What is the real fuel consumption of the BYD Song 1.5T?

What is the difference between 1.8L and 1.8T displacement?

The differences between 1.8L and 1.8T displacement are as follows: 1. The 1.8T engine is a turbocharged engine equipped with a turbocharger, while the 1.8L engine is a naturally aspirated engine. 2. When the turbocharger of the 1.8T engine engages, its maximum output power reaches 130 horsepower, whereas the 1.8L engine has a maximum output power of 136 horsepower. 3. Long-term maintenance costs. The 1.8L engine generally offers better reliability, whereas the 1.8T models incur significantly higher maintenance costs, typically requiring 95-octane gasoline and full synthetic engine oil for routine servicing.

13

0

Share

How to Cancel the Seat Belt Warning in Ford Edge?

Ford Edge seat belt warning cancellation method is: 1. Fasten the seat belt properly; 2. Insert the safety buckle into the seat belt buckle. Taking the 2021 Ford Edge as an example, its body structure is a 5-door, 5-seat SUV, with body dimensions of: length 4878mm, width 1925mm, height 1734mm, wheelbase 2850mm, and fuel tank capacity of 69l. The 2021 Ford Edge features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0l turbocharged engine, delivering a maximum horsepower of 245ps, maximum power of 180kw, and maximum torque of 390nm.

10

4

Share

How to Reset the Maintenance Reminder on a Haval Vehicle?

Methods to reset the maintenance light on a Haval vehicle: 1. Turn off the ignition and press and hold the button at the lower right corner of the instrument panel. 2. Turn the ignition to the ON position until all instrument panel lights illuminate, then release the button once the wrench symbol on the instrument panel stops flashing. 3. Press the button at the lower left corner of the instrument panel until the wrench symbol disappears. 4. Use the vehicle's computer to reset. 5. Visit a 4S shop to have it reset using a diagnostic tool. The "SERVICE" indicator on the instrument panel is the maintenance cycle indicator. When the ignition is in the ON position, the "SERVICE" indicator will flash, and it will disappear after starting the engine, indicating that the vehicle requires maintenance. After maintenance, the maintenance light should be reset.

14

1

Share

Can the Auto Start-Stop System Be Turned Off?

Vehicle auto start-stop systems can be turned off. The function of the auto start-stop system is to automatically shut off the engine when the vehicle comes to a temporary stop during driving, and then automatically restart the engine when it's time to move forward again. This system achieves fuel savings and emission reduction by putting the engine into automatic hibernation. The car engine is the device that provides power to the vehicle, converting other forms of energy into mechanical energy, and determines the car's power, fuel efficiency, stability, and environmental friendliness. Depending on the power source, engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid systems.

7

4

Share

How to Use an Emergency Car Jump Starter?

To use an emergency car jump starter, follow these steps: 1. Turn off high-power consumption devices such as navigation and air conditioning, clean the dust from the car's power terminals, and ensure the starter's power display shows at least 3 bars; 2. Attach the red clamp from the emergency jump starter to the positive terminal of the car's battery and the black clamp to the negative terminal; 3. Start the car within 30 seconds, then remove the clamps and the emergency jump starter. The emergency car jump starter is a multifunctional portable power source designed for car enthusiasts and business travelers, primarily used to start a car when the battery is dead and unable to power the vehicle.

4

5

Share

How to Remove and Install the Rear Wiper of Trumpchi GS4?

Here is the method for replacing the rear wiper of Trumpchi GS4: 1. Fully raise the wiper arm; 2. Adjust the angle of the wiper blade, preferably to a 90-degree angle with the wiper arm for easy removal and installation; 3. Lift the entire wiper blade with one hand, while using the other hand to horizontally pry open the rubber blade. Then, press down firmly on the main bracket with one hand to separate the wiper blade from the arm, allowing for removal. Install the new wiper blade afterward. Here is some related information: Wipers generally include vacuum wipers, electric wipers, and wipers with electronic control units. The drawback of vacuum wipers is the unstable movement speed of the blade. When the engine's vacuum decreases, the blade may stop, obscuring the driver's vision. Vacuum wipers were phased out in 1972 and replaced by electric wipers.

6

0

Share

What is the real fuel consumption of the BYD Song 1.5T?

What is the difference between 1.8L and 1.8T displacement?

How to Cancel the Seat Belt Warning in Ford Edge?

How to Reset the Maintenance Reminder on a Haval Vehicle?

Can the Auto Start-Stop System Be Turned Off?

How to Use an Emergency Car Jump Starter?

How to Remove and Install the Rear Wiper of Trumpchi GS4?

Should an automatic transmission car be started in N gear or P gear?

How many interior color options are available for the Hongqi HS7?

What does a circle with an exclamation mark on a car indicate?

What is the method to turn off the car maintenance indicator light?