What is the reason for no sound when playing music via Bluetooth connection in Civic?

2 Answers
MadisonLynn
07/29/25 2:00am
Civic Bluetooth connection may have no sound if the media source is not set to Bluetooth audio. You can use the navigation keys to select the correct media source. The issue could also be due to incompatibility between the phone and Bluetooth music - try switching to another phone. Another possibility is that the song's format is not supported by the navigation system. The worst-case scenario would be a faulty Bluetooth module. More relevant information is as follows: 1. Civic offers high value for money: The Civic performs well in all aspects and offers excellent value. The appearance of the tenth-generation Civic is a major reason for its popularity, featuring a youthful and sporty design with a very dynamic fastback body shape that appeals to young consumers' aesthetics. 2. Civic's exterior design: The Civic has a delicate appearance with elegant body lines and beautiful waistlines that almost rival coupe styling. The two halogen headlights at the front are particularly lively. Compared to the Lamando, the lines and headlights are two of the Civic's more prominent advantages and characteristics.
Was this review help?
14
1
Share
HadleyAnn
08/12/25 6:02am
I frequently tinker with electronic devices and have encountered the issue of no sound when connecting via Bluetooth to my phone multiple times. Common causes of this problem in the Civic include several aspects: First, check if the phone volume is turned up, and ensure the car's system volume is also turned up. Selecting the wrong audio source is the easiest mistake to make—confirm on the car's infotainment system that Bluetooth is selected as the audio input. The most frustrating issue I've encountered is when the Bluetooth pairing appears connected but is actually disconnected; deleting the pairing and starting over can solve this. Software conflicts are also possible, such as the phone system freezing or the car's firmware being outdated—it's advisable to restart both or update the software. The Civic's system is stable, but as it ages, the Bluetooth module may malfunction and require professional repair. Don’t overlook interference from other devices; try turning off nearby wireless devices. If these simple steps don’t work, visit the dealership for diagnostics early to avoid affecting safe driving. Regularly keep the system updated to prevent issues from arising.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

What is the standard data for the intake air temperature sensor?

Under normal conditions, when the temperature is 20°C, the resistance value is approximately 2-3 kiloohms; at 80°C, the resistance value is about 0.4-0.7 kiloohms. If the measurement results do not meet the specified requirements, the sensor should be replaced. When the intake air temperature sensor installed inside the mass air flow sensor is damaged, the mass air flow sensor should be replaced. Below is additional information about the intake air temperature sensor: 1. Function: The intake air temperature sensor is essentially a negative temperature coefficient thermistor, whose role is to transmit the intake air temperature to the ECU in the form of a voltage signal, which the ECU can then use as a correction signal for fuel injection and ignition. 2. Location: The intake air temperature sensor is generally installed in the intake pipe or inside the mass air flow meter. 3. Damage hazards: When the engine's intake air temperature sensor is damaged, the ECU not only cannot accurately use it as a correction signal for fuel injection and ignition but may also receive incorrect information, leading to issues such as difficulty starting the engine, unstable idle speed, and increased tailpipe emissions pollution.
2
4
Share

Can I cancel after successfully scheduling the Subject 3 test?

