What is the real fuel consumption of the Vios automatic transmission?

1 Answers
ORichard
07/29/25 2:57pm
Toyota Vios real fuel consumption: The 1.3L manual transmission model has a fuel consumption of 6.1 liters per 100 kilometers, while the automatic transmission model consumes 6.3 liters per 100 kilometers. The 1.5L manual transmission model consumes 6.3 liters per 100 kilometers, and the automatic transmission model consumes 6.7 liters per 100 kilometers. Reasons and solutions for increased vehicle fuel consumption: 1. Driving habits, low tire pressure, and the use of low-quality fuel. Solution: Change poor driving habits and ensure the vehicle has appropriate tire pressure. 2. Ignition system failures and electronic control system failures can increase fuel consumption. Solution: Have the vehicle inspected at a repair shop to identify and fix the specific issue. 3. If the vehicle is not maintained on time, such as not replacing the air filter, fuel filter, spark plugs, and clutch plates promptly, it can also lead to increased fuel consumption. Solution: Replace these wear-prone parts in a timely manner.
Was this review help?
11
3
Share
More Forum Discussions

Is the Upper Limit of Tire Pressure Monitoring Adjustable for Haval H6?

Haval H6's tire pressure monitoring upper limit is not adjustable. Tire pressure monitoring automatically monitors the tire pressure in real-time while driving and alerts the driver in case of tire leakage or low pressure to ensure driving safety. According to the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. There are three common types of tire pressure monitoring systems: Direct TPMS: Direct TPMS uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the data for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect TPMS: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the differences in rotation speed between tires, the system monitors the tire pressure. Indirect TPMS essentially relies on calculating the rolling radius of the tires to monitor pressure. Tire Pressure Monitoring System (TPMS) Overview: This system combines the advantages of both direct and indirect TPMS. It equips direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to a full direct system, this hybrid approach reduces costs and overcomes the limitation of indirect systems, which cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time pressure data for all four tires as effectively as a full direct system.
17
2
Share

What does it mean when the car's windshield displays the speed?

When the car's windshield displays the speed, it refers to the head-up display function, commonly known as HUD. Maintenance methods for the windshield include: 1. Applying a protective film to the windshield; 2. Avoiding parking in areas with heavy oil smoke; 3. Keeping away from kitchen exhaust vents; 4. Promptly cleaning off bird droppings, insects, etc. The repair methods for the windshield are: 1. Cleaning and wiping the area around the scratch; 2. Using tape to outline the scratch and define the repair area; 3. Using a grinding pad to remove the scratch and polishing the glass with polishing paste; 4. Applying glass scratch repair agent along the crack and allowing it to slowly seep in; 5. Applying a small amount of toothpaste to the scratch, wiping it with a soft cloth, and rinsing with water.
12
0
Share

What colors are available for the Changan Yuexiang V5?

Changan Yuexiang V5 offers 6 color options: Sparkling Aegean Blue, Sparkling Neon, Amethyst Black, Sparkling Crystal Silver Gray, Sparkling Titanium Gray, and Moonlight White. The Changan Yuexiang V5 is a compact car equipped with a 1.5L naturally aspirated engine across all variants, delivering a maximum power of 114 horsepower and a peak torque of 145 Nm. Its front fascia design bears strong resemblance to the new Mazda 3, featuring a smiling grille design that, while differing slightly from the new Mazda 3, maintains a similar stylistic approach. The headlight design is more distinct and angular, enhancing its robust appearance.
1
2
Share

Is there a difference between an evaporator and a condenser?

Evaporators and condensers are different, as they serve distinct purposes. The evaporator is used to absorb heat, while the condenser is used to release heat. The evaporator consists of two parts: a heating chamber and an evaporation chamber. The heating chamber provides the necessary heat for evaporation, causing the liquid to boil and vaporize. The condenser is a component of the refrigeration system that converts gas or vapor into liquid, transferring heat from the tubes to the surrounding air quickly. Evaporators can be categorized into three types based on operating pressure: atmospheric, pressurized, and vacuum, and are widely used in industries such as chemical and light industries. Condensers are typically made of materials like carbon steel, stainless steel, and copper. However, when carbon steel tube sheets are used in coolers, the welds between the tube sheets and the tubes may occasionally corrode and leak, leading to environmental pollution.
16
0
Share

Where is the license plate with the code 'Zhe N' from?

Currently, there is no license plate with the code 'Zhe N' in Zhejiang Province. The license plate codes for various regions in Zhejiang Province are as follows: Zhe A for Hangzhou, Zhe B for Ningbo, Zhe C for Wenzhou, Zhe D for Shaoxing, Zhe E for Huzhou, Zhe F for Jiaxing, Zhe G for Jinhua, Zhe H for Quzhou, Zhe J for Taizhou, Zhe K for Lishui, and Zhe L for Zhoushan. Vehicle license plates consist of a combination of numbers and letters, totaling five characters. The numbers range from 0 to 9 (10 digits), and the letters range from A to Z (26 letters). License plates used on vehicles are composed of both letters and numbers. The Chinese character at the beginning of the plate represents the province, while the following letter denotes the prefecture-level city. Each prefecture-level city within a province uses a different letter. Some cities with a higher number of vehicles may use two letters.
11
0
Share

What are the differences between the gears in a manual transmission car?

In a manual transmission car, the first gear is the starting gear, the second gear is the driving gear, the third gear is the acceleration gear, the fourth gear is the medium-high speed driving gear, the fifth gear is the high-speed gear, and the R gear is the reverse gear. Introduction to the gears in a manual transmission car: First gear: The first gear is the starting gear, used when the car moves from a stop or climbs a steep slope. The speed is generally around 10 km/h. Second gear: The second gear is the driving gear. It is used as a transitional gear after the car starts to accelerate or for low-speed driving. The speed is generally around 20 km/h. Third gear: The third gear is the acceleration gear. Starting from this gear, you can accelerate by pressing the throttle to increase the car's speed to a certain level. This gear is used at speeds between 20-40 km/h and is commonly used for city driving. Fourth gear: The fourth gear is the medium-high speed driving gear. This is generally the highest gear used on urban roads except for elevated roads. Depending on the vehicle's speed, it is typically used at around 60-70 km/h. Fifth gear: The fifth gear is the high-speed gear. It is used only on elevated roads or highways, generally at speeds of 80 km/h or above. R gear: The reverse gear, used when reversing the car. Principle of gear shifting in cars: The principle of gear shifting in cars is achieved by changing the transmission gears. The tire drive shaft has gears for different gear positions. When the engine speed remains unchanged, engaging different gears with the engine results in the larger gear obtaining a lower circumferential speed than the smaller gear. In low gears, the gear is larger, and the engine drives a larger radius with a smaller radius, allowing the car to obtain greater driving force. In high gears, the engine drives a smaller radius, resulting in a faster circumferential speed but less driving force.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.