What is the real fuel consumption of the BMW X3?

2 Answers
SanRose
07/24/25 1:32am
BMW X3 has a combined fuel consumption of 8.4-8.7L/100km. Currently, there are 3 models of BMW X3 available for sale: the xDrive30i Leading M Night Edition, the modified xDrive30i Premium M Night Edition, with a combined fuel consumption of 8.7L/100km. The xDrive25i M Sport Package has a combined fuel consumption of 8.4L/100km. The above figures are the NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The real fuel consumption is higher than this value, ranging from 9.5-14.0L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive carbon deposits in the engine are a significant cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not obvious, it indicates a significant amount of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional cleaning of the carbon deposits by technicians. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio of the engine. Once damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. After the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gas during driving, and the oxygen sensor should be replaced at this time. Regularly replace the three filters: During the use of the vehicle, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they become dirty and send wrong information to the engine control unit, causing incomplete fuel combustion and increased carbon deposits in the engine. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in older vehicles, various faults may inevitably occur.
Was this review help?
4
5
Share
Emma
08/10/25 9:13pm
I've been driving a BMW X3 for almost two years, mainly for commuting in the city and weekend outings, with an average fuel consumption of around 10 to 11 liters per 100 km. It's particularly fuel-intensive during rush hour traffic jams, and with the air conditioning on, it can soar to 13 liters. However, it's much more economical on the highway, with cruise control set at 100 km/h consuming about 8.5 liters. When I first got the car, the fuel consumption was alarmingly high, but it dropped a bit after the break-in period. Now, after more than 10,000 kilometers, the fuel consumption is quite stable. Switching to regular tires instead of run-flat tires saves about 0.5 liters, and 95-octane gasoline lasts longer than 92-octane. My personal advice is not to obsess over the displayed fuel consumption; recording the mileage at each refueling is the most accurate method.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

How to Adjust the Time on Volkswagen Magotan's Dashboard?

There is one button each at the bottom left and right corners of the dashboard. Simply use these two buttons to quickly adjust the time. Below is some relevant information about the Volkswagen Magotan: 1. Design: The Magotan adopts groundbreaking cutting-edge design, interpreting fashion aesthetics with grandiosity, perfectly blending design aesthetics with luxury quality. It has won multiple top international design awards, including the prestigious "Red Dot" award, known as the "Oscar of the International Industrial Design Community," the renowned "iF" Industrial Design Gold Award, the European Car of the Year Award, and the AUTOBILD Golden Steering Wheel Award. 2. Technology: The Magotan has always been synonymous with "technological innovation" in China's mid-to-high-end car market. The new-generation Magotan is equipped with a series of high-end intelligent technologies surpassing its class, such as the FPK digital LCD dashboard, third-generation ACC advanced adaptive cruise control, and a 360-degree panoramic parking system—features typically reserved for C-segment cars are now incorporated into this B-segment vehicle, once again leading the trend in forward-looking intelligent driving. 3. Powertrain: The entire lineup comes standard with engine start-stop and SSR 2.0 second-generation brake energy recovery technology. The powertrain system has been comprehensively upgraded, perfectly balancing performance and fuel efficiency to maximize energy conservation and environmental protection. The new-generation Magotan, which debuts the advanced second-generation DCC dynamic chassis system, allows drivers to switch between comfort, standard, and sport modes, achieving a seamless transition between driving pleasure and comfort.
3
2
Share

Where is the Water Temperature Sensor Located on the Grand Cherokee?

Near the compensation water tank, the function of the water temperature sensor is to convert the cooling water temperature into an electrical signal, which is then input into the ECU for the following purposes: 1. Adjusting the fuel injection amount: Increases the fuel injection amount when the temperature is low. 2. Adjusting the ignition timing: Advances the ignition timing when the temperature is low, and retards it at high temperatures to prevent knocking. 3. Affecting the idle control valve: At low temperatures, the ECU controls the idle control valve based on the water temperature sensor signal to increase the engine speed. Water temperature sensors are divided into two main types. Regardless of the type, their internal structure consists of a thermistor with a resistance range between 275 ohms and 6500 ohms. The resistance increases as the temperature decreases and decreases as the temperature rises.
15
5
Share

How to Change the Envision Dashboard to Chinese?