Yes, you can cancel; Log in to the 122 platform to cancel the test before receiving the confirmation message. If the appointment has already been confirmed, bring your ID card to the vehicle management office at least one day before the test to cancel. Subject 3 road test content: 1. Preparation before starting: After confirming your identity, exit the vehicle and walk around it counterclockwise to observe the vehicle's condition and surrounding traffic, ensuring safety. 2. Starting off: Before starting, check if the doors are fully closed, adjust the seat and mirrors, and fasten the seatbelt. Observe the traffic behind through the mirrors, ensure safety, turn on the left turn signal, engage first gear, release the brake, and start off smoothly without jerking, rolling back, or stalling. 3. Light simulation test: Respond to voice prompts within 5 seconds with appropriate light operations. Use high beams on unlit or poorly lit roads; use low beams on well-lit roads, when meeting vehicles, turning at intersections, or following closely. Alternate between high and low beams when overtaking, passing sharp turns, slopes, arched bridges, crosswalks, or uncontrolled intersections. 4. Meeting vehicles: Control speed and maintain a safe distance when meeting other vehicles. 5. Going straight through intersections: Observe traffic, slow down in advance, use turn signals correctly, and adopt appropriate methods to pass intersections safely. 6. Passing crosswalks: Slow down to below 30km/h near crosswalks, school zones, and bus stops, and stop for pedestrians or students. 7. Making a U-turn: Slow down, choose a suitable spot, signal, and execute the turn. 8. Gear shifting: Shift gears smoothly according to speed without jerking. 9. Changing lanes: Signal in advance, check traffic via mirrors, and change lanes safely without affecting others. 10. Driving straight: Keep the vehicle straight with no more than 50cm deviation, checking mirrors periodically without looking away for over 2 seconds. 11. Overtaking: Observe left traffic via mirrors, signal, honk if safe, and pass from the left. 12. Pulling over: Slow down, signal right, observe traffic, and park smoothly within 30cm of the curb, applying the parking brake. Note: After stopping, the vehicle should be within 30cm of the right edge.
5
5
Share

Do You Need to Press the Clutch When Shifting Gears?

Shifting gears requires pressing the clutch, and it must be fully depressed. If not fully pressed, the car may produce abnormal noises or even cause the clutch to vibrate. During the gear engagement process, if the clutch is not fully depressed, there will be a significant speed difference between the shifting gear set and the transmission gear set, making smooth engagement difficult. In mild cases, this can accelerate wear, and in severe cases, it may lead to gear grinding, damaging the transmission. The purpose of pressing the clutch is to stop the engine's power from being transmitted to the transmission, used during starting and shifting. Pressing the clutch cuts off the power between the engine and the transmission, disconnecting the transmission from the engine. The driven components continue to rotate by inertia, causing all the gears in the transmission to rotate together.
15
5
Share

How to Activate the One-Touch Window Lift Function with the Kicks Car Key?

Method to activate the one-touch window lift function with the Kicks car key: 1. Before setting, start the engine, press the button for 5 seconds, then lift the button for 5 seconds, and the system will record it to successfully activate; 2. Pull the switch to the first position and hold it until the window moves to the desired position, then briefly pull the switch to the second position to enable the one-touch window lift function. The Kicks is a compact SUV under Dongfeng Nissan, with dimensions of 4295 mm in length, 1760 mm in width, and 1588 mm in height, and a wheelbase of 2620 mm. The Kicks features a family-style taillight design and a black plastic rear bumper. This car is equipped with an HR15 1.5L naturally aspirated engine, with a maximum power output of 90 kW.
4
1
Share

What's the reason when the car doesn't respond after inserting the key?

The reasons why the car doesn't respond after inserting the key: 1. The car battery is dead. In this case, you need to find an external power source to jump-start the car. If the car can start through jump-starting, it indicates that the issue is caused by a dead battery; 2. There is a problem with the car's ignition system. Check whether the live wire entering the ignition switch has power. If it has power, the ignition switch is normal. If there is no power, it means the ignition switch is faulty; 3. The car's steering wheel is locked. This situation can also cause no response after inserting the key. In this case, you need to place one hand on the steering wheel and use the other hand to turn the car key back and forth.
16
1
Share

Why is the engine cooling fan making an unusually loud noise?

It is normal for the engine cooling fan to make a particularly loud noise. When the temperature of the engine coolant rises, the noise from the cooling fan increases due to the higher rotational speed. Additionally, when the car's air conditioning is turned on during hot weather, the fan noise also becomes louder as it needs to dissipate heat from the condenser. The engine cooling fan is installed between the engine and the radiator. When the fan blades rotate, driven by the engine, they generate high-speed airflow, which carries away the heat from the coolant in the radiator, thereby achieving the purpose of cooling the engine. Engine cooling fans can be divided into two types: mechanical fans and electric fans. Mechanical fans are designed to reduce engine power loss and save fuel. Most engines use fan control devices to manage the engagement and disengagement of the cooling fan with the drive pulley. Electric fans, on the other hand, do not operate when the engine is at low temperatures; they start rotating only after the temperature rises, and they are driven by an electric motor.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.