What is the reason for not being able to find the new driver's license file number?

Will touching the line during reverse parking in Subject 2 result in penalty points?

Touching the line means the vehicle body crosses the line, which results in a 100-point deduction and failure of the current test. Other actions that also result in a 100-point deduction include crossing the line, failing to enter the parking space, stopping midway, not following the prescribed route or sequence, and exceeding the time limit. The total score for both subjects is 100 points, with evaluation criteria set for failure, 20-point deduction, 10-point deduction, and 5-point deduction. The rules for the Subject 2 driving test state that any of the following actions will result in failure: stopping or rolling back midway, not following the voice prompts, wheels crossing the line, or the vehicle body touching the line. Many learners encounter line-crossing issues during Subject 2 practice, and "touching the line" is the most common reason for failure. The main cause of wheel line-crossing is not mastering the correct timing for steering. Besides missing the steering timing, another reason could be that the steering speed does not match the vehicle speed. Subject 2 penalty point standards: Not wearing a seatbelt: 100-point deduction. Starting the engine without the gear in neutral: 100-point deduction. Not using turn signals (including starting, lane changing, overtaking, turning, and parking); using turn signals for less than three seconds (this is easily overlooked!); forgetting to turn off turn signals or using them incorrectly: 10-point deduction. Stalling once: 10-point deduction. Reverse parking: Not following the prescribed route sequence: 100-point deduction. Vehicle body crossing the line: 100-point deduction. Failing to enter the parking space: 100-point deduction. Before reversing, not ensuring both front wheels pass the control line: 100-point deduction. Exceeding the 210-second time limit: 100-point deduction. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. Slope parking and starting: After stopping, if the front bumper is not aligned with the pole line and exceeds 50 cm: 100-point deduction. After stopping, if the front bumper is not aligned with the pole line but does not exceed 50 cm: 10-point deduction. After stopping, if the starting time exceeds 30 seconds: 100-point deduction. Wheels touching the road edge line while driving: 100-point deduction. Rolling back more than 30 cm when starting: 100-point deduction. After stopping, if the vehicle body is more than 50 cm from the road edge line: 100-point deduction. After parking, not tightening the parking brake: 10-point deduction per occurrence. After stopping, if the vehicle body is more than 30 cm but less than 50 cm from the road edge line: 10-point deduction per occurrence. Rolling back more than 10 cm but less than 30 cm when starting: 5-point deduction per occurrence. Parallel parking: After parking, if the vehicle body crosses the line: 100-point deduction. Not using or incorrectly using turn signals when entering the parking space: 10-point deduction. Exceeding the 90-second time limit: 100-point deduction. Touching the parking space edge line while driving: 10-point deduction per occurrence. Wheels touching the lane edge line while driving: 10-point deduction per occurrence. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. 90-degree turn: Wheels touching the road edge line: 100-point deduction. Not using or incorrectly using turn signals during the turn, or not turning them off after the turn: 10-point deduction. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. Curve driving: Wheels touching the road edge line: 100-point deduction. Stopping for more than 2 seconds midway: 100-point deduction. Not driving in second gear or higher: 5-point deduction.

11

0

Share

How to Cancel the Tire Pressure Warning?

Methods to cancel the tire pressure warning: After confirming that all tires are normal during inspection, you can use a decoder to clear the fault code; alternatively, turn on the ignition and press the reset button on the dashboard until the warning light on the instrument panel goes off. The tire pressure warning light will illuminate whenever there is a change in tire pressure, which could indicate a tire issue, excessive temperature, or even a sensor malfunction or false alarm. If the tire pressure warning light suddenly comes on while driving, remain calm, reduce speed immediately, avoid sharp steering and sudden braking, and pull over safely when possible. Those with a tire pressure monitoring tool can check if all tire pressures are normal, while those without one can inspect the tires manually after stopping.

13

4

Share

What are the reasons for the Jiangling Yusheng's failure to start?

Jiangling Yusheng's failure to start reasons: 1. Car key battery dead: If the car key battery is dead, the key and engine cannot sense each other when starting the car, so the car cannot start normally; 2. Car battery dead: If the car is not used for a long time, the battery is prone to power loss, resulting in the car's failure to start; 3. Starter failure: When the car's starter fails, the car naturally does not respond when starting; 4. Car steering wheel locked: If the steering wheel is turned when the car is turned off, the steering wheel will be locked, making it impossible to start the car again; 5. Car out of fuel: If the car's fuel level is too low, the engine lacks fuel to function properly, and the vehicle cannot start.

14

3

Share

What Causes Unstable Idle?

Reasons for unstable idle: 1. Idle switch not closing; 2. Faulty idle control valve; 3. Air intake manifold leakage; 4. Incorrect valve timing; 5. Fuel injector dripping or clogging. Troubleshooting methods: 1. Adjust, repair or replace the throttle position sensor; 2. Clean or replace the idle control valve, and use a special decoder to perform basic setting of idle speed; 3. Locate the leakage point, reseal or replace corresponding components; 4. Check timing marks and readjust valve timing according to standards; 5. Clean fuel injectors, inspect each injector's fuel delivery and confirm for any clogging or dripping.

16

3

Share

Will the car battery run out if the car is not driven for a month?

If a car is not driven for a month, the battery will not run out, but it is still recommended to disconnect the positive and negative terminals of the battery (to avoid natural power consumption of the car battery). For cars in poorer condition, the battery may already be depleted in about a week. As long as you drive normally for one to two hours, the battery can be restored to its normal power level. If the situation is severe to the point where the engine cannot be started, a jump start is needed to activate the generator. A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. The commonly referred-to car battery is a lead-acid battery, which is mainly made of lead and its oxides, with the electrolyte being a sulfuric acid solution.

19

1

Share

What is the horsepower of a 150cc motorcycle?

150cc motorcycles typically have a horsepower ranging from 10ps to 12ps. Horsepower refers to the engine's power output, which is a crucial performance parameter that measures how much work the engine can perform per unit of time. Generally, an engine with higher power output delivers stronger performance but also consumes more fuel. The power output is related to the engine's rotational speed (RPM) and torque. A 150cc motorcycle refers to a motorcycle with a displacement of 150 cubic centimeters. Typically, engines with larger displacement release more energy per unit of time. The volume swept by the piston moving from the top dead center to the bottom dead center is called the cylinder displacement. If an engine has multiple cylinders, the sum of all cylinders' working volumes is referred to as the engine displacement. Displacement is one of the most important structural parameters, more representative of engine size than bore diameter or the number of cylinders. Many engine specifications are closely related to displacement.

16

3

Share

What is the reason for not being able to find the new driver's license file number?

Will touching the line during reverse parking in Subject 2 result in penalty points?

How to Cancel the Tire Pressure Warning?

What are the reasons for the Jiangling Yusheng's failure to start?

What Causes Unstable Idle?

Will the car battery run out if the car is not driven for a month?

What is the horsepower of a 150cc motorcycle?

How to set the automatic locking for Ford Kuga?

Where is the fuel pump fuse located in a Golf?

What Causes Jerking When Releasing the Accelerator?

What is the calorific value of gasoline?