What is the real fuel consumption of the Volvo XC40?

1 Answers
EmeryFitz
07/30/25 6:21am
The comprehensive fuel consumption of the Volvo XC40 is 6.6-7.4L/100km. There are currently 6 models of the Volvo XC40 on sale. The comprehensive fuel consumption of the Smart Travel Fashion Edition is 6.6L/100km. The comprehensive fuel consumption of the Four-Wheel Drive Smart Travel Fashion Edition, Four-Wheel Drive Smart Luxury Edition, Four-Wheel Drive Smart Sport Edition, Four-Wheel Drive Smart Premium Sport Edition, and Four-Wheel Drive Smart Premium Luxury Edition is 7.4L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The real fuel consumption is higher than this value, ranging from 7.5-11.0L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits. Excessive carbon deposits in the engine are a major cause, primarily due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not noticeable, it indicates a significant amount of carbon deposits in the engine. In this case, the car must be taken to a 4S store for professional cleaning of the engine carbon deposits by technicians. Check the oxygen sensor. As an internal control unit of the car, the oxygen sensor mainly monitors the air-fuel ratio of the engine. Once damaged, it will cause an imbalance in the air-fuel ratio, leading to a sudden increase in fuel consumption. When the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gases during driving, and the oxygen sensor should be replaced immediately. Regularly replace the three filters. During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they can become dirty and send incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit. Although the engine's electronic control unit is highly reliable, in older vehicles, various faults may inevitably occur.
Was this review help?
11
0
Share
More Forum Discussions

What is an ABS Electronic Stability Program Fault?

Refers to the Anti-lock Braking System. Below is relevant information about ABS: Introduction: The Anti-lock Braking System, abbreviated as ABS. Its function is to automatically control the braking force during vehicle braking, preventing wheel lock-up and maintaining a state of rolling and sliding (with a slip ratio around 20%), ensuring maximum adhesion between the wheels and the road surface. Classification: ABS control channels are categorized into four-channel, three-channel, two-channel, and single-channel types. Functions: Maximizes braking efficiency, reducing braking time and distance; effectively prevents vehicle skidding and fishtailing during emergency braking, ensuring good driving stability; allows steering during emergency braking, providing excellent steering control.
2
1
Share

What brands of 4.2-meter refrigerated trucks can be purchased?

You can purchase brands such as JAC, Dongfeng, Foton, Isuzu, JMC, and Dayun. Below are precautions for using refrigerated trucks: Before loading: Pre-cooling or pre-heating for approximately 1.5 hours is necessary. Since the vehicle is parked outdoors, the temperature inside the truck is usually influenced by the external environment. The ambient temperature of the truck can affect the transportation temperature of the goods, potentially altering their quality. Therefore, the truck must be pre-cooled to the required temperature before loading. When using the refrigerated truck: Keep the compartment floor clean. Due to the operation of the evaporator fan, air circulates inside the truck, which can cause debris or dirt on the floor to be drawn into the evaporator fan. Over time, a significant amount of impurities may accumulate in the evaporator coils, affecting the cooling efficiency of the refrigeration unit.
11
5
Share

What does Honda HISS mean?

Here is an introduction about Honda HISS: Introduction: HISS stands for "Honda Ignition Security System," which is an electronic anti-theft system. It consists of three main components: a microchip transponder embedded in the key fob, which contains a serial number and authentication key; an ECU (Engine Control Unit) module; and a sensing coil located near the lock. After normal engine shutdown, if the HISS flashes a red light, it indicates that the chip-based anti-theft system is active. Function: The purpose of HISS is to prevent thieves from starting the vehicle. If a thief attempts to hotwire the car or use lock-picking tools to bypass the main circuit, the anti-theft program in the ECU will immediately read the microchip information in the key via the sensing coil.
3
2
Share

Is the BYD DM-i powerful enough for highway driving?

BYD DM-i is powerful enough for highway driving. Here is some relevant information about BYD DM-i: Overall trend: BYD DM-i products account for 47.13% of all BYD new energy vehicles and 28.7% of total sales. It can be said that the strategy of DM-i products has achieved significant breakthroughs in just three months. The sales of the DM-i series are gradually beginning to impact the sales of fuel vehicles and other non-DM-i models. The sales of the Qin fuel version continue to remain at around 200-300, while the sales of the Song EV and DM models are also decreasing. Product structure: From the perspective of product structure, the registration volume of fuel vehicles is significantly higher than the wholesale sales volume, which basically indicates a 'clearance inventory stage'.
3
1
Share

What is the reason for the high fuel consumption of BYD F0?

BYD F0 consumes a lot of fuel due to burning engine oil. The following is an introduction to BYD F0: Introduction to BYD F0: BYD F0 is a premium compact car launched by BYD Company. BYD F0 incorporates the most popular European design elements, gathering international classic trends, with a compact, rounded, and sleek appearance. Specific introduction to BYD F0: Cool exterior: The U-shaped front face design gives a somewhat cool feeling. The large wrap-around design of the front bumper, inspired by rally cars, is full of sportiness. Interior space: The interior design of F0 is also very user-friendly. There are oversized storage spaces on both sides of the dashboard, and the unique tachometer design highlights the sporty personality. The exterior rearview mirrors are adjustable from inside the car, making operation convenient and the configuration practical.
6
4
Share

What type of oil should be used in a forklift transmission?

Heavy-duty gear oil or hydraulic transmission fluid should be used in a forklift transmission. Here are the relevant details: Types of forklift transmissions: Forklift transmissions are divided into two types. One is the traditional manual transmission, which has a gear structure inside with fewer gears, so gear oil can be used. However, since forklifts often operate in environments where they lift heavy loads, ordinary oil is insufficient, and heavy-duty gear oil must be used. Different transmission types require different oil specifications, and mixing different types is not allowed. The other type is the hydromechanical transmission, which is essentially a simple two-speed automatic transmission. The engine's power is transmitted to the transmission through a torque converter, and gear shifts are controlled hydraulically inside the transmission. It requires hydraulic transmission fluid for driving and lubrication. Never use ordinary transmission oil. Using the wrong oil can cause significant damage. The main functions of transmission oil: to keep the shifting system clean, lubricate the transmission components, and extend their lifespan. Regular maintenance is essential.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.