What is the rearcooler switch in a car?

How long can the BAIC EU300 last on a single charge?

The actual range of the BAIC EU300 can reach approximately 300km. The overall design of this vehicle hasn't changed much compared to the current model. The silver grille bars are connected to the central logo and accented with blue, representing its identity as a new energy vehicle. Relevant information about the vehicle's range is as follows: 1. Introduction: Vehicle range refers to the maximum distance that can be traveled with the remaining fuel in the tank at a fuel-efficient speed, mainly calculated by the car's computer based on current fuel consumption. 2. Influencing factors: The vehicle's range is affected by four factors: charging equipment, tire pressure, whether the vehicle is overtaking, and whether it frequently stops and starts abruptly.

8

4

Share

What is the sequence of the C2 Subject 2 driving test?

The sequence of the C2 Subject 2 test items is: reversing into a garage, parallel parking, driving through curves, and making a right-angle turn. Compared to the C1 manual transmission test, the hill start is omitted. According to Article 25 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Ministry of Public Security Order No. 123), starting from June 1, 2021, the C2 and C5 Subject 2 tests no longer assess the hill start and stop. Reversing into a garage is one of the more challenging items in the Subject 2 test, so many test centers place it as the first item. The key points for reversing into a garage are: the steering wheel's full-lock point, the 30 cm correction point, and the stopping point inside the garage. You must follow the prescribed route and sequence. The vehicle must be fully inside the garage without crossing any lines. Parallel parking focuses on aligning the front line of the garage with the rear wheel, spotting the rear corner in the side mirror, and maintaining the distance between the wheel and the left dashed line. There's no need to straighten the wheels after parking, but don't forget to use the turn signal when exiting. After parking, the vehicle body must not cross any lines, and the tires must not touch the lane boundaries during movement. Driving through curves, commonly known as the S-bend, is relatively easy for many students with good driving sense, as they can complete it intuitively. However, some students misjudge the line positions during the actual test, leading to immediate failure by crossing the lines. The key to the S-bend is observing the position of the front hood's reference point relative to the edge lines. The wheels must not touch the road edges. The right-angle turn is even simpler, essentially a simplified version of exiting the garage in the reversing test. The method for finding the reference point is the same as exiting the garage—aligning the front hood's horizontal line with the front line (either exactly on the line or slightly delayed). Ensure the wheels do not touch the road edges. Generally, the C1 Subject 2 requires 16 hours of training, while the C2 Subject 2 requires 14 hours. Completing the required training hours is a basic requirement for taking the Subject 2 test. Training hours can only be increased, not reduced. Additional test items require corresponding extra training hours. Each training hour is 60 minutes, with effective teaching time not less than 45 minutes. If you fail the Subject 2 test, you can retake it once. If you fail again, the test is terminated, and you must reschedule the test after 10 days. If you fail five consecutive test attempts (including retakes, totaling 10 attempts), all previously passed subjects will be invalidated, and you must start over from Subject 1.

4

3

Share

Is CVT Continuously Variable Transmission an Automatic Transmission?

CVT continuously variable transmission comes in both automatic and manual versions. CVT technology, or continuously variable transmission technology, uses a drive belt and variable-diameter primary and secondary pulleys to transmit power, allowing for continuous changes in the transmission ratio. This achieves the best match between the transmission system and the engine's operating conditions. Advantages and disadvantages of CVT continuously variable transmission: 1. Advantages: (1) Since there are no transmission gears like in a conventional automatic transmission, the gear-shifting jerkiness is eliminated, resulting in a very smooth driving experience. (2) Gear settings are more flexible, making it easier to achieve the balance between gear ratios, speed ratios, performance, fuel consumption, and exhaust emissions in traditional transmission systems. (3) The mechanical efficiency and fuel economy of CVT transmission are significantly better than those of conventional automatic transmissions. 2. Disadvantages: (1) Compared to traditional automatic transmissions, maintenance costs are higher, and the probability of issues is greater if operated improperly. (2) CVT transmissions have limited torque capacity and are only suitable for small cars with engine displacements ranging from about 1 liter to 1.5 liters.

5

1

Share

Difference between Mobil 1 and Golden Mobil?

1. Golden Mobil 1 is essentially Mobil 1, with the distinction lying in different viscosity levels. The manufacturer separates the packaging to facilitate consumer differentiation. 2. Mobil 1 is a high-performance oil capable of operating under the most demanding conditions while effectively protecting the engine. Additional Information: Features and Benefits: 1. Contains active cleaning agents to prevent carbon deposits and sludge buildup, keeping the engine clean over the long term and extending its lifespan. 2. Thermal and oxidation stability delays lubricant aging, extending oil change intervals. 3. Low oil consumption reduces hydrocarbon pollution. 4. Friction characteristics enhance fuel efficiency.

20

1

Share

Why Can't Eagle Flag Engine Oil Be Purchased Online?

Different industries have different marketing channels, so some engine oils cannot be purchased online. Here is a partial introduction to engine oil: 1. Composition: Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties, while additives are an important part of the lubricating oil. 2. Types of engine oil: The winter oil grades classified by SAE lubricant viscosity are 0W, 5W, 10W, 15W, etc. The symbol W stands for winter, and the smaller the number before W, the lower the low-temperature viscosity and the lower the applicable minimum temperature. The summer oil grades classified by SAE lubricant viscosity are 20, 30, 40, 50. The larger the number, the higher the viscosity and the higher the applicable maximum temperature.

13

3

Share

Why does the Encores idle fluctuate in the morning?

Check if the three-way catalytic converter is clogged and replace it in time. Here is the relevant information: 1. Engine introduction: The Encore uses two engines in total, one is a 1.0-liter turbocharged engine, and the other is a 1.3-liter turbocharged engine. The wheelbase of the Encore is 2570mm, and the length, width, and height are 4295mm, 1798mm, and 1607mm respectively. 2. 1.0-liter turbocharged engine: The Encore's 1.0-liter turbocharged engine has a maximum power of 125 horsepower and a maximum torque of 180 Nm. The maximum power speed of this engine is 5800 rpm, and the maximum torque speed is 1350 to 4500 rpm.

11

0

Share

What is the rearcooler switch in a car?

How long can the BAIC EU300 last on a single charge?

What is the sequence of the C2 Subject 2 driving test?

Is CVT Continuously Variable Transmission an Automatic Transmission?

Difference between Mobil 1 and Golden Mobil?

Why Can't Eagle Flag Engine Oil Be Purchased Online?

Why does the Encores idle fluctuate in the morning?

What are the new requirements for tires in annual inspections?

Where is the tire pressure reset button for the Arrizo 5?

What RPM is considered aggressive driving for a CVT transmission?

What brand is rock-blade tires?