What is the real fuel consumption of the Haval H9 diesel version?

What does average speed mean?

Average speed refers to the average speed of a car over the last 100 kilometers of travel. Below is more information about vehicle speeds on different roads: 1. Highways: On highways, the maximum speed for small passenger vehicles must not exceed 120 kilometers per hour, other motor vehicles must not exceed 100 kilometers per hour, and motorcycles must not exceed 80 kilometers per hour. On roads with two lanes in the same direction, the minimum speed for the left lane is 100 kilometers per hour; on roads with three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 kilometers per hour, and the minimum speed for the middle lane is 90 kilometers per hour. 2. Roads: On roads without a central dividing line, the speed limit for urban roads is 30 kilometers per hour, and for highways, it is 40 kilometers per hour; on roads with a central dividing line, the speed limit for urban roads is 50 kilometers per hour, and for highways, it is 70 kilometers per hour. 3. Speed limit of 30 kilometers per hour: When entering or exiting non-motorized lanes, passing through railway crossings, sharp curves, narrow roads, or narrow bridges, making U-turns, turning, or descending steep slopes, encountering fog, rain, snow, dust, or hail with visibility within 50 meters, or driving on icy, snowy, or muddy roads, or towing a malfunctioning motor vehicle, the speed limit is 30 kilometers per hour.

10

5

Share

How often should car tire pressure be checked?

It is best to check the tire pressure of your car once a month. What to do if the tire pressure is insufficient: If no damage is visible, you can simply inflate the tire to the normal pressure and reset the tire pressure system. If you find that the tire has been punctured during inspection, you should promptly drive to a tire shop for repair and then reinflate the tire. If the tire pressure warning reappears some time after inflation but there is no puncture, it may be due to air leakage caused by a deformed wheel rim. In this case, it is recommended to check the wheel rim and replace it if necessary. Tire pressure reset: Tire pressure reset is the operation of resetting the tire pressure monitoring system after addressing a tire pressure fault. Tire pressure reset method: First, turn on the ignition switch. Then, press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the fault light on the dashboard will turn off, indicating that the tire pressure reset is complete.

17

1

Share

What Causes Engine Vibration in the Sagitar?

The causes of engine vibration in the Sagitar are as follows: 1. Dirty air filter: The air filter is designed to protect the engine and reduce wear. It is generally replaced every 10,000 kilometers. If not replaced in time, insufficient air intake can cause low idle speed, leading to engine vibration. Simply replacing the filter can solve the problem. 2. Worn spark plugs: After 30,000-40,000 kilometers, the ignition efficiency of spark plugs significantly decreases, affecting ignition. This is the most common issue, and replacing all spark plugs can resolve it. 3. Low idle speed: The engine idle speed is preset in the computer. When the RPM drops below a certain range, the car's computer automatically adjusts it. If the idle speed is too low and causes vibration, it indicates that it is beyond the computer's control range. 4. Abnormal water temperature: The engine operates within a normal temperature range. High water temperature can cause early ignition timing, changes in the air-fuel mixture, thinning of engine oil viscosity, and reduced lubrication performance. 5. Clogged fuel injectors: The fuel injectors in an electronic fuel injection vehicle are key components for fuel injection and have a long lifespan, reaching hundreds of thousands of kilometers. However, gum in gasoline can clog the injector nozzles, causing inconsistent fuel injection among injectors, leading to uneven cylinder operation and engine vibration. The solution is to remove and clean them. 6. Carbon deposits and oil sludge clogging: Over time, carbon deposits and oil sludge can clog the throttle body, idle air control valve, and intake ports, restricting air intake and affecting idle stability, causing vibration. Inspecting and cleaning these parts with a cleaning agent can solve the problem without the need for removal.

12

1

Share

Which Button Opens the Trunk?

Opening the trunk can be done using the following buttons: Remote Key Outside the Car: The method to open the trunk from outside the car is through the remote key, which is also the most common way to open the trunk. Simply press the raised car trunk symbol on the car key to activate the opening button and open the trunk. Some car models may not have a dedicated trunk opening button on the remote key; in such cases, pressing the unlock button may also open the trunk. Additionally, some car models feature smart sensing keys, where the trunk can be opened by pressing the switch on the trunk as long as the remote key is within a certain range. Internal Control Switch: The internal control switch for opening the trunk includes button-type and lever-type options. The position of the button-type switch may vary depending on the manufacturer and car model, but it is generally located on the left side of the steering wheel or in the central control area. For example, in the case of the Sagitar, its trunk button is mostly located on the door.

4

Share

Is the Subject 3 Exam Judged by the Safety Officer or the Computer?

Currently, the deduction of points in driving school exams is directly based on the steps operated by the computer system. Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle exam. Here are the precautions for the Subject 3 exam: Inspection before getting in the car: Before getting in the car, you need to inspect around the car for a full circle. Because there are two sensors on the exam vehicle, the candidate must be detected by the sensors during the inspection to complete this step. Failure to do so will result in point deduction. Adjustments after getting in the car: Once in the car, first adjust the seat to a suitable angle and position, then fasten the seat belt. This is the most crucial step. Not fastening the seat belt will directly result in a failing grade. After that, adjust the rearview mirror and the gear before starting the engine. Body movements: During the exam, candidates must perform certain body movements, such as looking back for observation. These movements must be done correctly to avoid point deductions due to improper actions. Follow the voice prompts: During the exam, candidates must operate according to the voice prompts and follow the steps one by one. Premature operation will result in point deduction. Maintain a good mindset: During the exam, it is essential to stay calm. Many candidates become overly nervous upon hearing the voice prompts and may forget the next steps. Candidates must prepare mentally before the exam.

16

0

Share

Which has a higher rotation speed, 15:25 or 15:24?

The 15:25 ratio has a higher rotation speed for rotary tillers. Functions of rotary tillers: Rotary tillers are agricultural implements paired with tractors to perform plowing and harrowing operations. They are widely used due to their strong soil-breaking capability and the ability to create a flat surface after tilling. Additionally, they can chop up root stubble buried beneath the soil surface, facilitating the operation of seeders and providing a good seedbed for subsequent sowing. Classification of rotary tillers: Based on the configuration of their tiller blades, rotary tillers are categorized into three types: horizontal-axis, vertical-axis, and inclined-axis. Proper use and adjustment of rotary tillers are crucial for maintaining their technical condition and ensuring tillage quality. Roles of rotary tillers: Rotary tillers help break the plow pan, restore soil structure, improve water retention and moisture conservation, eliminate certain weeds, reduce pests and diseases, level the ground surface, and enhance the standards of agricultural mechanization.

5

3

Share

What is the real fuel consumption of the Haval H9 diesel version?

What does average speed mean?

How often should car tire pressure be checked?

What Causes Engine Vibration in the Sagitar?

Which Button Opens the Trunk?

Is the Subject 3 Exam Judged by the Safety Officer or the Computer?

Which has a higher rotation speed, 15:25 or 15:24?

How Many Seconds Should the Clutch Be Released in Subject Three?

How do new energy vehicles charge?

Is Rolling Back During Hill Start an Immediate Failure?

How to Check Motorcycle Traffic Violations?