What is the real fuel consumption of the Polo 1.6 automatic transmission?

1 Answers
Terri
07/29/25 3:50pm
The average fuel consumption of the Polo 1.6 automatic transmission is 6.3-7.7L/100km. However, since fuel consumption is related to multiple factors, the actual fuel consumption should be based on real-world usage. The factors affecting fuel consumption are as follows: 1. Rough roads consume more fuel: Poor road conditions or uneven surfaces force the vehicle to drive in low gears for extended periods, inevitably increasing fuel consumption; 2. Using the trunk as storage increases fuel consumption: Loading the trunk with unnecessary items adds weight to the car. It's important to note that vehicle weight is directly proportional to fuel consumption. A 10% reduction in weight can lead to a corresponding percentage drop in fuel consumption; 3. Incorrect driving habits can double or triple fuel consumption: Poor driving habits have the most significant impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues.
Was this review help?
13
0
Share
More Forum Discussions

What is the minimum ground clearance of the ix35?

The minimum ground clearance of the ix35 is 170mm, and it features a MacPherson strut independent front suspension. Here is more information about this vehicle: 1. There are two engine options available: 2.0L and 2.4L. Both engines are the new Theta II generation dual CVVT all-aluminum four-cylinder gasoline engines. 2. The 2.0L engine has a maximum output power of 120kW (163 horsepower) at 6200rpm and a maximum torque of 194Nm at 4600rpm. 3. The 2.4L engine delivers a maximum output power of 128kW (174 horsepower) at 6000rpm and a maximum torque of 226Nm at 4000rpm.
3
2
Share

What kind of engine oil should be used for the Peugeot 408 1.6T?

The 1.6T model of the Peugeot 408 is recommended to use fully synthetic engine oil 5W-30, which should be replaced every 10,000-12,000 kilometers or every six months. The following is an introduction to the functions of engine oil: 1. Lubrication to reduce wear. The relative sliding between the piston and cylinder of the engine, as well as between the main shaft and bearing shells, causes wear. Engine oil forms a thick oil film between the two sliding surfaces, separating the surfaces of the relatively sliding parts to reduce wear. 2. Cooling and temperature reduction. The engine oil carries heat back to the oil tank and then dissipates it into the air, helping the radiator to cool the engine. 3. Cleaning. The engine oil circulates carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank, flushing away dirt generated on the parts through the flow of the lubricating oil. 4. Shock absorption and buffering. When the pressure at the engine cylinder port rises sharply, it suddenly increases the load on the piston, piston rings, connecting rod, and crankshaft bearings. The load is transmitted through the bearings, and lubrication helps to cushion the impact load.
7
3
Share

How to activate cruise control on BMW 320?

Here's how to use cruise control on BMW 320: 1. Accelerate to over 40 km/h, then press the SET button to lock current speed; 2. Press RES/+ or SET/- buttons for fine speed adjustments; 3. Cruise control indicator illuminates on instrument panel with displayed speed; 4. Cancel by braking or pressing cancel button. Additional specs (2021 BMW 320): Mid-size sedan with dimensions 4719mm (L) x 1827mm (W) x 1459mm (H), 2851mm wheelbase, 1506mm front/rear track, 63L fuel tank, 460L trunk capacity, and 1465kg curb weight.
18
1
Share

What engine does the Landwind X7 use?

All new models of the Landwind X7 are equipped with a 1.5-liter turbocharged engine, while the older models use a 2.0-liter turbocharged engine. Here are the details about these two engines: 1. The 1.5-liter turbocharged engine delivers 163 horsepower and a maximum torque of 250 Nm. This engine can output maximum power at 5400 to 5700 rpm and maximum torque at 1500 to 4000 rpm. It features direct fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. 2. The 2.0-liter turbocharged engine produces 190 horsepower and a maximum torque of 250 Nm. This engine can output maximum power at 5500 rpm and maximum torque at 2800 to 4400 rpm. It is equipped with multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block.
11
4
Share

What brand does MG belong to?

MG is a brand of Shanghai Automotive Industry Corporation (SAIC) and is domestically produced. Currently, MG produces models such as the MG7 series, MG3 series, MG6 series, and MGTF sports cars. The production base for the Chinese market is located in Nanjing, while the international market base is in Longbridge, UK. The MG5 is equipped with two types of engines: 1. A 1.5-liter naturally aspirated engine with a maximum power of 88 kW, reaching peak power at 6000 rpm, and a maximum torque of 150 Nm, achieved at 4500 rpm. 2. A 1.5-liter turbocharged engine with a maximum power of 127 kW, reaching peak power at 5600 rpm, and a maximum torque of 275 Nm, available between 1750 to 4000 rpm.
3
5
Share

Where is the fuse box located in the Elantra?

The fuse box of the Elantra is located on the right side of the engine compartment. After opening it, you can find the corresponding fuse by referring to the diagram. Here is more information about automotive fuse boxes: 1. An automotive fuse box is used to install car fuses. Based on the size of the fuses, they can be categorized into: small automotive fuse boxes, medium automotive fuse boxes, and large automotive fuse boxes. 2. Common injection molding materials include: plastic, nylon, bakelite, and PBT engineering plastic. Each material has different levels of heat resistance. When selecting an automotive fuse box, factors such as the current rating of the fuse and the size requirements of the fuse should be considered to choose the appropriate fuse box.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.