What is the real fuel consumption of the Haval H6 2.0T?

2 Answers
LilyMarie
07/28/25 8:34pm
Haval H6 2.0T has a combined fuel consumption of 6.6-7.1L/100km. There are currently 5 models of Haval H6 2.0T on sale. The two-wheel drive Max version has a combined fuel consumption of 6.8L/100km. The GT version and Champion version have a combined fuel consumption of 7.1L/100km. The four-wheel drive Max and four-wheel drive Supreme+ versions have a combined fuel consumption of 7.3L/100km. The above figures are NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The real fuel consumption is higher than this value, ranging from 8.2-10.0L/100km. Vehicle fuel consumption is directly related to five major factors: driving habits, the vehicle itself, road conditions, natural wind, and ambient temperature. Specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when approaching traffic lights will increase fuel consumption. The vehicle itself: Vehicles with larger displacement generally consume more fuel than those with smaller displacement because larger displacement usually means greater power output, requiring more gasoline for combustion. Heavier vehicles also have higher fuel consumption as greater driving torque is needed. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low ambient temperature: When the engine block temperature is low during cold starts, the injected gasoline is harder to atomize, requiring more fuel for combustion and increasing consumption. Additionally, the engine ECU will control higher idle speeds to warm up the engine in cold weather, which also increases fuel consumption.
Was this review help?
18
1
Share
Landon
08/12/25 1:19am
As a frequent driver of the Haval H6 2.0T, I've been driving it for nearly two years, and the real fuel consumption really depends on the situation. During my daily city commute with heavy traffic, the average can reach 11-13 liters per 100 kilometers, which is much higher than I expected. On weekends when driving on the highway, it drops to a stable 8-9 liters. I think it's mainly due to the slightly heavier body and the 2.0T engine's pursuit of power, which consumes more fuel with frequent starts and stops in the city. I've also noticed that turning on the air conditioning can increase fuel consumption by 1-2 liters, especially during long summer trips, which really hurts the wallet. For friends considering buying, I suggest first evaluating your driving habits and test-driving more to get a feel. The more fuel-efficient version might be better suited for daily commuting.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

What are the detailed introductions of BYD's eco and sport modes?

Here are the detailed introductions of BYD's eco and sport modes: 1. EV+ECO mode is the energy-saving mode in pure electric drive. In this mode, the car uses electric power to drive, and the onboard computer adjusts the engine parameters to reduce engine efficiency, thereby saving energy. This is the most energy-efficient mode for the vehicle. 2. EV+SPORT mode is the sport mode in pure electric drive. In this mode, electric power is used to provide energy, and the onboard computer adjusts the engine parameters to improve engine efficiency, thereby enhancing vehicle performance. 3. HEV+ECO mode is the energy-saving mode in hybrid drive. The vehicle uses a combination of electric power and fuel as hybrid power sources. The onboard computer adjusts the engine parameters to reduce engine efficiency, thereby saving energy. 4. HEV+SPORT is the sport mode in hybrid drive. The vehicle uses a combination of electric power and fuel as hybrid power sources. The onboard computer adjusts the engine parameters to increase energy consumption and enhance horsepower. This is the mode with the highest energy consumption.
5
0
Share

Do Automatic Cars Use Handbrakes?

Automatic cars do use handbrakes. The correct way to use a handbrake: 1. When pulling the handbrake, the button on the handbrake lever will move back and forth due to the spring inside. To prolong the lifespan of the spring and the button, press the button with your thumb while pulling the handbrake. 2. Avoid yanking the handbrake abruptly, as this can damage it over time. The correct method is to pull the handbrake gently and smoothly until you hear a clear clicking sound. The handbrake, professionally known as an auxiliary brake, operates differently from the main brake system. It uses a steel cable connected to the rear brake shoes to apply braking force to the vehicle. Prolonged use of the handbrake can cause the steel cable to undergo plastic deformation, which is irreversible. This long-term usage can reduce its effectiveness and increase the handbrake's travel distance.
13
4
Share

What are the differences between the Mercedes-Benz C180 and C260?

The differences between the Mercedes-Benz C180 and C260 are as follows: 1. Different power: The Mercedes-Benz C180 is equipped with a 1.6T inline 4-cylinder turbocharged engine with a maximum power of 115KW; the Mercedes-Benz C260 is equipped with a 1.5T inline 4-cylinder turbocharged engine with a maximum power of 135KW. 2. Different appearance: The Mercedes-Benz C180 has a single sunroof; the Mercedes-Benz C260, except for the sports version, all other models have a panoramic sunroof. 3. Different dimensions: The exterior dimensions of the Mercedes-Benz C180 are 4783mm in length, 1810mm in width, and 1442mm in height; the C260 has exterior dimensions of 4784mm in length, 1810mm in width, and 1457mm in height.
1
3
Share

How many seat belts are there in the back of a car?

If the car is a 5-seater, there are usually 3 seat belts in the back seat. The seat belt in the middle position of the back seat comes in two forms: one is a two-point type, and the other is a three-point type. The retraction points of these two types of seat belts are different from those of the seat belts on the two sides, so they are often overlooked. Here are the correct ways to use seat belts: When using a seat belt, first adjust the height of the seat belt. The shoulder belt must cross the middle of the shoulder. In the event of sudden braking, if the seat belt is too high, it will strangle the neck, and if it is too low, it cannot prevent the body from leaning forward. Moreover, the waist belt must be fastened below the abdomen, especially for pregnant women and overweight people. Incorrect usage can easily lead to injuries.
11
3
Share

What Are the Disadvantages of Stock Cars?

Stock cars parked for a long time may lead to the aging of equipment such as batteries, tires, and wiring, posing safety hazards. Here is some extended information about stock cars: 1. Stock Cars: There is no clear legal definition for stock cars, but the term "stock car" does exist in the automobile sales industry. Generally, it refers to vehicles that have been manufactured for more than 12 months, while those produced over 2 years ago are considered severely stocked cars. The manufacturing date is usually marked on the nameplate in the engine compartment, and the time elapsed since then indicates the actual stocking period of the vehicle. 2. Precautions When Purchasing a Car: If the contract does not specify the manufacturing date of the car, it is not possible to claim rights under the contract law; conversely, if the contract stipulates that the car must be new, you can request the seller to replace it with a new one on the grounds of breach of contract.
20
1
Share

What to Do If the Car ETC Falls Off?

If the ETC falls off, it cannot be used anymore. You need to bring the original vehicle, the ETC device, and the bound bank card to the ETC device installation location to reactivate the device. The ETC installation process is as follows: After receiving the device, first check whether the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly turn on. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then peel off the protective film on the back of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.