···
Log in / Register

What is the reason for frequent scratches on the window glass when rolling up and down?

1 Answers
StSilas
07/24/25 3:50pm

The reason for frequent scratches on the window glass when rolling up and down is: there is sand and dirt inside the window rubber seal, which causes friction when the glass moves. The solution is to replace the rubber seal or clean it. The maintenance methods for window glass are: 1. Use a soft cloth when cleaning the car; 2. Use more glass cleaner to wash the glass. The window is an important part of the entire car body, serving to meet the needs of interior lighting, ventilation, and visibility for the driver and passengers. Depending on the installation position, the glass is divided into: front and rear windshields, side windows, and door windows. The window structure is usually a curved and sealed type, with rubber sealing strips connecting the window frame and the glass on the car body.

Was this review help?
13
5
Share
More Forum Discussions

What engine is used in the JAC JY A5?

The specific model of the engine used in the JAC JY A5 is the HFC4GB2.4E. This engine adopts i-VVT technology and utilizes a multi-point electronic fuel injection system, with the engine block entirely made of aluminum alloy material. Below are some relevant details about the JAC JY A5: 1. The dimensions of this car are 4772mm in length, 1820mm in width, and 1492mm in height, with a wheelbase of 2760mm. 2. The JAC JY A5 is equipped with a 1.5-liter turbocharged engine across all variants, delivering a maximum horsepower of 150hp, a maximum power of 110kW, and a maximum torque of 210N·m. 3. In terms of transmission, the JAC JY A5 offers a choice between a 6-speed manual and a CVT continuously variable transmission.
10
4
Share

What Causes the Buzzing Sound When Accelerating the Engine?

Possible reasons for the buzzing sound when accelerating the engine include excessive carbon deposits, poor filtration, insufficient gasoline purity, aging spark plugs, engine issues, cylinder problems, and idle speed problems. Below are the solutions to address the buzzing sound when accelerating the engine: 1. For buzzing caused by excessive carbon deposits (such as in the engine, throttle body, or spark plugs), cleaning at a repair shop is required. 2. For buzzing caused by poor filtration, the most common issue is a dirty air filter, which can be cleaned or replaced at a repair shop. 3. For carbon deposits formed inside the engine due to insufficient gasoline purity (e.g., 90-octane gasoline being less pure than 93-octane), switching to a higher-octane gasoline is the solution. 4. For issues like aging spark plugs, engine problems, cylinder problems, or idle speed issues, engine repair at a professional shop is necessary.
14
4
Share

What is the Huansu S7?

The Huansu S7 is a mid-size SUV with dimensions of 4800mm in length, 1850mm in width, and 1770mm in height, and a wheelbase of 2780mm. The Huansu S7 is equipped with a 1.5-liter turbocharged engine across all variants, delivering 150 horsepower and a maximum torque of 220 Nm. This engine reaches its peak power output at 5500 rpm and achieves maximum torque between 1800 and 4000 rpm. More details are as follows: 1. The engine features dual variable valve timing (DVVT) and multi-point fuel injection technology, with an aluminum cylinder head and cast iron cylinder block. It is paired with either a 6-speed manual transmission or an 8-speed automatic transmission. 2. The Huansu S7 uses a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear. The multi-link independent suspension is an evolution of the double-wishbone design, replacing the two wishbones with individual links. This setup enhances wheel contact with the road surface, thereby improving traction.
18
1
Share

How to Clean the Car Air Conditioning Condenser?

Here are the methods for cleaning the car condenser: 1. Dilute the detergent with water. The cleaning product for the condenser mesh is alkaline and slightly corrosive to the condenser, so diluting it to reduce the concentration is important. Although a high concentration will clean thoroughly, the corrosiveness cannot be ignored. 2. Start the car and turn on the air conditioning to make the electric fan rotate. First, rinse with clean water and use the fan's rotation to spread the water evenly over the entire condenser. Ensure thorough rinsing. During this process, the electric fan may stop due to the condenser's temperature dropping too low. In this case, stop rinsing and let the condenser's temperature rise to restart the fan. 3. After the entire condenser is thoroughly wet, use a water-spraying tool (such as a watering can) to spray the diluted cleaning product onto the condenser's surface. The electric fan should still be running to help distribute the solution to all corners. Then, turn off the air conditioning and the engine. Observe the condenser's surface; after a few minutes, dirt will slowly 'float' up with small bubbles. Wait for a few more minutes. 4. Restart the air conditioning to make the fan rotate again. At this point, rinse thoroughly with a large amount of clean water. The more thorough the rinsing, the better. You will find the condenser's surface clean, often restoring it to a like-new condition.
10
3
Share

How to Evaluate the Quality of a Car Engine?

Here are methods to assess the quality of an engine: 1. Observe the engine speed. Generally, an engine speed between 2500 and 3000 RPM is considered ideal. At the same speed of 120 mph, more expensive cars tend to have lower engine speeds. For example, cars priced around 100,000 RMB typically have engine speeds around 2800 RPM, while cars priced at 300,000 RMB may see speeds drop to around 2400 RPM. If the engine speed exceeds 3000 RPM, you can noticeably feel that the car's noise is significantly louder than average. 2. Engine material affects quality: Aluminum has a lower density, making engines lighter. Cars equipped with aluminum engines are lighter, greatly enhancing power efficiency. The aluminum used is highly resistant to high temperatures and corrosion, offering better ventilation and heat dissipation. Aluminum's physical properties provide excellent ductility, making it more malleable than cast iron, allowing for more precise and refined processing. 3. Fuel consumption also reflects engine quality. Typically, engine displacement and fuel consumption are positively correlated, so powerful cars often earn the nickname 'gas guzzlers,' leading to the saying 'can afford to buy a car but can't afford to maintain it.' However, with advancing technology, the link between engine performance and fuel consumption is diminishing. Fuel economy has become a crucial parameter in evaluating a good engine.
12
4
Share

Where is the fuse box of the Mercedes-Benz V260?

The power take-off point is located inside the rearview mirror housing. Below is relevant information about the Mercedes-Benz V260: 1. Introduction: The Mercedes-Benz V-Class is a business vehicle under the Mercedes-Benz brand, equipped with a 2.0T engine to meet the needs of business reception. 2. Exterior: Features include a black solid three-pointed star logo, striking wing-shaped LED headlights, three-dimensional enhanced chrome components, and a new dynamic surround. The robust dynamic body complements the inherent boldness of business vehicles. The control panel section directly synchronizes with Mercedes-Benz's latest design language, featuring LCD screens, column-mounted gear shift design, and exquisite chrome decorations even on the air vents, all reflecting the quality enhancement of the Mercedes-Benz V series luxury business vehicles.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.