Steps to change the Envision dashboard to Chinese: 1. Press the left or right buttons until you reach the page displaying multiple English function words. 2. Use the up and down buttons to highlight the word "Settings" and press the OK button to enter the settings function. 3. Select the Language/Laulaoge setting. 4. Scroll to the last option, "Chinese," and press the OK button to confirm. Below is information about the Envision: 1. The new model brings a texture more akin to Buick's flagship, with smoother and more dynamic overall lines, exuding urban luxury. The redesigned front grille adds a fashionable touch while maintaining the urban SUV appeal favored by younger drivers. The two boomerang-style headlights stand out in both design and technology, creating a highly recognizable and visually striking body and appearance. 2. For the interior, the new model comes standard with an 8-inch HD touchscreen, with the Elite and Premium trims offering an optional 10-inch HD touchscreen. The Premium trim also includes a streaming rearview mirror. The new model is equipped with OnStar and eConnect technology as standard, providing smarter human-vehicle interaction. 3. The new model also features the eProtect intelligent safety system, supporting functions such as SBZA side blind zone warning, APA automatic parking, RCTA parking warning, and HSA hill start assist, enhancing vehicle safety. In terms of power, the new model is equipped with a 1.5T engine delivering a maximum power of 169 horsepower and a maximum torque of 250N·m, paired with a 7-speed dual-clutch transmission.
5
2
Share

Is the 2019 Nissan Sylphy compliant with China VI emission standards?

The 2019 Nissan Sylphy is compliant with China VI emission standards, but there are also models that meet China V standards. Below is information about the Sylphy: 1. The 2019 Sylphy shows almost no changes in exterior design and dimensions, featuring a three-bar shield-shaped front grille with rounded irregularly shaped headlights on both sides, equipped with high-brightness halogen light sources. The lines on the engine hood extend towards the center, giving the car a strong sense of power. The side profile is sleek, with a prominent waistline running from the front fender to the taillight, and the front and rear wheel arches are slightly protruding, enhancing the three-dimensional effect. 2. The car is equipped with practical features such as ABS, EBD, a trip computer display, and a brake assist system. It uses a front MacPherson strut suspension and a rear torsion beam suspension, offering good handling. Two engine options are available: a 1.6L naturally aspirated engine with a maximum power of 93kW and torque of 154Nm, and a 1.8L naturally aspirated engine with a maximum power of 102kW and torque of 174Nm. 3. Thanks to the new aviation-grade aluminum engine and the next-generation XTRONIC CVT transmission, fuel efficiency remains commendable. The top 1.6L variant comes with an ISS start-stop system, achieving a fuel consumption of just 5.6L per 100km.
2
5
Share

How to Reset the Maintenance Light on a Toyota Levin?

Toyota Levin maintenance light reset method is as follows: 1. Press the "A" button and hold the brake pedal, neither should be released midway. 2. Do not start the engine, but the vehicle's power must be turned on. 3. At this point, the dashboard or characters will start flashing. 4. Continue holding the reset button "A" until "..." appears on the display. 5. Release the brake pedal and the "A" button simultaneously. 6. The maintenance light reset operation is complete, turn off the vehicle's power. The maintenance light reminds the owner that a new maintenance interval has been reached, and it is recommended to service the vehicle promptly. Some models can only be reset using the vehicle's dedicated computer system, and manual resetting of the maintenance light is not possible.
18
1
Share

How to Resolve P0011 Intake Camshaft Position System Performance Issue?

It is caused by a malfunction of the Oil Control Valve (OCV), where the plunger is stuck in the timing advance position. Here are the solutions: 1. Input Command: Input the command from the Engine Control Module (ECM). 2. Adjustment Method: Adjust the camshaft angle by altering the oil pressure to the camshaft adjuster. 3. Final Result: Perform a series of operations to ensure the valves open and close at the optimal time. Common camshaft faults include abnormal wear, unusual noises, and fractures. Symptoms of abnormal wear often precede unusual noises and fractures.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.