What is the reason for the airbag light in the Lavida being on?

2 Answers
BeauFitz
07/28/25 9:29pm
The reason is that there may be a malfunction in the airbag system. Here are the relevant details about the airbag: 1. Composition: It mainly consists of an airbag sensor, a collision airbag, and an electronic control device. The driver-side collision airbag is installed in the steering wheel, while the passenger-side collision airbag is generally installed on the dashboard. 2. Principle: When a collision occurs while the car is in motion, the airbag sensor first receives the impact signal. If the impact reaches the specified intensity, the sensor activates and sends a signal to the electronic controller. Upon receiving the signal, the electronic controller compares it with its stored data. If the conditions for airbag deployment are met, the driving circuit sends a start signal to the gas generator in the airbag assembly. Once the gas generator receives the signal, it ignites the gas-producing agent, generating a large amount of gas. This gas is filtered and cooled before entering the airbag, causing the airbag to rapidly expand and break through the padding in an extremely short time.
Was this review help?
6
4
Share
DeBradley
08/12/25 2:07am
I've been driving my Lavida for a long time and have encountered the airbag warning light coming on several times, which always makes me nervous. The most common reason is poor sensor contact, such as loose or dirty connectors under the seat—dust buildup can easily trigger false alarms. Aging wiring is another major issue; worn or short-circuited wires can interfere with signals. The airbag module itself might also be faulty—if the control unit fails, the light will come on. Checking the fuses is crucial, as a blown fuse can cause unstable current and make the light flash. Remember to try restarting the vehicle; sometimes, false alarms will disappear. However, airbags are life-saving guardians, so don’t delay. If the light stays on, immediately visit a repair shop for a computer diagnosis to prevent the airbags from failing in an accident. Safety always comes first. Regularly cleaning the interior and reducing clutter can help minimize such issues.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

Is Coating or Crystal Coating Better for New Cars?

Crystal coating is better for new cars. The main differences between the two are: 1. Difference one: Crystal coating forms a solid crystalline layer on the paint surface to protect it, whereas coating and glaze sealing do not form crystals on the paint surface, and their hardness is also lower than that of crystal coating. 2. Difference two: In terms of durability, coating protection lasts about 1 year, while crystal coating can last up to 2 years, offering longer lifespan and more stable performance. 3. Difference three: Crystal coating is more stringent and involves a complex application process in a dust-free environment. The products used in coating, although they can form a layer on the paint surface, do not crystallize or harden. Over time, they react with oxygen in the air, eventually decomposing and being washed away by water.
5
2
Share

Why Do Cars Drip Water in Summer?

It is quite normal for a car's exhaust pipe to drip water, which indicates that the engine is working properly, with complete combustion and good atomization effect. Reasons: The dripping water from the car's exhaust pipe is due to the fact that after the gasoline is completely burned, it produces water and carbon dioxide. Water at high temperatures is in the form of water vapor, which is colorless and transparent. However, when the temperature drops below 100 degrees, the water vapor condenses into water. If the condensed water droplets are very small and suspended in the air, the water vapor appears as white gas. When the ambient temperature is low, the white smoke from the exhaust pipe is water vapor. If the condensed water droplets accumulate, they turn into water. Minimum conditions for exhaust pipe dripping: The mixture ratio of gasoline and air is correct. The engine's cylinder pressure is normal. The exhaust pipe temperature is low.
13
2
Share

What to Do When the Front Windshield Is Frozen?

Solutions for a frozen front windshield are as follows: 1. Warm up the car sufficiently to allow the engine coolant temperature to rise. When there is frost on the front windshield, do not use the wipers to scrape the ice. Instead, let the car idle to warm up, and avoid driving slowly to warm it up. 2. Use the heater to blow warm air on the front windshield. Once the engine coolant temperature has risen, turn on the heater and set it to blow upward onto the windshield at the highest setting. 3. Use a car defroster spray. If you want to melt the frost on the windshield faster, you can use a specialized car defroster spray. 4. Methods to prevent frost on the windshield. If you open the windows when parking at night to equalize the temperature inside and outside the car before closing them, the car glass will not frost over the next day.
17
5
Share

Why are car refrigerant pipes not wrapped?

Car refrigerant pipes are not wrapped because they need heat dissipation. The functions of an air filter include the following 3 points: 1. Provide fresh air: It prevents the car windows from fogging up, ensuring clear visibility for the driver and safe driving; it supplies fresh air to the cabin, preventing passengers from inhaling harmful gases and ensuring driving safety; it effectively sterilizes and deodorizes. 2. Ensure safety and hygiene: It keeps the cabin air clean and free from bacterial growth, effectively separating solid impurities such as dust, core powder, and grinding particles from the air; it effectively blocks pollen, ensuring that passengers do not experience allergic reactions that could affect driving safety. 3. Adsorb harmful substances: It adsorbs moisture, soot, ozone, and odors from the air, with strong and durable moisture adsorption capabilities.
17
4
Share

What are the benefits of high-octane fuel?

High-octane gasoline can prevent engine knocking, and using high-octane fuel allows for more advanced ignition timing, which can also enhance power. The following is relevant information: 1. Highest octane rating: Currently, the highest octane rating available is 100# gasoline. Gasoline is divided into various octane ratings, commonly including 90#, 93#, 97#, 98#, and so on, with some regions even offering 100# gasoline. These different ratings represent varying octane levels—the higher the rating, the higher the octane level, indicating better anti-knock performance of the gasoline. 2. Octane rating: The octane rating is a numerical value representing the gasoline's ability to resist knocking during combustion. The higher the octane rating, the better the anti-knock performance.
9
2
Share

How to Remove the Crown Crankshaft Pulley Bolt?

Crown crankshaft bolts can be removed using specialized tools. Below is relevant information about Crown crankshaft bolts: 1. The crankshaft is the most critical component in an engine. It withstands the force transmitted from the connecting rod and converts it into torque, which is then output through the crankshaft to drive other engine accessories. 2. The crankshaft is subjected to centrifugal force from rotating masses, periodically varying gas inertial forces, and reciprocating inertial forces, causing it to endure bending and torsional loads. 3. It prevents oil deterioration and leakage from crankshaft oil seals and crankcase gaskets. 4. The lower part of the cylinder block where the crankshaft is installed is called the crankcase, which is divided into upper and lower crankcase sections.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.