What is the reason for a motorcycle jerking when accelerating?

What is the size of a motorcycle oil drain plug?

In general, the size of a motorcycle oil drain plug is 17. Motorcycles typically use gasoline. Taking 98-octane gasoline as an example, here is a detailed introduction about 98-octane gasoline: Overview: 98-octane gasoline refers to gasoline whose octane rating is equivalent to a mixture of 98% isooctane and 2% n-heptane. The advantages of 98-octane gasoline are "two highs and two lows," namely higher anti-knock performance and power output, while the harmful substances in the gasoline and tailpipe pollution are lower. Advantages: Compared to other grades of gasoline, the advantages of 98-octane gasoline are mainly reflected in "two highs and two lows": higher anti-knock performance and power output, with reduced harmful substances in gasoline and lower tailpipe pollution. Using higher-grade gasoline can achieve greater engine power and smaller displacement, improving both performance and fuel economy.

16

2

Share

Are There Manual Transmission New Energy Vehicles?

Pure electric new energy vehicles do not have manual transmissions, only automatic transmissions, which are continuously variable. Hybrid new energy vehicles, however, come in both manual and automatic transmissions. Below is additional information: Pure Electric Vehicles: These are vehicles that use a single battery as the energy storage power source. They utilize the battery to store energy, providing power to the electric motor, which drives the vehicle. Deceleration is not achieved through a gearbox clutch but rather functions similarly to a continuously variable transmission. Hybrid Vehicles: These are vehicles whose propulsion systems consist of two or more individual drive systems that can operate simultaneously. The vehicle's driving power is provided by either one drive system alone or multiple systems together, depending on the actual driving conditions. Due to differences in components, layout, and control strategies, hybrid vehicles come in various forms.

18

0

Share

What does it mean when an OBD fault causes torque limitation?

OBD system continuously monitors the engine's operating conditions to check if the vehicle's exhaust exceeds the standard. If it does, a warning will be issued immediately. Here are the specific details about the OBD system: 1. Introduction: OBD stands for On-Board Diagnostics, which is a detection system extended for automotive fault diagnosis. 2. Working principle: The OBD system continuously monitors the engine's operating conditions to check if the vehicle's exhaust exceeds the standard. If it does, a warning will be issued immediately. When a fault occurs in the system, the Malfunction Indicator Lamp (MIL) or Check Engine warning light will illuminate, and the Powertrain Control Module (PCM) will store the fault information in memory. The fault code can be read from the PCM through a specific procedure. Based on the fault code, maintenance personnel can quickly and accurately determine the nature and location of the fault. 3. Scope of monitoring: The OBD system monitors the engine, catalytic converter, particulate trap, oxygen sensor, emission control system, fuel system, EGR system, and other components in real-time. It then connects to the ECU through various emission-related component information.

4

5

Share

Can Regular Cars Park in New Energy Vehicle Parking Spaces?

Regular cars cannot park in new energy vehicle parking spaces. These spaces are exclusively for new energy vehicles, and non-new energy vehicles parked in them will face corresponding point deductions and fines. In some cities, even new energy vehicles are not allowed to park in these dedicated spaces if they are not charging. New energy vehicle parking spaces, also known as charging spaces, are equipped with charging piles to facilitate the charging process and must ensure no flammable materials are nearby. When purchasing a parking space, the size of the vehicle should determine the space area, and the layout of the parking space should also be considered for convenient parking and travel. Unlike regular parking spaces, new energy vehicle spaces are special and must not be occupied. They should be clearly marked with signage to avoid confusion with regular parking spaces for fuel-powered vehicles, preventing misuse by regular cars.

16

0

Share

What to Do If the ETC Tag Has Been Removed?

If the ETC shows as 'removed', it means your electronic tag has become loose or detached. You need to revisit the original service point or any ETC service center on the highway to have it reinstalled. Once activated, it will be ready for use. ETC Installation Process: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU. A red light will briefly illuminate, and the OLED screen will display 'Tag Invalid' or 'Please Insert Card', indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield. The chip should be inserted into the OBU device. ETC Activation Method: Insert and remove the ETC card twice in succession until the electronic tag screen displays 'Bluetooth On'. If 'Tag Invalid' appears when inserting and removing the card twice without the electronic tag attached, this is normal and does not affect activation. Alternatively, you can press the button on top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth and open the corresponding mobile app (usually a download QR code is provided on the electronic tag). Navigate to the device activation interface. Click 'Connect Device' and wait patiently for the 'Connection Successful' prompt. Once connected, upload a photo of the vehicle's front to complete the activation.

7

3

Share

Is the fuel consumption of a new car higher?

New cars do have higher fuel consumption. The reasons for the higher fuel consumption in new cars are as follows: Reasons: During the break-in period, the friction between large mechanical components of the car is greater, requiring more power to overcome this friction, which results in higher fuel consumption. Bad habits: Improper control of brake and accelerator pedal pressure, sudden acceleration and braking during driving, maintaining a single gear for a long time or driving at low speeds for extended periods. All vehicles experience higher actual load when driving at low speeds compared to medium speeds, which also affects fuel consumption. Objective factors: Frequent starting and braking in traffic jams increases fuel consumption; at high speeds, opening the sunroof or side windows significantly increases wind resistance. Greater resistance requires more power, and the amount of power directly relates to fuel consumption.

4

Share

What is the reason for a motorcycle jerking when accelerating?

What is the size of a motorcycle oil drain plug?

Are There Manual Transmission New Energy Vehicles?

What does it mean when an OBD fault causes torque limitation?

Can Regular Cars Park in New Energy Vehicle Parking Spaces?

What to Do If the ETC Tag Has Been Removed?

Is the fuel consumption of a new car higher?

Can a motorcycle shop help with license plate registration?

What are the interior space dimensions of the Odyssey?

Do New Cars Consume More Fuel?

What is the fuel consumption of the Santana Classic?