···
Log in / Register

What is the real fuel consumption of the Yeti?

4 Answers
MacIris
07/23/25 8:40pm
The real fuel consumption of the Yeti is 9L/100km. Here is some relevant information about the Yeti: 1. Powertrain: The vehicle offers two powertrain options: a 1.4T engine and a 1.8T engine. The 1.4T engine delivers a maximum power of 110kW and a maximum torque of 250Nm, while the 1.8T engine provides a maximum power of 118kW and a maximum torque of 250Nm. In terms of transmission, the 1.4TSI engine is paired with a 7-speed DSG gearbox, and the 1.8TSI engine is matched with a 6-speed DSG gearbox. 2. Exterior Design: The Yeti features more straightforward line designs, with a wide and robust front end that appears solid and reliable. The central skid plate under the front bumper enhances the overall visual appeal. Equipped with a 4-cylinder turbocharged engine, the vehicle starts without any sluggishness, delivering a crisp and powerful driving experience, especially during mid-speed driving. The throttle response is direct, matching its exterior design. The cabin noise reduction is well-designed, ensuring minimal noise inside.
Was this review help?
14
4
Share
DeVera
08/10/25 4:18pm
Let me share my experience with the Yeti's fuel consumption. After driving it for several years, the combined fuel consumption generally ranges between 8 to 9 liters per 100 kilometers. It tends to be higher in city traffic, reaching up to 10 liters, but on the highway, it's much more economical, dropping to around 6 liters. The engine model makes a big difference—I drive the 1.4T version, which is relatively fuel-efficient and practical. Driving habits are crucial; for example, avoiding sudden acceleration and hard braking while maintaining smooth driving can save a lot of fuel. Regular maintenance is also important. Check the air filter and engine oil every six months, and keep tire pressure at the recommended level, as underinflation increases rolling resistance. Running the air conditioning too aggressively can also increase fuel consumption, so try using the recirculation mode during hot summer months. Overall, the Yeti isn’t the most fuel-efficient SUV, but it’s decent for daily use. I recommend tracking your own driving data to compare and optimize efficiency.
Was this review help?
2
4
Share
Expand All
LaLandon
09/23/25 3:53am
I've done quite a bit of research on the Yeti's actual fuel consumption, and different engines perform differently. The gasoline engines, like the 1.4T, average around 7.5 to 9 liters per 100 kilometers, but the 2.0T can reach up to 11 liters in city driving. Driving style plays a significant role—highway cruising can bring it down to below 6 liters, while frequent stop-and-go in the city increases consumption. Vehicle weight and road conditions also matter; for example, a fully loaded trunk or uphill driving will raise fuel usage. To maintain efficiency, I regularly replace spark plugs and clean the fuel system to prevent carbon buildup. Tire type also affects consumption—using low rolling resistance tires can reduce it by about 0.5 liters. Compared to other similar models, the Yeti is average—not particularly fuel-efficient but not wasteful either. Share your experience to exchange more practical insights.
Was this review help?
7
4
Share
Expand All
DiCamila
11/06/25 6:09am
The fuel consumption of the Yeti feels decent for city driving, averaging just over 8 liters per 100 kilometers. During rush hour commutes, it can spike to 10 liters, but drops below 7 liters on highway trips during weekends, which is quite economical. Routine maintenance is straightforward—using genuine engine oil to keep the engine running smoothly and not neglecting tire care. Running the AC increases fuel consumption by about 1 liter; in summer, using less recirculation mode can actually help. Carrying passengers or heavy loads also increases fuel usage, so managing weight is important. I think it's a convenient travel car for young people—its fuel consumption isn't unreasonable, and maintaining steady driving habits helps save money.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

How is the power performance of the Corolla Hybrid?

Corolla Hybrid adopts the new-generation THS II hybrid system with a 1.8L Atkinson cycle engine. Below are the relevant specifications: 1. Maximum Power: The maximum power output is 98 horsepower at 5,200 rpm, with peak torque of 142 Nm at 3,600 rpm. 2. High-Speed Electric Motor: The compact, lightweight high-speed electric motor delivers maximum power of 53 kW (72 horsepower) and peak torque of 163 Nm. Extended information about the performance: 1. Performance: The Corolla Hybrid's naturally aspirated engine and electric motor work in perfect harmony, offering exceptional smoothness. The electric motor assistance also optimizes power response, making throttle input more intuitive and creating a relaxed driving atmosphere. 2. Power: Compared to conventional 1.5L models, the Corolla Hybrid's acceleration time from 0-100 km/h is slightly over 11 seconds.
2
2
Share

How Often Should Motorcycle Gear Oil Be Changed?

