What is the real fuel consumption of the Roewe i6max?

1 Answers
VonJuliana
07/29/25 4:43pm
The comprehensive fuel consumption of the Roewe i6max is 5.9L/100km. There are currently 4 models of the Roewe i6max on sale: the Cool Edition, Cool Intelligent Driving Edition, Cool Panoramic Sunroof Edition, and Cool Panoramic Sunroof Intelligent Driving Supreme Edition, all with a comprehensive fuel consumption of 5.9L/100km. The above figures are based on the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The real fuel consumption is higher than this value, ranging from 5.9-6.1L/100km. Here are 5 tips to help reduce fuel consumption while driving: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration, light braking, and early braking: While driving, gently press the accelerator to avoid sudden increases in engine RPM and prevent the car from shaking, making it more fuel-efficient. By anticipating road conditions and applying slow and even acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (approximately 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular vehicle maintenance or checks: Timely oil changes can reduce carbon buildup (carbon buildup can cause ignition issues, sluggish acceleration, increased fuel consumption, and even cylinder misfires in severe cases). Regularly check and replace the air filter, clean or replace the fuel injectors, spark plugs, and throttle body as per the recommended mileage. Keep windows closed while driving. Driving with windows open increases wind resistance, which in turn increases the resistance the car faces, requiring more power and thus increasing fuel consumption.
Was this review help?
9
5
Share
More Forum Discussions

What is the MIIT fuel consumption of the 10th generation Accord?

The comprehensive fuel consumption of the 10th generation Accord as per MIIT standards ranges between 4.2 to 6.4 liters per 100 kilometers. Below are the details about the 10th generation Accord: 1. 2021 10th generation Accord: It is a mid-size sedan. 2. Body dimensions: Length 4893mm, width 1862mm, height 1449mm, wheelbase 2830mm, minimum ground clearance 150mm, curb weight 1495kg. 3. Configuration: The 2021 10th generation Accord features a MacPherson strut front suspension and a multi-link rear suspension. 4. Powertrain: Equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 194PS, maximum torque of 260Nm, and maximum power of 143kW, paired with a continuously variable transmission (CVT).
15
5
Share

Why is there a red light flashing inside the car after it is locked?

It is normal to see a red light flashing inside the car after it is locked, as this is the indicator light for the anti-theft locking system. Below are the specific details about the anti-theft locking system: 1. Anti-theft authentication: For vehicles equipped with a keyless system, pressing the unlock button or the keyless button on the driver's side door handle will open the door, deactivate the vehicle's security status, switch the power to the ON state, and complete the engine's anti-theft authentication. The anti-theft indicator light on the dashboard will then turn off. 2. Automatic locking: After unlocking, if any door, window, or ignition switch is not opened within 30 seconds, the doors will automatically lock again, reactivating the security status.
18
1
Share

What causes the grinding sound when shifting into reverse gear?

The reasons for the grinding sound when shifting into reverse gear are as follows: 1. Clutch failure: This refers to mechanical issues with the clutch that prevent it from disengaging properly, causing gear engagement noise. 2. Operational reasons: Improper use of the clutch, meaning the driver shifts gears before the clutch is fully disengaged. Relevant information about reverse gear is as follows: 1. Reverse gear: Also known as the backing gear, it is one of the three standard gears in a car, identified as R on the gear console. 2. Function: The reverse gear has a single and simple function, which is to make the vehicle move in the opposite direction, enabling it to reverse. In manual transmission models, the reverse gear also serves as a hill-hold function, allowing the drive shaft to be mechanically locked when parking on a downhill slope by engaging the reverse gear.
8
4
Share

What's the matter with stepping on the gas pedal but the car not moving?

Detailed explanations about the car not moving when stepping on the gas pedal are as follows: 1. Intake system problem. The air filter among the three filters needs frequent cleaning and replacement. If the air filter is clogged or the throttle system is blocked, the air intake will decrease, combustion will be insufficient, and power will drop. 2. Fuel system problem. After long-term use, carbon deposits may form on the fuel injectors, leading to clogging. This reduces fuel intake and causes insufficient atomization, naturally decreasing combustion efficiency and making the vehicle feel powerless. 3. Ignition system problem. If the car doesn't move when stepping on the gas and emits black smoke, it might be an ignition system issue. Carbon deposits on the spark plugs can cause poor ignition, resulting in decreased power and persistently high fuel consumption.
10
4
Share

Why was the 4WD version of the Tayron 330 discontinued?

The reasons for discontinuing the 4WD version of the Tayron 330 are as follows: Supply shortage: The Tayron 330 4WD version used the more advanced imported DQ500 transmission. Due to the impact of the pandemic, the DQ500 transmission was in short supply, leading to the discontinuation of the 330 4WD. Increased manufacturing costs for 4WD: The 4WD version of the Tayron does not just add a Haldex limited-slip differential, but also includes a central drive shaft, Haldex system, two rear drive shafts, and a rear differential. This cost accounts for approximately 6%-10% of the total vehicle cost. DQ500: The DQ500 is a 7-speed wet dual-clutch transmission developed based on the design experience of the DQ250. It adopts a transverse layout and can withstand a maximum torque of 600 N.m.
12
0
Share

How to Connect the BinYue Smart Band?

BinYue Smart Band connection to the vehicle must be matched through the 4S store after-sales service. Below is the relevant introduction about the BinYue Smart Band: 1. General Functions: After connecting the BinYue Smart Band to the vehicle, you can remotely lock and unlock the car. Press and hold the lock icon/unlock icon to normally lock/unlock the vehicle. 2. Special Functions: After connecting the BinYue Smart Band to the vehicle, you can also remotely start and shut down the engine. This is a practical function in winter, allowing you to remotely start the car from outside the window to warm it up before getting in. 3. Other Functions: Remote automatic window roll-up and roll-down. When you forget to close the windows after getting out of the car, you can use the smart band to remotely roll up the windows. When the car is exposed to the sun in summer or if you want the car to breathe fresh air in advance, you can use the smart band to open the windows remotely.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.