···
Log in / Register

What is the real fuel consumption of the UNIK?

4 Answers
LucilleAnn
08/29/25 3:12am

The real fuel consumption of the UNIK is 8.4L-11L. Below are the relevant details: Exterior: The new UNI-K still adopts the "Boundary Breaking" design concept, which is quite avant-garde in the automotive industry. The front face is full of technological appeal while maintaining elegance, with the grille giving a slight impression of a new energy vehicle, and the headlights featuring sharp angles. Interior: In terms of interior design, the UNI-K presents an even more futuristic design concept. How futuristic is it? If you cover the logo, few would believe this is a mass-produced domestic vehicle. The instrument panel on the dashboard adopts a more split design style, offering a completely different visual experience compared to the UNI-T, and the steering wheel design is even more sci-fi.

Was this review help?
6
4
Share
MacTyler
09/10/25 7:53am

Speaking of the fuel consumption of my UNI-K, after driving it for over a year, I feel the actual data is significantly higher than the official claims. During daily commutes in congested urban areas, it typically ranges from 10 to 11 liters per 100 kilometers, and can spike to 12 liters with the air conditioning on in summer. However, it performs much better during highway cruising, stabilizing at around 8 liters. I've specifically recorded the data after refueling for a week, showing that urban fuel consumption is generally higher, with frequent red lights and braking/accelerating being the most fuel-intensive. Similar experiences are shared in the car owners' group, with the actual combined fuel consumption averaging around 9.5 liters. It's recommended to regularly maintain the air filter and tire pressure, as fuel consumption tends to slightly decrease after minor maintenance.

Was this review help?
13
2
Share
Expand All
VonJasper
10/24/25 8:45am

As a car enthusiast, I've tested the fuel consumption performance of the UNIK in different driving modes. In Eco mode, urban road conditions average about 9 liters per 100 km, but switching to Sport mode can push fuel consumption up to 12 liters - you get faster acceleration response at a significant cost. Maintaining a steady 80 km/h on highways keeps consumption optimal at around 7.5 liters. The key factors affecting real-world fuel economy are engine tuning and driving habits: sudden throttle inputs and frequent gear changes will make fuel consumption skyrocket. Compared to other SUVs, the UNIK's average combined fuel consumption falls within the 9-10 liter range - not the lowest but acceptable. Carrying less cargo during daily use can also help reduce fuel consumption slightly.

Was this review help?
3
5
Share
Expand All
DaisyAnn
12/08/25 2:21am

After driving the UNI-K for three months on my daily 20-kilometer round-trip commute in the city with frequent traffic lights, the average fuel consumption is about 11 liters per 100 kilometers. This is significantly higher than the advertised 6 liters. On weekend highway trips, it drops to around 8 liters. My driving habits are fuel-efficient: gentle acceleration and avoiding congested routes. Using the air conditioning on rainy days increases fuel consumption by about 10%.

Was this review help?
3
5
Share
Expand All
More Forum Discussions

How long does it take to review a personal incremental quota application?

For personal incremental quota applications submitted before 24:00 on the 8th of each month, the review results will be announced on the 23rd of the same month and included in that month's quota allocation. Applications submitted after the 9th of the month will have their review results announced on the 23rd of the following month and included in the next month's quota allocation. Additional information: According to regulations, individuals who meet the following conditions can apply for incremental quotas. Individual businesses applying for incremental quotas will follow the same regulations as personal applications. Applicants must be residents of the city, including: 1. Local registered residents; 2. Active-duty military personnel stationed in the city (including armed police forces); 3. Residents from Hong Kong, Macao, Taiwan, overseas Chinese, and foreigners who hold valid identification and have continuously resided in the city for more than two years, with a cumulative residence of at least nine months each year; 4. Non-local registered residents who hold a valid local residence permit and have continuously paid social insurance in the city for more than 24 months (excluding retroactive payments).
8
3
Share

What brand is Kawasaki engine?

Kawasaki engines are produced by Kawasaki. The following is an introduction about Kawasaki: 1. Introduction: Kawasaki Heavy Industries, Ltd. (TYO: 7012) is a Japanese heavy industry company. Kawasaki Heavy Industries originated during the Meiji Restoration era and focuses on heavy industry as its main business, with historical connections to JFE Steel (formerly Kawasaki Steel) and Kawasaki Kisen Kaisha. 2. Content: It mainly manufactures aerospace products, railway vehicles, construction machinery, motorcycles, ships, and mechanical equipment. 3. Brand culture: "Kawasaki" is the Chinese transliteration, and its Romanized name is "KAWASAKI". The company's name is derived from the name of its founder, Shozo Kawasaki.
3
2
Share

What is the fuel consumption of the Buick Envision?

