevant information about traffic lights: 1. Introduction: Traffic lights are signal lights that direct traffic operation. 2. Classification: Traffic lights are divided into motor vehicle signal lights, non-motor vehicle signal lights, pedestrian crossing signal lights, direction indicator lights (arrow signal lights), lane signal lights, flashing warning signal lights, and railway crossing signal lights. 3. Light colors: Initially, there were only red and green colors. Later, after improvements, a yellow light was added. The red light means stop, the yellow light means prepare, and the green light means go. The reason for using these three colors as traffic signals is related to people's visual structure and psychological reactions.
13
5
Share

Will the traffic police impound a vehicle in locked status?

When a vehicle is in a locked status, it cannot be driven on the road. Otherwise, if discovered by law enforcement authorities such as traffic police, the vehicle will be impounded. The following situations may result in a vehicle being locked: 1. Failure to repay car loans on time: For vehicles purchased through installment loans, if the borrower stops repaying the loan after just 3 months despite making the initial down payment, the vehicle will be locked. Missing payments for 3 months may lead to repossession, but complete cessation of payments may be considered contract fraud, resulting in the vehicle being locked. 2. Involvement in criminal cases: According to relevant laws, vehicles involved in criminal cases may be seized by investigative authorities. 3. Major accidents: Vehicles involved in major accidents that remain unresolved (though these can be unlocked) will be locked. This includes cases where accidents are not settled, hit-and-run incidents, or suspected vehicles, all of which can be identified through the traffic police's internal network. 4. Owner request or court order: Vehicles may be locked at the owner's request or by court order.
18
0
Share

What is the emission standard for 2009 cars?

2009 cars comply with the China IV emission standard. Below is relevant information about China IV: 1. Introduction: The China IV emission standard is the fourth-phase national standard for motor vehicle pollutant emissions. Automobile emissions mainly include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), PM (particulate matter), etc. Through technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, it controls and reduces vehicle emissions below specified limits. 2. Issues: From a management perspective, local governments clearly dominate in negotiations with automakers - non-compliant vehicles cannot be sold, which has caused significant anxiety among manufacturers with "China III" models. However, local governments may be at a disadvantage when negotiating with giants like Sinopec and PetroChina.
18
3
Share

What to Do When a Nail Punctures the Car Tire?

Here are the steps to handle a nail puncture in a car tire: 1. Get out and inspect: Always exit the vehicle to check. Many modern cars with advanced configurations come equipped with a tire pressure monitoring system. Test whether the tire pressure is within the normal range. It's advisable to keep a simple gauge handy. If the pressure is below the normal range, immediate action is recommended. 2. Visit a repair shop: You can temporarily avoid changing to the spare tire and drive slowly to the nearest repair shop for a patch or a new tire replacement. 3. Change to the spare tire: If you have experience in changing tires, you can switch to the spare tire to ensure safe driving afterward. Note that spare tires are generally not suitable for high-speed driving. Repair the punctured tire promptly and reinstall it. 4. Wait for roadside assistance: If you're on a highway or in a remote area without the means for self-help, you can opt for roadside assistance and wait for professional handling.
1
4
Share

What are the body dimensions of the 10th-generation Accord?

The body dimensions of the all-new 10th-generation Accord are 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm. Below is a detailed introduction about the Accord: 1. Overview: The Accord (Accord) is a testament to Honda's innovative spirit and globally leading technology. The original tires equipped on the Accord are Michelin's ultra-high-performance Pilot Super Sport tires. 2. Others: To address changes in contact area during high-speed cornering, Michelin employs Variable Contact Patch technology on the PSS. The luxury version is equipped with 215/60R16 Michelin tires. It features high-strength transmission belts for a wide gear ratio range, ensuring efficient transportation. Through 'G-Design Shift' control technology, it quickly responds to the driver's demands.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.