What is the real reason for the discontinuation of the Buick Excelle XT?

What is the difference between dashed-line parking spaces and solid-line parking spaces?

The differences between dashed-line parking spaces and solid-line parking spaces are as follows: 1. Dashed-line parking spaces: Dashed-line parking spaces are subject to tidal or time restrictions. Parking within the allowed time period is the same as in solid-line parking spaces, but exceeding this time period will result in penalties. 2. Solid-line parking spaces: These are specifically designated for vehicle parking and can be used for long-term parking. Additional information: Regulations for temporary parking of motor vehicles on the road are as follows: 1. Parking is prohibited in sections with no-parking signs or markings, sections with separation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, as well as crosswalks and construction zones. 2. Parking is prohibited at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and within 50 meters of these locations. 3. Parking is prohibited in front of bus stops, emergency stations, gas stations, fire hydrants, or fire stations (houses), and within 30 meters of these locations, except when using these facilities. 4. Doors must not be opened and passengers must not board or alight before the vehicle comes to a complete stop, and opening or closing doors must not obstruct other vehicles or pedestrians.

13

2

Share

Specifications for Engine Overhaul Torque?

After an engine torque overhaul, it must not be less than 90% of the originally designed calibration value. Introduction to Torque: Torque is a special type of moment that causes an object to rotate. The torque of an engine refers to the moment output from the crankshaft end. Under a fixed power condition, it has an inverse relationship with the engine's rotational speed—the faster the speed, the smaller the torque, and vice versa. It reflects the vehicle's load capacity within a certain range. Calculation Method for Torque: At each rotational speed, there is a corresponding torque value. Dividing these values by a length yields the force data. For example, a 1.6-liter engine can produce a maximum torque of approximately 15.0 kg·m. If directly connected to a tire of size 185/60R14 with a radius of about 41 cm, the propulsion force exerted by the wheel would be 15/0.41 = 36.6 kg of force.

19

1

Share

How to Remove Odors from a New Ford EcoSport?

Methods to remove odors from a new Ford EcoSport include: 1. Open the vehicle's doors and windows and expose it to sunlight for three days; 2. Use bamboo charcoal bags to absorb odors; 3. Place vegetables or fruits inside the car; 4. Use vinegar to eliminate odors. In terms of exterior design, the new EcoSport features blackened treatments on multiple areas such as the headlights, sport grille, side window waistline, front and rear bumpers, and roof rails, paired with 17-inch sport-style wheels with a smoked finish. Regarding configuration, the new EcoSport is equipped with an RSC Roll Stability Control system and a TVC Torque Vectoring Control system, complemented by an intelligent four-wheel-drive system, front MacPherson independent suspension, and rear multi-link independent suspension design. In terms of dimensions, the new EcoSport measures 4345mm in length, 1785mm in width, and 1659mm in height, with a wheelbase of 2530mm.

9

0

Share

What Can Corrode Car Paint in Summer?

Acid rain in summer can easily corrode car paint. Repair Methods: Minor scratches can be fixed with nail polish, forming a protective layer on the scratched area to prevent oxidation of the paint. Moderate scratches require the use of a touch-up pen. The color of the touch-up pen must match the car's body color. Before touching up, clean the scratched area and wait for the primer to dry. Then, smooth it with water sandpaper before applying the touch-up pen. Severe scratches that are left unrepaired for a long time can rust and affect the surrounding undamaged paint, so it is recommended to visit a professional repair shop for repainting. Methods for Cleaning Paint Stains: Dried tar can be dissolved using a tar remover, then wiped dry with a cloth. If the car body has been exposed to intense sunlight, the tar may have penetrated the paint and caused corrosion due to the sun's effect. In this case, it is advisable to consult a professional to assess the damage. Use sandpaper specifically designed for car cleaning to remove paint and oil stains, then restore the car's shine by waxing.

7

2

Share

What is the speed limit for motor vehicles within the factory area?

The maximum speed for motor vehicles within the factory area is 15km/h. Speed limit regulations: When driving on the main roads of the factory without speed limit signs, motor vehicles must not exceed 30km/h, and on other roads, the speed must not exceed 20km/h. In adverse weather conditions with visibility less than 5m or visibility less than 10m and a maximum road gradient exceeding 6%, driving should be stopped. Fire trucks, engineering rescue vehicles, and ambulances performing tasks are not subject to the speed limit regulations. Speed limit requirements should comply with: At crossings, intersections, loading and unloading operations, densely populated pedestrian areas, downhill slopes, areas with warning signs, or when turning or making U-turns, freight vehicles transporting flammable, explosive, or other hazardous materials must not exceed 15km/h. On icy, snowy, or waterlogged roads; or in adverse weather conditions with visibility less than 30m, the maximum speed must not exceed 10km/h. When entering or exiting factory buildings, warehouses, workshop gates, parking lots, gas stations, weighing scales, hazardous areas, production sites, reversing, or towing damaged vehicles, the maximum speed must not exceed 5km/h.

4

2

Share

What is the minimum ground clearance of the Mazda CX-4?

The minimum ground clearance of the Mazda CX-4 is 197mm. Below is some related knowledge about ground clearance: Advantages of larger ground clearance: Good passability and convenient parking. A higher ground clearance not only improves passability on gravel or mountain roads but also prevents water from entering the exhaust pipe when driving through flooded areas. It also makes it easier to park on curbs or other uneven parking spots. Disadvantages of smaller ground clearance: With smaller ground clearance, the center of gravity is lower, leading to extremely poor passability. It becomes difficult to drive on gravel or dirt roads. Ground clearance of ordinary sedans: As long as there are no steep slopes, deep pits, or obstacles on the road, excessively large ground clearance is generally not required. It is sufficient to ensure the comfort and stability of the vehicle. Ground clearance of sports cars: Sports cars usually have a ground clearance of around 100mm. However, the low ground clearance of sports cars is designed to improve tire grip, enhance speed, and stability during high-speed cornering. High-speed cornering stability refers to the absence of skidding or rollovers.

19

4

Share

What is the real reason for the discontinuation of the Buick Excelle XT?

What is the difference between dashed-line parking spaces and solid-line parking spaces?

Specifications for Engine Overhaul Torque?

How to Remove Odors from a New Ford EcoSport?

What Can Corrode Car Paint in Summer?

What is the speed limit for motor vehicles within the factory area?

What is the minimum ground clearance of the Mazda CX-4?

What Causes Unstable Idle and Shaking in a Warm Car?

Will there be a record if a new car has a slight scratch repaired at a 4S shop?

Is it necessary to replace the outer CV joint if it makes noise?

How many times can I apply for a temporary license plate?