Buick Envision 20T has a MIIT comprehensive fuel consumption of 6.6L/100km. Buick Envision 28T has a MIIT comprehensive fuel consumption of 8.8L/100km. The fuel consumption calculated by MIIT is not the result of actual road testing, but is calculated in the laboratory using certain equipment, so it can only serve as a reference. The actual fuel consumption will be higher than the MIIT figure, and individual driving habits will also affect the fuel consumption level. Relevant information about fuel consumption is as follows: 1. Introduction: Fuel consumption generally refers to constant-speed fuel consumption, which is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. 2. Testing method: The test can be conducted on the road or on a chassis dynamometer, and then the fuel consumption per 100 kilometers is calculated using the "flow meter method" or "carbon balance method".
17
1
Share

How much can you exceed the 120 speed limit in a section speed measurement?

In a 120 speed limit section speed measurement, you can exceed the limit by 10%. Below are specific details about section speed measurement: 1. Definition: Section speed measurement involves setting up two adjacent monitoring points on the same road section. The system calculates the average speed of a vehicle over that section based on the time it takes to pass between the two points. It then determines if the vehicle has violated the speed limit, displaying real-time traffic violation information on LED screens to notify and warn offending vehicles. 2. System Introduction: The section speed measurement system uses cameras installed at checkpoints to establish a monitoring and capture system. It monitors, captures, and records vehicles passing through the checkpoint area in real-time, collecting data such as vehicle speed, traffic flow, license plate numbers, color, approximate physical dimensions, and driver characteristics.
13
3
Share

Is the Car AC Light On or Off?

When the AC indicator light in a car is illuminated, it means the car's air conditioning system is turned on. The AC button serves as the switch for the car's air conditioning. The AC switch controls the cooling function, commonly referred to as turning on the cold air. The AC switch operates the compressor, which is a key component of the car's air conditioning refrigeration system, responsible for compressing and circulating refrigerant vapor. Generally, the system includes cooling, heating, and ventilation devices. The working principle of a car's air conditioning system can be divided into the following four processes: Compression Process: The compressor draws in low-temperature, low-pressure refrigerant gas from the evaporator outlet and compresses it into high-temperature, high-pressure gas before expelling it from the compressor. Heat Dissipation Process: The high-temperature, high-pressure refrigerant gas enters the condenser, where it condenses into a liquid due to the reduction in pressure and temperature, releasing a significant amount of heat. Throttling Process: The high-temperature, high-pressure refrigerant liquid passes through an expansion device, causing its volume to increase and its pressure and temperature to drop sharply, exiting the device as a fine mist (tiny droplets). Heat Absorption Process: The mist-like refrigerant liquid enters the evaporator. Since the boiling point of the refrigerant is much lower than the temperature inside the evaporator, the refrigerant liquid evaporates into a gas, absorbing a large amount of surrounding heat in the process. The resulting low-temperature, low-pressure refrigerant vapor then re-enters the compressor. This cycle repeats continuously to achieve the goal of lowering the temperature of the air around the evaporator. Precautions for Using Car Air Conditioning: Do not set the air conditioning temperature too low. A large temperature difference between the inside and outside of the car can easily cause the driver to catch a cold, and excessively low temperatures may also pose a risk of arthritis for passengers. Control the direction of the air vents. Based on the principle that cold air sinks and hot air rises, when using the air conditioning, direct the vents upward when cooling and downward when heating. Avoid turning on the air conditioning immediately after the car has been exposed to the sun. After prolonged exposure, the interior temperature of the car can become very high. First, open the windows to ventilate and allow the hot air to escape before turning on the air conditioning.
2
3
Share

What is the purpose of a motorcycle auxiliary water tank?

The auxiliary water tank serves as a liquid reservoir. When the coolant expands due to high water temperature, the excess coolant flows into the auxiliary tank. Conversely, when the water temperature drops, some coolant returns to the cooling system through the pipeline. Below is a relevant introduction to the auxiliary water tank: 1. Function: When the engine temperature rises and the liquid expands, a portion of the coolant flows into the auxiliary tank through the radiator cap. When the temperature decreases and the cooling system pressure becomes negative, the system draws coolant from the auxiliary tank back into the cooling system via the radiator cap. Additionally, the auxiliary tank has corresponding markings indicating the liquid level, providing a clear indication of whether the current water level is sufficient. 2. Working principle: Thermal expansion and contraction. During vehicle operation, the increase in water temperature raises the internal pressure of the radiator, causing some water to flow out through the diversion pipe connected to the upper water chamber of the radiator. When the vehicle stops, the radiator's temperature drops, reducing the internal pressure, which allows the water in the auxiliary tank to flow back into the radiator.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.