Motorcycle gear oil should be changed every 6,000 to 10,000 kilometers. Below is an introduction to related content: 1. Function: Gear oil primarily serves to lubricate gears and bearings, prevent wear and rust, and assist in dissipating heat from the gears. 2. Motorcycle Tire Pressure Standards: Front wheel pressure: 170 kPa; rear wheel pressure: 200 to 220 kPa. Below is extended information on the effects of insufficient motorcycle tire pressure: 1. Distance: Significant reduction in coasting distance. 2. Effect: Weakened coasting effect on downhill sections. 3. Flat Ground: Difficulty felt when pushing the vehicle on flat ground. 4. Wear: Severe tire wear. 5. Tires: Causes premature tire damage. 6. Blowouts: Generates excessive heat during long-distance travel, increasing the risk of blowouts.
1
2
Share

What Type of Engine Oil is Suitable for Cars in Winter?

Winter engine oil models typically have a multi-grade viscosity of 5W-30. Below is a partial introduction to winter engine oil models: 1. State: In winter, temperatures are low, and conventional engine oil may turn into a semi-solid, semi-fluid state, reducing its flowability. Poor-quality oil might even stop flowing entirely. 2. Viscosity: It is best to choose engine oil with low base oil viscosity, a low pour point, and strong anti-wear performance. Most car owners in China opt for multi-grade viscosity oils like 5W-30 or 10W-40. The number before the 'W' in the oil grade represents the oil's low-temperature flowability.
14
5
Share

How to Determine the Turning Distance While Driving

To judge the turning distance while driving, you need to estimate the distance between the front of the car and a person. Taking a sedan as an example, assume there is a person ahead who is about 1.7 to 1.8 meters tall, with their feet at approximately 10 cm, knees at around 45 cm, and hips at about 70 cm. Here are some tips for turning while driving: 1. Follow the outside-inside-outside principle for steering: If you want to pass through a curve quickly and minimize centrifugal force during the turn, make full use of the road width by steering in a large arc to approximate a straight line. 2. Release the throttle and downshift when approaching an uphill curve: Accelerate quickly out of the uphill curve after entering. Before entering the curve, release the throttle to allow the vehicle to enter the curve at a higher speed along the outer side, then downshift to first or second gear. Next, choose your path and correct the direction while gently pressing the throttle.
17
2
Share

What Causes the Abnormal Noise When a BMW 3 Series Goes Over Bumpy Roads?

The main reasons for abnormal noise when a BMW 3 Series goes over bumpy roads are as follows: 1. Body noise: This is usually caused by insufficient body rigidity, leading to deformation of the vehicle while driving, friction or shaking between the doors and the frame, or friction between steel plates due to some areas being unwelded. Applying adhesive strips on the doors and windows or placing rubber pads in the friction areas may help reduce or eliminate the noise. 2. Engine compartment noise: There are many possible causes for noise here. A high-pitched belt squeal is generally caused by belt slippage. If there is a sound of dry metal friction outside the engine while it is running, it is usually a sign of damage to the generator, water pump, or power steering pump bearings. 3. Suspension noise: If there is a 'thud' or 'click' sound near the four wheels when encountering bumps, it is mostly due to shock absorber issues or loose suspension components. Be sure to have it thoroughly inspected at a professional repair shop. Suspension components are not only related to ride comfort but also to driving safety, so they should never be overlooked.
17
0
Share

How Many Horsepower is 100 Pi?

Horsepower generally refers to metric horsepower, where 1 horsepower = 1 pi = 0.735 kW. Therefore, 100 horsepower equals 73.5 kW, which is also the maximum power output of a car. Below is an introduction to related content: 1. Family Cars: Most family car engines can achieve 100 horsepower, which is not particularly high. 2. Performance Indicator: Horsepower is a parameter used to measure engine performance, and it can be converted into power. Power is an indicator that measures how much work an engine can perform per unit of time. Horsepower is a commonly used unit for measuring power in engineering. It typically refers to metric horsepower rather than imperial horsepower. By definition, 1 metric horsepower is the power required to perform 75 kilogram-force·meters of work in 1 second.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.