What is the Rearview Mirror Parking Assist Function?

1 Answers
ZacharyLee
07/29/25 6:57pm
The rearview mirror parking assist system intuitively informs the driver of the relative position between the vehicle and obstacles through images and sounds, eliminating the blind spots caused by rearview mirrors. This provides convenience for drivers during parking and reversing, while also enhancing safety. Operating Principle: The reversing camera system utilizes visual measurement-based rearview technology. It relies on a rear-mounted camera to display road conditions behind the vehicle on the central display screen. The driver can freely move a square representing the vehicle body on the touchscreen. When the position is appropriate, the square will change from red to green. At this point, simply engage reverse gear and control the vehicle speed to complete automatic parking. Structural Components: The reversing camera system consists of three main parts: the camera device, control unit, and display.
Was this review help?
9
0
Share
More Forum Discussions

What are the causes of BYD Qin Plus DMI malfunctions?

BYD Qin Plus DMI engine malfunctions can be caused by: carbon deposits in the throttle or engine interior; imbalance in the air-fuel mixture due to faulty oxygen sensors; aging insulation of high-voltage wires making them prone to breakdown. Below are detailed explanations of related content: Introduction: If the water temperature gauge and oil pressure warning light are not activated, the vehicle can still be driven, but it is important to control the speed and promptly have it inspected at a maintenance station. Configuration Parameters: Taking the BYD Qin Plus DMI 2021 55KM Flagship model as an example: it is a compact car launched by BYD, with dimensions of 4765mm in length, 1837mm in width, and 1495mm in height. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 81kw, and paired with an E-CVT continuously variable transmission.
9
1
Share

What is the body weight of the Geely Emgrand GL?

The body weight of the Geely Emgrand GL is approximately 1.4 tons. The Geely Emgrand GL adopts a popular fastback line and short-tail design, with an integrated eye-catching LED light guide taillight that enhances the premium texture of the rear. The license plate frame forms smooth lines, while the wide lower grille design and crystal-like LED daytime running lights add a dynamic touch to the front fascia. The side profile features very slender and extended lines, creating a fuller visual effect. The dimensions of this car are 4725 mm in length, 1802 mm in width, and 1478 mm in height, with a wheelbase of 2700 mm. The Geely Emgrand GL is also equipped with a 3.5-inch TFT color screen trip computer, an 8-inch touchscreen, and intelligent connectivity systems such as GNetlink, GLink, and CarPlay.
20
5
Share

How to Use Cruise Control in Volkswagen Teramont?

Volkswagen Teramont cruise control usage method: Set through the control buttons on the left side of the steering wheel. When the speed reaches above 40 km/h, press the SET button to activate cruise control. The +/- buttons can be used to adjust acceleration and deceleration. The function of cruise control is to automatically maintain the vehicle speed as required by the driver after switching it on, without the need to press the accelerator pedal, allowing the car to travel at a fixed speed. The dimensions of the Volkswagen Teramont are 5039mm in length, 1989mm in width, 1773mm in height, with a wheelbase of 2980mm. The Teramont is a mid-to-large-sized SUV equipped with three engines: a low-power version 2.0L turbocharged engine, a high-power version 2.0L turbocharged engine, and a 2.5L V6 turbocharged engine.
13
1
Share

Can Hill Start Assist Be Installed Aftermarket?

Automatic transmission vehicles can have hill start assist installed aftermarket, but whether it's possible depends on the specific model. The hill start assist system is a function derived from the ESP system, allowing the vehicle to start on an incline without using the handbrake and preventing it from rolling backward. The driver can release the brake pedal with their right foot, and the vehicle will maintain braking for a few seconds. The principle of hill start assist: When the vehicle is on an incline, the moment the driver moves their foot from the brake pedal to the accelerator, the hill start assist system automatically maintains brake fluid pressure for 2 to 3 seconds, preventing the vehicle from rolling back due to gravity and inertia. When the accelerator is pressed, the system gradually reduces braking force, and once the hill start assist's brake control ends, the vehicle moves forward smoothly with the accelerator. If the accelerator is not pressed, the automatic brake control of the hill start assist will also end after 2 to 3 seconds, allowing the driver to press the accelerator at a relaxed pace.
1
5
Share

What are the battery issues with the 535le new energy vehicle?

535le new energy vehicle battery issues can lead to transmission system failures and limited electric driving. The following are the characteristics of Beijing's new energy vehicles: 1. Hybrid vehicles: Equipped with batteries that can conveniently recover kinetic energy during downhill driving. In busy urban areas, the internal combustion engine can be shut down, allowing the battery to drive alone, achieving "zero" emissions. 2. Pure electric vehicles: The technology is relatively simple and mature, and they can be charged wherever there is a power supply. They have zero or near-zero emissions, reduce water pollution caused by oil leaks, lower greenhouse gas emissions, and operate smoothly and quietly. 3. Hydrogen-powered vehicles: Their emissions are pure water, producing no pollutants while driving. They feature short charging times, high power density, large capacity, long service life, maintenance-free operation, and are economical and environmentally friendly.
3
1
Share

Used Car Ownership Transfer and License Plate Replacement Process?

Used car license plate replacement process: After completing the vehicle ownership transfer procedures, you can drive the car to the local vehicle management office to apply for license plate replacement. Additional information: 1. Vehicle inspection: After the vehicle inspection is completed, you can go to the vehicle management office hall to select a license plate number. After choosing a good number and paying the license plate fee, you will generally receive the new license plate within 3-5 working days. 2. Before transferring ownership and replacing license plates for a used car: (1) Clear all traffic violations and accident records of the vehicle, and also pay attention to the validity period of the compulsory traffic insurance. The transfer can proceed if the compulsory insurance is still valid; if it has expired, you must provide proof of renewed compulsory insurance. (2) According to the "Motor Vehicle Registration Regulations," the ownership transfer of a used car must be completed at the vehicle management office within thirty days after the transaction.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.