···
Log in / Register

What is the reason for abnormal noise in Accord cars?

3 Answers
VonEva
09/08/25 5:30am
Abnormal noise in Accord cars is caused by poor valve lubrication or excessive clearance. When the engine is running, listen carefully to the noise to identify its location. Try inserting a feeler gauge into the valve clearance. If the noise decreases or disappears, it indicates excessive valve clearance. In this case, the valve clearance should be adjusted as needed. During adjustment, the influence of temperature should be considered, as the temperature of the valve rocker arm and valve stem affects the valve clearance. When the engine is hot, the valve clearance is smaller than when the engine is cold. Some cars require adjustment when the engine is cold, while others can be adjusted when hot, with different clearance values. The adjusted valve should be fully closed to ensure the accuracy of the adjusted clearance value. The valve clearance of each cylinder should be adjusted consistently to avoid engine imbalance during operation. If the valve is poorly lubricated, it can cause wear and pits. In severe cases, the end of the valve stem may get stuck in the pit, and the rocker arm may break. Therefore, repairs or replacement of new parts should be carried out based on the wear condition to avoid affecting adjustment accuracy.
Was this review help?
2
4
Share
ColeAnn
09/20/25 4:09am
I used to drive an Accord that also had strange noises, so I’ll share some personal experience. The most common issue is aging suspension components—worn shock absorber rubber bushings can cause constant thumping noises over speed bumps. Another culprit is a loose engine belt, which squeals during cold starts and really ruins your music-listening experience. Worn brake pads can also produce sharp screeching, especially when braking. Additionally, unbalanced or unevenly worn tires create a buzzing noise at high speeds, like a fly circling your head. My advice: don’t ignore these sounds—get them checked promptly. I once fixed minor issues just by tightening a few chassis bolts, avoiding costly major repairs down the road.
Was this review help?
16
5
Share
Expand All
McLiam
11/03/25 4:32am
Diagnosing abnormal noises requires some skill, and identifying the source is the most reliable method. A knocking sound from the suspension area is likely due to loose ball joints or control arms; a humming noise from the tires suggests imbalance, which can be improved with a wheel alignment. Engine noises like clicking may indicate excessive valve clearance or insufficient belt tension; squeaking from the brake system means the pads are worn. The Accord's CVT transmission normally makes a rattling sound at low speeds, but if the frequency increases, it's time to be cautious. Checking is simple: find a quiet place to drive slowly and locate the source of the noise by listening carefully, avoiding unnecessary part replacements and wasted money.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

Can Wheel Alignment Solve Tire Wear Issues?

Tire wear issues can be resolved through wheel alignment. If a vehicle experiences uneven tire wear, also known as tire scrubbing, it indicates an abnormality in the wheel alignment, as under normal circumstances, tire wear should be uniform. Below is some additional information about wheel alignment: 1. Generally, after replacing or repairing components such as shock absorbers or steering systems, a wheel alignment is necessary. 2. Wheel alignment involves adjusting the geometric angles of the tires relative to the steering and suspension systems to ensure proper contact between the tires and the road surface. Additional Information: Wheel alignment adjustments include parameters such as camber angle, caster angle, toe angle, and kingpin inclination angle. The process can vary in duration due to the complexity and differences in each vehicle's alignment requirements.
13
5
Share

What RPM Should a Manual Transmission Maintain?

Manual transmission RPM should be maintained between 1500 and 3000. After starting, when the speed reaches 20 km/h, which corresponds to an RPM between 1500 and 2000, shift to 2nd gear. When the speed reaches 30 km/h, meaning the RPM exceeds 2000, shift to 3rd gear. When the speed reaches 50 km/h, which is when the RPM reaches 3000, shift to 4th gear. Below is some relevant information about manual transmissions: 1. A manual transmission is a type of transmission where the driver manually shifts gears by moving the gear lever to change the gear engagement inside the transmission, altering the gear ratio to achieve the desired speed. 2. The working principle of a manual transmission involves using the shift fork to change the gear ratio or tooth ratio of the meshing gears, thereby altering the driving torque to suit different operating conditions.
8
5
Share

Why does the motorcycle sound muffled after warming up?

Motorcycle sounding muffled after warming up is mainly caused by the following two reasons: 1. Generally, pushrod engines are more prone to this situation. Pushrod engines use rigid pushrods to drive the valve rocker arms. Since the valve clearance is adjusted when the engine is cold and set as the standard, and components such as the engine cylinder block, cylinder head, pushrods, rocker arms, and camshaft are made of different materials, their expansion rates vary when heated. Therefore, the valve clearance in pushrod engines automatically increases slightly when the engine is warm, which can easily lead to valve noise. 2. When the engine is hot, the temperature rises, and the engine oil temperature also becomes very high. At high temperatures, the viscosity of the oil decreases, making the oil film thinner and reducing lubrication effectiveness. Additionally, the internal clearances of engine components change when the engine is hot, which can result in increased noise.
6
4
Share

How to Connect Phone Screen Mirroring Function for BMW 740?

For BMW 740 phone screen mirroring, you can connect via data cable by matching the Bluetooth with the car system, or directly use WiFi for screen mirroring. Using a phone data cable for BMW screen mirroring: Insert one end of the data cable into your phone and the other end into the car's USB port. Then, enable the necessary permissions in your phone's settings. Both the car display and phone screen will show a successful connection prompt. If the connection fails, go to the developer options in your phone's settings, click on USB debugging, and try connecting again. Using WiFi for BMW screen mirroring: WiFi connection is simpler. First, download the Carlife app on your phone. Then, open the app on your phone and connect it with the Carlife on the car's central control display. Once the connection is successful, both the phone and car display will show a prompt, and you can start using the screen mirroring function.
10
3
Share

What is the sequence of pressing the clutch, shifting gears, and ignition when starting a car?

When starting a car, the main sequence is to first press the clutch pedal all the way down, then ignite the engine, and finally shift into gear. Starting precautions: 1. Get in the car, fasten the seat belt, adjust the seat, and quickly press the clutch pedal all the way down. 2. Shift into first gear, turn on the left turn signal, check the surroundings, release the handbrake, and quickly lift the clutch pedal to the semi-engagement position with a slight pause. 3. Slowly lift the clutch pedal while gently pressing the accelerator pedal to allow the car to start smoothly. Additional tips: 1. If the engine sound becomes lower, promptly press the accelerator or release the parking brake pedal; if the engine sound becomes higher, promptly reduce the accelerator or lift the clutch pedal. 2. Clutch release technique: Observe the car's movement state. If the vehicle shows signs of shaking, release the brake at this moment, and the car will start slowly; if releasing the brake causes the car to roll, promptly press the brake pedal.
15
5
Share

What is the difference between Tiptronic and Dual Clutch?

The differences between Tiptronic and Dual Clutch are as follows: 1. In terms of fuel economy: The dual-clutch transmission is equivalent to two automatic clutches, which is generally more fuel-efficient. 2. For power performance: Tiptronic is developed based on traditional automatic transmissions, with relatively slower response speeds overall. Due to engine protection considerations, its power performance is relatively weaker. Other differences are as follows: 1. In terms of cost: Tiptronic is generally used in some mid-to-high-end cars, with relatively faster gear shifting. Dual-clutch transmissions are usually used in some high-end models and sports cars, with very expensive components, making Tiptronic slightly better in terms of cost. 2. In terms of driving pleasure: Tiptronic is generally more inclined towards automatic transmissions, while dual-clutch transmissions are more inclined towards manual transmissions, offering better overall driving pleasure.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.