What is the reason for black smoke from the Geely King Kong exhaust pipe with an overly rich air-fuel mixture?

2 Answers
DelSadie
07/28/25 8:22pm
Black smoke from the Geely King Kong exhaust pipe is due to incomplete combustion of the air-fuel mixture. Black smoke occurs because of incomplete combustion of the air-fuel mixture: When there is insufficient air intake and excessive fuel, the engine's combustion process becomes incomplete. Gasoline does not burn completely, forming a large amount of carbon particles under high temperatures, which results in black smoke being emitted. The exhaust pipe can emit smoke of different colors: When starting the car in winter, due to the low external temperature, water vapor produced after engine combustion turns into white smoke when emitted. If the car has a malfunction, blue smoke appears when engine oil enters the combustion chamber and participates in the combustion process.
Was this review help?
7
3
Share
MacCalvin
08/12/25 1:10am
I've been repairing cars for over a decade and have encountered many Geely KingKong models emitting black smoke. Upon inspection, it's usually caused by an overly rich air-fuel mixture with excessive fuel combustion. The most common issues are fuel injector leaks or blockages. When they age, the fuel spray becomes uneven, and improper ECU control leads to excessive fuel and insufficient air. Another cause is a completely clogged air filter preventing proper air intake, disrupting the ratio and resulting in black smoke. A faulty oxygen sensor is also critical—it monitors exhaust oxygen levels, and incorrect data can mislead the ECU into injecting too much fuel. If the coolant temperature sensor malfunctions, the system may think the engine is cold-starting and increase fuel injection, which is another reason for smoke. I recommend owners first check their air filter and replace it if dirty. If that doesn't help, take it to a shop to read fault codes and inspect the injectors and sensors. Don't delay, as this can lead to skyrocketing fuel consumption or severe engine carbon buildup.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

How often should the brake fluid be replaced in a Cadillac CT6?

Cadillac CT6 brake fluid should be replaced every 2 years or 40,000 kilometers. The functions of brake fluid are: 1. Brake fluid has a very low freezing point, ensuring good fluidity in low-temperature conditions; 2. Brake fluid has an extremely high boiling point, preventing vapor lock in high-temperature conditions; 3. It does not cause corrosion to metal and rubber. The dimensions of the Cadillac CT6 are 5223 mm in length, 1879 mm in width, and 1492 mm in height, with a wheelbase of 3109 mm. The Cadillac CT6 is equipped with a 2.0T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 237 HP and a maximum power of 174 kW, paired with a 10-speed automatic transmission.
19
4
Share

Where is the OBD interface located on the Geely Vision X6?

The OBD interface of the Geely Vision X6 is located below the steering wheel and above the clutch pedal. The function of the OBD interface is to detect the working conditions of the engine's electronic control system, vehicle functional modules, and exhaust treatment system during vehicle operation. When a fault occurs in any system of the vehicle or the exhaust exceeds the standard, the fault light will issue an alert. The Geely Vision X6 is a compact SUV with the following dimensions: length 4546mm, width 1834mm, height 1715mm, wheelbase 2661mm, and a fuel tank capacity of 55 liters. The Geely Vision X6 is equipped with a 1.4T turbocharged engine, delivering a maximum power of 104kW and a maximum torque of 235Nm.
10
3
Share

How to Add Windshield Washer Fluid to a Golf?

To add windshield washer fluid to a Golf, follow these steps: First, open the engine hood. On the left side of the engine near the headlight, you will find a blue cap, which is the windshield washer fluid reservoir. Open the sealed cap and pour in the windshield washer fluid until the fluid level is visible, indicating that the filling is complete. The Golf is a compact car produced by FAW-Volkswagen, with body dimensions of 4296mm in length, 1788mm in width, and 1471mm in height, and a wheelbase of 2636mm. The Golf is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116PS and a maximum power output of 85kW, with a maximum power speed of 5000rpm. It is paired with a 7-speed dual-clutch transmission.
4
1
Share

How to Open the Hood of a CR-V?

To open the hood of a CR-V: The switch is located on the lower left side of the steering wheel, near the clutch or the left footrest area on the door's side panel. The upward-facing switch corresponds to the fuel tank cap, while the side switch is for the engine hood. Simply pull this switch to open. The CR-V is a compact SUV with dimensions of 4621mm in length, 1855mm in width, and 1679mm in height, featuring a 2661mm wheelbase and a 53L fuel tank capacity. For suspension, this model employs a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear.
20
2
Share

What is the battery model for the Corolla remote?

Corolla remote battery model is CR2032. Remote Key Introduction: The remote key utilizes the wireless remote function of the central locking system, allowing you to remotely open and lock doors without inserting the key into the lock cylinder. The main function of a car remote key is to remotely control the locking and unlocking of car doors. Remote Key Working Principle: In simple terms, the working principle involves the key emitting a weak radio wave, which is received by the car's antenna. The electronic control unit then identifies the signal code, and the system's actuator (motor or electromagnetic coil) performs the locking/unlocking action.
9
1
Share

What does the 't' in vehicles mean?

The 't' in vehicles stands for Turbo, which is short for turbocharging. It refers to an engine equipped with a turbocharging device that alters the air intake volume, allowing for more complete combustion of fuel in the cylinders, thereby increasing the engine's output power. The maintenance methods for turbocharged engines include: 1. Avoid pressing the accelerator pedal sharply after starting the engine; 2. Do not turn off the engine immediately after prolonged high-speed operation. Turbocharging is a type of air compressor that increases air intake by compressing air. It utilizes the inertial force of exhaust gases expelled by the engine to drive the turbine in the turbocharger, which in turn drives the coaxial impeller. The impeller then pressurizes the air delivered from the air filter pipe, forcing it into the cylinders under increased pressure.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.