What is the reason for always hitting the right corner when reversing into the garage?

3 Answers
MacKeegan
07/24/25 5:48pm
When reversing into the garage on the right side and always hitting the right corner, the reason is turning the steering wheel to the right too early during the reversing process. Normally, you should quickly turn the steering wheel to the right when the lower edge of the side mirror reaches the parking line, which is the so-called reference point for turning right when reversing into the garage. However, due to factors such as vehicle speed, distance from the side line when parking, and the speed of turning the steering wheel, it is not possible to perfectly reverse into the garage every time by turning the steering wheel at the reference point. Here is additional information: 1. Turning right too early when reversing into the garage can be anticipated and corrected. 2. Observe the position between the car body and the right corner of the garage: When reversing into the garage and turning right too early, you can observe the position between the car body and the right corner of the garage. Normally, the distance between the car body and the right corner should be maintained at 30 centimeters to ensure that the distance between the car body and the side lines on both sides is approximately equal. If the steering wheel is turned too early, the distance between the car body and the right corner will be less than 30 centimeters, or even close to hitting the right corner. The standard width of the garage line is 15 centimeters, so in the side mirror, when the distance between the car body and the garage corner is about twice the width of the side line, it is approximately 30 centimeters.
Was this review help?
19
5
Share
VonCamille
08/10/25 8:18am
After driving for so many years, I've noticed that hitting the right corner when backing into a right-side parking space is quite common, mainly because the steering wheel isn't turned in time. Many people wait until the rear of the car starts moving before turning the wheel, but by then, the optimal steering angle has already passed, making it easy for the car to scrape the corner. I recommend first stopping in a parallel position, about 1 meter away from the parking line, to allow more space for reversing. The key is to keep an eye on the corner with the right rearview mirror and turn the wheel fully as soon as you see it align with the wheel. Speed control is also crucial—too slow and your sense of direction blurs, too fast and corrections become difficult. With more practice, you'll realize how much the vehicle's turning radius affects the maneuver, requiring adjustments for different cars. Be confident but not hasty when reversing; experience will come with time.
Was this review help?
19
0
Share
Expand All
ElizaFitz
09/26/25 2:37am
We novice drivers often struggle with hitting the corner when reversing into the right parking space. After some thought, I realized the main issue is incorrect reference points. The rearview mirrors have blind spots, and relying solely on them can make us overlook the actual distance and vehicle angle. Initially, I kept focusing on the corner in the mirror without noticing the overall vehicle deviation, leading to steering too early or too late and hitting the corner. Another problem is improper initial parking position—being too far to the right leaves insufficient turning space. The solution is to glance back to visually confirm the position and adjust based on the rearview mirror data. Reverse slowly and steadily to allow time for correcting deviations. After a few practices, combining ground markings and steering wheel timing will help form better habits.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

What is the body length of the Mercedes-Benz GLK?

The body length of the Mercedes-Benz GLK is 4556mm. Exterior Design: The GLK's front features a large grille combined with the lines of the front bumper, creating a bold 'big mouth' impression. However, the horizontally extended grille pushes the oversized triangular star emblem to the forefront of the vehicle. The GLK is characterized by sharp, straight lines throughout, with no obvious curves to complement them. Interior Design: The interior follows a predominantly straight-line theme, accented with metal panels, achieving a good balance between technological and sporty feels. The color scheme of dark upper and light lower sections adds a touch of warmth to the dynamic interior. Many aspects of the style and design are inspired by the C-Class sedan. Powertrain Configuration: It is equipped with two engine options: 3.0L and 3.5L. The entry-level GLK300 features a V6 engine, the same power source as the C280 model, delivering a maximum power of 170kW and a maximum torque of 300N·m. During normal use, the 7-speed manual/automatic 7G-tronic transmission manages the power output, keeping the engine speed rarely exceeding 3000r/min. However, when rapid acceleration is needed for overtaking, the transmission will downshift several gears for an instant boost.
12
1
Share

How Many Cylinders Does the Baojun 310 1.2L Engine Have?

Baojun 310 1.2L is a three-cylinder engine. Working process of a three-cylinder engine: All engines rely on the expansion of gas from the combustion of the air-fuel mixture in the cylinders to push the pistons in reciprocating motion. This reciprocating motion generates an up-and-down movement, which drives the rotation of the crankshaft through the special construction of the piston connecting rod and the engine crankshaft. The crankshaft is fixed and rotates, so the rotation brings centrifugal force, leading to the emergence of centrifugal inertia force, ultimately causing vibration. In addition, the original up-and-down reciprocating motion of the pistons also generates vibration. Engine introduction: It is equipped with a 1.2L naturally aspirated engine with a maximum power of 82Ps and a peak torque of 116Nm. A 5-speed manual transmission is provided. Baojun Auto will produce a 1.0L turbocharged engine at Wuling Liuji Power, and this engine will be installed in the Baojun 310 model in the future.
13
0
Share

What is the safe following distance when driving 100 km/h on the highway?

