What is the reason for Tesla still making noise after turning off?

1 Answers
MacDiana
07/29/25 8:22pm
Tesla still makes noise after turning off because the fan inside the car is still running to dissipate heat. The coolant temperature has not reached the required level: Most modern car radiator fans operate based on electronic temperature control. Generally, the fan starts running normally only when the coolant temperature inside the car reaches the required level. If the temperature is too low, the radiator fan cannot operate. Relay malfunction: If the relay malfunctions, the car's radiator fan may continue to operate. Thermostat switch issue: If the thermostat switch fails to close or malfunctions, it can also affect the operation of the car's radiator fan.
Was this review help?
20
1
Share
More Forum Discussions

How to Deal with Water Ingress in the Car Undercarriage?

When water enters the car undercarriage, the first step is to dry it out or drain it completely. Below are specific methods for handling water ingress in the car undercarriage: 1. Drainage Method: Choose to either dry the water out or drain it completely. 2. Rust Prevention Treatment: In reality, there is always a possibility of water entering the undercarriage, but the car is designed to drain water out on its own. If water accumulates, then the undercarriage needs to be cleaned. It is also important to check if the internal self-draining system of the undercarriage is functioning properly. If not, maintenance is required. 3. Coating Method: Apply a layer of waterproof coating directly onto the undercarriage. This effectively blocks external water from entering the undercarriage.
2
4
Share

What to do if the driver's license has not been renewed for 6 years?

Go to renew the license as soon as possible. If the driver's license has not been renewed for more than one year after its expiration date, it will be revoked. If the revoked driver's license has not exceeded 2 years, the driving qualification can be restored by passing the subject one exam, and the license can be renewed. If it has been revoked for more than two years, you will have to retake all the exams from scratch. The following is additional information: 1. Renewing an expired driver's license: The motor vehicle driver should apply for renewal at the vehicle management office of the place where the driver's license was issued within 90 days before the expiration of the motor vehicle driver's license; if the driver's license has not been renewed for more than one year after its expiration date, the motor vehicle driver's license will be revoked. 2. Materials required for renewing the driver's license: The original driver's license of the motor vehicle driver and the original ID card; three one-inch white-background color photos of the driver; a physical condition certificate, usually issued by a medical institution at or above the county level or a military regiment-level institution.
11
4
Share

What Causes Abnormal Noise in Car Engine Belts?

Introduction to the causes of abnormal noise in car engine belts is as follows: 1. Long squealing or screeching noise: This is usually due to improper installation of auxiliary devices or poor quality of original equipment. In this case, check the relevant components that may cause the fault, and inspect whether there is dirt on the surface of all pulley wheels. 2. Hissing, rattling, roaring, or humming noise: Continuous hissing or rattling noise that increases with engine speed usually indicates a lack of lubrication in the bearings of the auxiliary rotating mechanism. Using a stethoscope can help further identify these noises. Then remove the drive belt, manually rotate the suspected faulty components, and replace the bearings or the corresponding parts.
11
4
Share

What are the best tires for Honda Civic?

Honda Civic is best suited for PRIMACY LC (Bo Yue). Here is an introduction to the best tires for Honda Civic: 1. Advantages: Features include comfortable ride, low tire noise during driving, quietness, long mileage, and reduced fuel consumption. It is more suitable for daily use such as family and business purposes. 2. Installation recommendations: New tires should be installed on the rear axle of the vehicle. This is because if more worn tires are placed on the rear axle, the reduced tire drainage capability can significantly increase the risk of oversteering during rainy conditions, potentially leading to dangerous situations like vehicle fishtailing.
8
0
Share

What are the precautions for charging the Chery EQ?

Here are the precautions for charging the Chery EQ: 1. Before charging: Check the charging gun, charging socket insulator, pins, and socket holes for any foreign objects. If present, clean them using a high-pressure air gun or brush. 2. During charging: If encountering severe weather conditions during the charging process, charging must be stopped immediately; if the charging port continuously emits a strong, irritating odor during charging, stop charging immediately and investigate the cause; the fast-charging gun's electronic lock will automatically engage, preventing the fast-charging gun from being unplugged. To stop charging, follow the charging station's instructions to swipe the card and end the charging process.
8
5
Share

Why is the car's RPM so high?

Here is an analysis of the causes of high engine RPM: 1. Throttle failure: The throttle is a controllable valve that regulates the flow of air into the engine. After entering the intake manifold, the air mixes with fuel to form a combustible mixture for combustion. If the throttle malfunctions, causing it to open suddenly, the vehicle's RPM will rise abruptly. 2. Fuel pump and fuel system failure: Fuel injector leaks or blockages prevent the system from injecting fuel as instructed by the electronic control unit, resulting in a mixture that is either too rich or too lean, causing poor performance in individual cylinders and idle vibration. 3. High RPM is usually caused by excessive carbon deposits. It is necessary to clean the throttle and idle control valve promptly. 4. Air conditioning clutch failure: Manual transmissions, dual-clutch transmissions, and semi-automatic transmissions all use friction plate clutches to transmit engine power. If the clamping torque is insufficient or the friction plates are severely worn, slipping will occur, leading to high RPM without a corresponding increase in speed.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.