What is the reason for no communication with the transmission control unit?

What does a reversible contraflow lane mean?

Reversible contraflow lane, also known as a contraflow left-turn lane. Simply put, it involves adjusting the traffic light sequence to allow vehicles making a left turn to use the adjacent opposing lane, effectively creating an additional left-turn lane to reduce traffic congestion. Here are the relevant details: 1. Function of reversible contraflow lanes: The primary purpose of setting up "reversible contraflow lanes" is to make full use of road resources at intersections. By adapting to the flow characteristics of traffic during different time periods, these lanes alter the path of vehicles, alleviating traffic pressure and improving efficiency. 2. Precautions when entering reversible contraflow lanes: When the signal light for the "reversible contraflow lane" turns red, all vehicles are prohibited from entering. Violators will be penalized by traffic authorities for running a red light, incurring 6 penalty points and a fine. If a traffic accident occurs, the violator will be held accountable. Only motor vehicles are permitted in "reversible contraflow lanes"; non-motorized vehicles and pedestrians are not allowed to enter.

15

1

Share

Can I Drive on the Highway During the Break-in Period of a New Car?

It is acceptable to drive on the highway during the break-in period of a new car. Here is relevant information: 1. Speed Control: Although the new car has undergone cold running-in, it has not been broken in through actual driving. Therefore, when driving on the highway, it is essential to control the speed, preferably keeping it below 100 km/h. Additionally, monitor the vehicle's operating time to avoid prolonged high-speed driving, and take breaks at service areas along the way. 2. Smooth Driving: Avoid sudden acceleration and emergency braking when driving on the highway. Emergency braking not only impacts the braking system but also affects the car's chassis and engine. Hence, strive to maintain steady driving and refrain from abrupt braking. Apply the brakes gently, preferably using a pumping method. 3. Proper Gear Usage: When driving on the highway, for manual transmission cars, use gears flexibly and avoid prolonged driving in low gears. For automatic transmission cars, make reasonable use of the S gear and manual mode.

8

4

Share

Is Kanapi genuine leather?

Kanapi is not genuine leather. Here are the specific details about Kanapi: 1. Kanapi, full name Toscana, originates from Italy. It is a high-end innovative fabric composed of ultra-fine seaweed fiber and camel wool fiber, forming a non-woven material widely used in premium car interiors, high-end clothing fabrics, luxury home decor, premium handbag materials, sports shoes, and other fields. 2. From the production of seaweed fiber and camel wool fiber fabrics to dyeing and finishing, every step employs the most advanced scientific technology, state-of-the-art production equipment, and strict, precise process management. It does not belong to any existing material category and is a unique, innovative fabric. 3. Due to its raw materials, manufacturing methods, and additional functionalities, Toscana products exhibit the following unique characteristics: a. Eco-friendliness – biodegradable and non-toxic. b. Safety – antibacterial, commonly used as sleepwear material. c. Comfort – emits far-infrared rays, promotes blood circulation, and enhances physical functions. d. Temperature regulation – warm in winter and cool in summer. e. Elk leather texture – embodies nobility, elegance, and comfort. f. Durability and abrasion resistance – lightweight yet high-strength, with excellent friction resistance. g. Superior moisture absorption – effectively reduces the growth of harmful bacteria.

14

2

Share

Can the brake and clutch be pressed together when downshifting?

They can be pressed together. However, when pressing them, you need to pay attention: the clutch pedal can be pressed directly to the bottom, but the brake pedal should be pressed gradually. Never press the brake pedal directly to the bottom, as this will cause the vehicle to lock up, which can have a certain impact on the vehicle's usage. Here are some related explanations: 1. Definition of braking: The brake of a motor vehicle is also called the deceleration device. 2. Principle of braking: The principle of braking is to fix a wheel or disc on the high-speed shaft of the machine and install a corresponding belt or disc on the machine. Under external force, it generates braking torque. 3. Explanation of the clutch: The clutch of a motor vehicle is located inside the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission.

6

2

Share

What is the operating procedure for an automatic transmission car?

Operating procedure for an automatic transmission car: 1. After the driver sits in the driver's seat, there is no need to press the brake pedal; simply press the start button once. 2. At this point, the ACC light will turn on. Press the button once more, and the vehicle will begin a self-check (for models equipped with a one-touch start function). 3. For mechanical key switches, turn the ignition key to the second position, to the ACC (Accessory) position, allowing the car's computer system to start self-checking for at least 6 seconds or more. 4. Press the brake pedal and then press the start button again to ignite and start the engine. 5. For mechanical keys, directly turn the ignition key to the ON position to start the engine. 6. Release the foot brake and let the car warm up in place for 1 to 3 minutes. 7. Turn on the turn signal, press the foot brake again, shift to D (Drive) gear, and release the handbrake (for electronic handbrakes, simply press the button). 8. Slowly release the foot brake, gently press the accelerator to start moving, and straighten the turn signal.

12

4

Share

How to Power Off a Car with One-Key Start?

Without pressing the brake, pressing the one-key start once will power off the car. When the car is stationary with the brake pressed and shifted into P gear, pressing the one-key start function will turn off the engine. Most cars nowadays are equipped with the one-key start function. Here are some related introductions: 1. Automatic Power-Off Function of One-Key Start: In fact, the original smart start system installed in the car has a protection system. If the engine is turned off for 10 minutes, the vehicle will automatically power off. This is mainly to prevent battery discharge, which could make it difficult to start the engine. 2. Other Functions of One-Key Start: Pressing the one-key start button without stepping on the brake can turn on some of the car's power sources. Pressing it twice in a row can turn on all the power sources in the car, allowing the car to enter the self-check procedure, and even the window lift function can be used. Additionally, the one-key start function can also open the trunk without the need to get out of the car.

9

1

Share

What is the reason for no communication with the transmission control unit?

What does a reversible contraflow lane mean?

Can I Drive on the Highway During the Break-in Period of a New Car?

Is Kanapi genuine leather?

Can the brake and clutch be pressed together when downshifting?

What is the operating procedure for an automatic transmission car?

How to Power Off a Car with One-Key Start?

How Long Should You Wait Before Turning Off the Engine After Jump-Starting?

How to Deal with Poor Visibility in Rearview Mirrors Due to Rain?

Where is the engine number of the Luzun?

What is the emission standard of the Baojun 510?