When driving at 100 km/h on the highway, maintain a following distance of at least 100 meters from the vehicle ahead, with a lateral distance of at least 1.5 meters. When the speed is below 100 km/h, the following distance can be appropriately reduced, but the minimum distance should not be less than 50 meters, and the lateral distance should be at least 1.2 meters. During prolonged high-speed driving, the driver's vision is continuously stimulated by the road and surrounding moving scenery, leading to a gradual decline in depth perception, which can result in misjudgment of distances. Additionally, the elevated driving position in large vehicles shortens the forward visual distance for the driver, making it easy to underestimate speed and maintain insufficient distance from the vehicle ahead. Other precautions for highway driving are as follows: Choice of lanes at toll stations: There are two types of lanes—ETC lanes and regular lanes. ETC involves a bank card and reader mounted on the windshield. If you haven’t set up ETC with your bank, use the regular lane to take a ticket. If you accidentally enter an ETC lane, reverse out safely, as ETC lanes provide sufficient waiting distance for reversing. Ramp driving: On ramps, maintain a speed below 40 km/h and avoid overtaking, making U-turns, stopping, or reversing. Acceleration lane: Quickly increase your speed and merge left into the main traffic lane. When merging, yield appropriately, use turn signals, honk, observe, and ensure you do not disrupt other vehicles before entering the highway. Light usage: Use lights appropriately on the highway. At night, high beams can be used when maintaining a sufficient distance (over 150 meters) from the vehicle ahead. Speed over steering: Choosing to change lanes instead of slowing down can easily lead to loss of vehicle control. Avoid fatigue driving: Fatigue reduces reaction time. A one-second delay means the vehicle travels an additional 33 meters. If fatigued, rest at the next service area to prevent major accidents. Pay attention to road signs: Highway signs provide advance notice of road conditions, allowing drivers to prepare adequately. They also guide directions to avoid wrong turns.
2
5
Share

What is the fuel tank capacity of the 2013 Volkswagen Bora?

The 2013 Bora model has a total of 8 variants, with a fuel tank capacity of 55 liters. It comes with 2 engine displacements: 1.4T and 1.6L, and offers 3 transmission options: dual-clutch, manual, and automatic. The engine has a maximum power output of 96.0 kW, maximum horsepower of 131 PS, and maximum torque of 220.0 N·m. The vehicle dimensions are 4523 × 1775 × 1467 mm (length × width × height). For comparison, the 2020 and 2021 Bora models have a fuel tank capacity of 50 liters, while the 2019 Bora model has a capacity of 55 liters. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety level. There is additional space from the safety level to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E (empty) and F (full). When the needle is close to E, it indicates low fuel, while nearing F means the tank is nearly full.
4
2
Share

What format does the Mercedes ML350 USB drive support?

The Mercedes GLC USB drive supports MP3 and WAV format songs, with WAV format supporting lossless music. Functions of the USB interface: The USB interface is a type of in-car transmission cable that offers advantages such as fast transmission speed, ease of use, support for hot-swapping, flexible connectivity, and independent power supply. It is generally a universal interface for plugging in USB devices like USB drives and MP3 players. The main purpose of the USB interface in cars is to utilize the vehicle's standard power supply, using USB as the interface to charge DC-5V electrical devices or serve as a fixed power supply interface for electrical appliances. The USB interface in cars can be used to plug in USB drives for playing music, charge mobile phones and MP3 players, serve as a USB car cigarette lighter interface, function as an interface for radar detectors and dash cams, and charge computers and tablets. Precautions for using the USB interface: Charging should only be done when the car's engine is running to avoid damage to electrical devices due to unstable power supply. Avoid connecting too many electrical devices to prevent overloading and damaging the car battery and alternator. Do not use the USB interface during thunderstorms to avoid lightning strike accidents. Avoid using the USB interface in humid environments, as rust or water stains may prevent the USB drive from connecting properly.
17
0
Share

Will Insurance Still Cover After an Accident If the Driver's License Expired Without Renewal?

The insurance company cannot exempt itself from liability for compensation in the event of a traffic accident if the driver's license has expired. The reasons are as follows: If the license holder fails to apply for renewal and the license exceeds its validity period, the license will be renewed after legal penalties are imposed. If the driver fails to complete the renewal procedures on time, the driver's license is not necessarily revoked, and the renewal procedures can still be completed after accepting penalties from the public security department. Although failing to renew the license in time after its expiration constitutes a certain fault, the responsibility for this fault is administrative. After accepting administrative penalties, the license can be renewed. Failure to renew the license on time does not mean the driving qualification is immediately lost. The term "driver without a valid driving qualification" in the circumstances where compulsory traffic insurance does not cover should be narrowly interpreted. That is, it refers to drivers who have never obtained a driving qualification, excluding those who have obtained a driving qualification but delayed renewing their license and need to complete renewal procedures. A driver's license is a qualification certificate issued by the traffic police department to prove that the driver is capable of driving a vehicle. As long as the driver has obtained a license and it has not been revoked or canceled by the traffic police department, the driver has a legal driving qualification. Penalties for expired driver's licenses: Driving a motor vehicle during the expired period is not allowed and may be treated as driving without a license. If the driver's license has been expired for less than one year, the driver can renew it at any time, but driving on the road will result in a fine of 200 yuan. If the license has been expired for more than one year without renewal, the traffic management department will cancel it according to the law. If the expiration period is less than three years, the driver must retake and pass the subject one exam to restore the driving qualification. Driving on the road during this period will result in a fine ranging from 200 to 2,000 yuan. If the driver's license has been expired for more than three years, it will be completely canceled. The driver must retake the driver's license test to drive again. Otherwise, driving on the road will be treated as driving without a license, resulting in a fine of 2,000 yuan and administrative detention for up to 15 days.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.