What is the reason for all the windows of the Brilliance Junjie malfunctioning?
1 Answers
Brilliance Junjie windows all malfunctioning is mostly due to program disconnection, and restoring the initial program can solve the problem. Here are the recovery measures: 1. Initialize the windows: Turn on the ignition switch, pull the switch up and hold it, after the glass rises to the top, continue to hold for more than 3 seconds, release the switch and immediately press and hold it again to lower the glass to the bottom and wait for more than 3 seconds, then repeat the rising action once more. The initialization program is completed, and the window lifting function is restored; 2. Remove dirt: Wrap chopsticks with wet wipes and insert them into the glass guide slot. Adjust the number of towel layers wrapped around the chopsticks according to the width of the guide slot to ensure moderate thickness. Use force to move up and down inside the guide slot for cleaning, and continuously remove the towel for cleaning until no dirt comes out; 3. Apply lubricant or replace the rubber strip: Most cases of windows not lifting are caused by mechanical jamming. After cleaning the guide rail, applying some lubricating oil will suffice. If the malfunction is caused by aging or deformation of the glass rubber strip, then a new sealing strip needs to be replaced. If the sealing strip is too dirty, simply clean it. Spray some dashboard wax on the glass sealing strip, or apply talcum powder (to lubricate), and it will take effect.
