What is the reason for Tesla's automatic wipers continuously wiping?

1 Answers
Carolyn
07/29/25 4:45pm
Tesla's automatic wipers continuously wipe for the following reasons: Wiper fuse blown: If the motor's operating resistance is high, it is prone to overload and burn the fuse. You can remove the deceleration system to test whether the fuse still burns out. Also, check if there is excessive gear wear in the deceleration system. In both of these cases, the entire motor system needs to be replaced, as there are no separate motors or decelerators available for purchase. Wiper switch malfunction: If there are stains on the wiper blades or the glass surface, it can also cause the wiper to move slowly. If the voltage entering the permanent magnet motor is low, it may be due to poor line contact. Check the lines and the wiper lever for any poor contact.
Was this review help?
1
5
Share
More Forum Discussions

What causes slight wobbling and knocking sounds in the steering wheel?

It could be due to increased clearance between the steering rack and pinion gears, excessive play in the universal joint drive assembly, or issues with the shock absorber's pressure shaft. The solution is to apply some lubricating oil at the friction point between the steering column and steering wheel. Other scenarios of steering wheel noises: 1. Noise while driving: If the noise occurs during driving, the sound usually comes from the front suspension area outside the vehicle. 2. Sharp squeaking sound: This is likely caused by improper front wheel toe-in (either too large or too small), resulting in tire scrubbing noise when turning due to non-parallel wheel alignment. 3. Clicking or rattling sound: This indicates excessive wear in the vehicle's CV joint (constant velocity joint), which requires replacement.
14
5
Share

What is the top speed of the Qin Pro?

The top speed of the Qin Pro is 200 kilometers per hour. The Qin Pro is a model under BYD Company Limited, with body dimensions of 4765mm in length, 1837mm in width, and 1500mm in height, and a wheelbase of 2718mm. In terms of appearance, the Qin Pro adopts the Dragon Face design language, featuring a large-mouth-style grille paired with LED headlights resembling dragon whiskers, which adds a Chinese dragon-like aura and a strong sense of sportiness. The body design is relatively simple, with overall lines that give a sense of subtlety. Combined with the continuous tail light group lines, it presents a stable, neat, and generous appearance.
7
3
Share

How to Turn on the Air Conditioner's External Circulation?

There are several main steps to turn on the air conditioner's external circulation, which are: 1. Locate the button with a car symbol in the air conditioning control area. 2. The button with an arrow entering the car from outside is the one to activate external circulation. 3. Press this button to turn on the external circulation. Some cars do not have an external circulation button but only an internal circulation button. Typically, when the light on the internal circulation button is on, it indicates internal circulation; pressing it again to turn off the light switches to external circulation. Below is some additional information about internal and external circulation: Internal circulation keeps the original air inside the car circulating, isolating it from the outside air. Turning on internal circulation helps maintain warmth, and in summer, it cools the car faster. However, if you keep the windows closed and use internal circulation for a long time, the car will quickly fill with moisture from human respiration, and the oxygen level will decrease.
15
3
Share

How to eliminate the tire pressure warning on Audi Q5?

Audi Q5 tire pressure warning elimination steps are: 1. After turning on the ignition, press the multifunction button on the left side of the steering wheel to bring up the menu interface on the instrument panel; 2. Select the maintenance option, find the tire inflation pressure, and press the car button; 3. Choose the tire pressure monitoring system and continue to click to store the tire pressure. Extended content: The body dimensions of the Audi Q5 are: length 4629mm, width 1898mm, height 1655mm, wheelbase 2807mm, fuel tank capacity 75l, equipped with a 2.0t turbocharged engine and an 8-speed automatic manual transmission, maximum power is 169kw, maximum torque is 350nm.
7
1
Share

What tires does the Elantra use?

The Elantra uses Nexen tires. Nexen Tire has two subsidiaries in China, which are introduced as follows: 1. Qingdao Nexen Tire Co., Ltd., located in Jiangshan Town, Laixi City, Qingdao, Shandong Province, with a total investment of 500 million US dollars. 2. Shanghai Nexen Tire Sales Co., Ltd., established in January 2012 in Shanghai, is fully responsible for the RE and OE sales of Nexen tires in the Chinese market. Here is some additional information: The Elantra continues Hyundai's "Fluidic Sculpture" design concept, with the headlights combined with the smooth hood feature lines, presenting a dynamic and energetic image. The simple and unique side lines combined with the wild rear design create a more three-dimensional effect. The overall design style is developed based on the design concept inspired by natural phenomena like the wind.
6
4
Share

Where is the fuel filler switch located in the Sagitar?

The fuel filler button of the Sagitar is located on the passenger side. Here is more information about the latest Sagitar model: 1. Taking the 2021 Sagitar as an example, it is a compact car with body dimensions of length 4753mm, width 1800mm, height 1462mm, a wheelbase of 2731mm, a minimum ground clearance of 108mm, and a curb weight of 1355kg. 2. The 2021 Sagitar features a front MacPherson strut suspension and a rear multi-link independent suspension, with a front-wheel drive layout. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, a maximum torque of 175Nm, and a maximum power of 85kW, paired with a 5-speed manual transmission.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.