What is the reason for the 408 not starting and making abnormal noises?

What are Headlights, Position Lights, and Tail Lights?

Headlights: Headlights are devices installed on both sides of the front of a vehicle, used to illuminate the road during nighttime driving. The lighting effect of headlights directly impacts nighttime driving operations and traffic safety. Therefore, traffic management authorities worldwide generally regulate the lighting standards of vehicle headlights by law to ensure safe nighttime driving. Additionally, headlights can be either two or four in number, with two being the most common configuration. When headlights are turned on, position lights are automatically activated by default. Position Lights: Position lights are the outermost lights at the front and rear of a vehicle. Large trucks also have position lights on their roofs and sides. Literally, 'position' means warning, and 'light' means outline, so position lights are designed to display the outline of the vehicle, serving as a warning to other vehicles. Position lights are typically installed along the edges of the vehicle's roof, indicating both the height and width of the vehicle. The symbol for position lights is two lights facing opposite directions. Tail Lights: Tail lights are essentially brake lights. When the light switch is turned to the first position, the small lights that illuminate at the front and rear are tail lights (also referred to as evening driving lights, used when it is not completely dark; the next setting after position lights is low beam, while high beam refers to the main headlights). Position lights and tail lights may seem similar, but they serve different purposes. Position lights are installed along the edges of the vehicle's front and are responsible for warning signals, alerting other vehicles to the width of the car. Tail lights, on the other hand, are installed at the rear of the vehicle and emit red light when illuminated. When the brakes are applied, the circuit connects, and the tail lights automatically emit red light. Since brake lights are crucial for vehicle safety, their brightness is significantly higher than that of tail lights—typically more than five times brighter.

6

3

Share

Can the Air Conditioning Be Turned On When the Car Is Off?

You can turn on the air conditioning even when the car is off. Here are some additional details: 1. When the car is off, the air conditioning only blows natural air from the blower, as the air conditioning compressor is powered by the engine and stops working when the car is off. 2. The natural air blown by the blower is powered by the battery, and excessive use of the blower may drain the battery over time. 3. When the car is parked with the air conditioning on, the air exchange between the inside and outside is poor, which can lead to oxygen deprivation and health risks. The lack of proper air circulation in a stationary car, especially with the windows closed, can cause people to unknowingly fall asleep and suffer from oxygen deprivation or poisoning.

4

Share

What are the differences between domestic cars, imported cars, and joint-venture cars?

Here are the differences between domestic cars, imported cars, and joint-venture cars: Different definitions: Domestic cars are designed and manufactured by Chinese people and have independent intellectual property rights. Imported cars are a general term, which can be divided into American-spec cars, Chinese-spec cars, Middle East versions, European versions, etc. Joint-venture cars are projects jointly established by Chinese and foreign investors. Different design concepts: Domestic cars are generally independently researched, developed, and designed by the country. Joint-venture cars adopt foreign design concepts and technologies but are manufactured by domestic workers. Imported cars are entirely researched, developed, and built abroad. Different materials: Domestic cars mainly use domestically produced materials, while joint-venture cars and imported cars mostly use materials produced abroad.

13

2

Share

Main Uses of Turbine Oil No. 46

Turbine Oil No. 46 has the following main uses: 1. No. 46 turbine oil is a technical specification for turbine oil formulated by adding antioxidants and anti-wear agents to deeply refined base oil. 2. It is mainly suitable for various heavy-duty, high-power steam turbine generators, turbine compressors, turbine blowers, and other turbine-driven devices in the power industry, metallurgical industry, petrochemical industry, and shipping vessels, including the lubrication of turbine main bearings, transmission mechanisms, gears, and auxiliary devices. Here is some extended content: 1. Turbine oil is also known as turbine lubricating oil, usually including steam turbine oil, gas turbine oil, hydraulic turbine oil, and anti-oxidation turbine oil. 2. According to the functional characteristics of turbine oil, to ensure the safe and economical operation of turbine units, turbine oil must possess good oxidation stability, appropriate viscosity, excellent viscosity-temperature characteristics, and good demulsibility, among other features.

17

4

Share

What to do if you run a red light but it's already too late?

When the red light is on, if a vehicle crosses the stop line, moving from inside to outside the line, it constitutes a violation. However, there are different scenarios: If the vehicle crosses the stop line by a short distance without obstructing pedestrians or other vehicles, it is considered crossing the stop line but not running a red light. If the vehicle continues to move forward after crossing the stop line while the red light is on, it is considered running a red light. According to Article 2, Clause 1, Subclause 2 of the 'Scoring Standards for Road Traffic Violations,' driving a motor vehicle in violation of traffic signal lights results in a 6-point penalty. When traffic cameras capture red-light violations, they typically take three photos as evidence: the vehicle before crossing the stop line while the red light is on; the vehicle continuing to move forward and crossing the stop line; and the vehicle fully entering the intersection. These three photos clearly document the vehicle's movement during the red light. Article 38 of the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China' states: Motor vehicle and non-motor vehicle signal lights indicate: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct pedestrians or vehicles going straight. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. When the red light is on, right-turning vehicles may proceed if they do not obstruct pedestrians or other vehicles. Article 26 of the 'Road Traffic Safety Law of the People's Republic of China' states: Traffic signal lights consist of red, green, and yellow lights. Red indicates prohibition, green indicates permission, and yellow indicates caution. Article 90: Motor vehicle drivers who violate road traffic safety laws or regulations regarding road usage shall be given a warning or fined. Other provisions of this law shall apply where specified. Notes on parking: Do not leave the vehicle: Temporary roadside parking allows passengers to get on or off for 2-3 minutes without issue. Leaving the vehicle unattended, even if the engine is running, is usually considered illegal parking. Temporary parking is limited to 5 minutes: Even if there are temporary parking signs on the roadway, vehicles cannot park within yellow grid lines on either side of the road. Parking within yellow grid lines is explicitly prohibited by traffic regulations. No-parking zones: Parking is prohibited within 30 meters of bus stops, emergency stations, gas stations, fire hydrants, or fire stations, except when using these facilities. Parking is also prohibited within 50 meters of intersections, railway crossings, sharp curves, narrow roads, bridges, steep slopes, or tunnels.

14

0

Share

What does SEL mean on a car?

On a car, SEL stands for the menu selection confirmation button. It primarily controls functions such as tire pressure monitoring, odometer, trip meter, average speed, remaining range, elapsed driving time, and distance until the next maintenance service. Generally, a short press switches between items, while a long press resets the data. Other letters on the car dashboard represent the following: CLK for clock, MUTE for mute, AS for radio auto-storage, PS for radio preset station preview, BAND for switching radio frequency bands, MODE for switching audio modes, DISP for display content switching, SCAN for radio and disc song preview, and POWER for turning the system on/off.

15

0

Share

What is the reason for the 408 not starting and making abnormal noises?

What are Headlights, Position Lights, and Tail Lights?

Can the Air Conditioning Be Turned On When the Car Is Off?

What are the differences between domestic cars, imported cars, and joint-venture cars?

Main Uses of Turbine Oil No. 46

What to do if you run a red light but it's already too late?

What does SEL mean on a car?

What Does Rated Power of a Car Mean?

Where Can I Take the Racing Driver's License Test?

What does the sight distance on the dashboard mean?

What to Do If It Rains After Car Glazing?